PHILIPS BPS639 City Swan LED Gen3 User Manual

: June 9, 2024
: Philips

Table of Contents

PHILIPS BPS639 City Swan LED Gen3
Product Information
Product Usage Instructions
For products with TAG Label
Disconnect before servicing
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PHILIPS BPS639 City Swan LED Gen3

Product Information

The CitySwan LED gen3 is an outdoor luminaire designed for use in various environments. It is available in three different models: BPS, BRS, and BWS639. The luminaire operates on either 220V or 240V, with a frequency of 50Hz or 60Hz. It has an IP66 rating, which means it is dust-tight and protected against powerful water jets from any direction. Additionally, it has an IK08 rating, which means it is protected against 5J impact.
The luminaire uses LED technology, with the LED board being manufactured by ledgine. It is available in different LED colors, including red, and has a maximum power consumption of +/-10%. The is also R&TTE compliant, ensuring its quality and safety.
The product comes with a range of LED options to choose from, with different wattage and luminous flux (lm) values. The maximum of luminaires on MCB 16A type B with resp FP/SR driver is noted in the product manual.
The CitySwan LED gen3 is supplied with a dedicated wall bracket for installation, which must be ordered separately. The product manual provides detailed instructions on installation procedures and safety precautions.

Product Usage Instructions

Before using the CitySwan LED gen3, ensure that you have read the product manual carefully and followed all installation procedures and safety precautions.
The luminaire is suitable for use in outdoor environments and can be mounted using the dedicated wall bracket provided with the product. Ensure that the bracket is installed correctly and securely, as per the instructions provided in the product manual.
The product is available in different LED wattage options, depending on your requirements. Choose the appropriate wattage option according to your needs.
The CitySwan LED gen3 is easy to operate and requires minimal maintenance. However, if you are unsure about anything related to the product’s operation or maintenance, refer to the product manual or contact the manufacturer or supplier for further assistance.

Max number of luminaires on MCB 16A type B with resp FP/SR driver
Energy class of the light source

For products with TAG Label

To get an overview of all spare parts for a luminaire, please refer to detailed instructions in the service manual available via the Signify Service tag apps (Android and iOS). To program a spare driver is supported by Signify Service tag (Android only)

Disconnect before servicing

Luminaire has basic insulation between Low Voltage supply and control conductors.
The light source and/or control gear and/or the external flexible cable contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Storage, installation, use, operation and maintenance of the products needs to be performed exactly according the instructions in this manual and/or other instructions as may be provided by us to guarantee safe use of the product over its entire lifetime. Failure to adhere to these instructions will invalidate your to warranty. Bolts with indication of torque strength on the drawing need to be tightened using a calibrated torque wrench. Pre-assembled bolts to be retightened again to the required torque specification to assure maximum strength over lifetime.
Zhaga-D4i and SR certified compatibility – For Zhaga-D4i/SR-Certified based luminaires only Zhaga-D4i/SR-Certified components/sensors are to be used (see also: https://www.zhagastandard.org/products / https://www.lighting.philips.co.uk/oem-emea/products/driving-connected- lighting). The functional compatibility of two SR-certified and/or Zhaga-D4i controllers/sensors to be used in combination, as well as the override possibility of any line-switch function used in an SR-based/Zhaga-D4i luminaire, is to be released by the master controller/sensor supplier. If using a NEMA 7-pin socket on an SR-based luminaire, a full system verification is required. Not following this advice can/will cause risk of damage and non- compliance for which Signify cannot take any responsibility.

© 2020 Signify Holding
All rights reserved. This document contains information relating to the product portfolio of Signify which information may be subject to change. No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.. All other trademarks are owned by Signify Holding or their respective owners.
Signify Holding
The Netherlands