DRAPER 57652 230V Tri Bas Sander Instruction Manual
- June 9, 2024
- DRAPER
Table of Contents
DRAPER 57652 230V Tri Bas Sander
These instructions accompanying the product are the original instructions. This document is part of the product, keep it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed, and contains all the necessary information to ensure its correct and safe use. By following all the general safety instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools policy of continuous improvement determines the right to make modifications without prior warning.
INTRODUCTION
SCOPE
Part of our core range, this product is suitable for enthusiasts and
tradespersons alike. Any application other than that it was intended for, is
considered misuse.
This product is not a toy and must not be used by children or any person with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge, or people unfamiliar with these instructions.
Local regulations may restrict the age of the operator.
UNDERSTANDING THIS MANUALS SAFETY CONTENT
Warning! – Information that draws attention to the risk of injury or
death.
Caution! – Information that draws attention to the risk of damage to the
product or surroundings.
EXPLANATION OF SYMBOLS
-
Read the instruction manual. -
Wear face mask and suitable eye/face protection. -
Wear ear defenders. -
Wear protective gloves. -
Long and loose hair must be contained or securely tied back. -
Keep out of the reach of children. -
Warning! -
Machine weight. -
Sound power value.
-
Class II construction (Double insulated). -
WEEE-
Waste Electrical & Electronic Equipment.
Do not dispose of Waste Electrical & Electronic Equipment in with domestic rubbish. -
For indoor use only.
Do not expose to rain. -
UK Conformity Assessed.
-
European conformity.
SPECIFICATION
- Stock No ……………………………………………………….. 57652
- Part No . …………………………………………………… TPS200D
- Motor: Rated voltage ……………………………………. 230V-
- Rated frequency …………………………………….. 50Hz
- Rated input …………………………………………. 200W
- Orbits per minute (no load) ……………. 12,5000/min
- Pad size ………………………………………… 100x150x150mm
- Sound pressure level (LpA): ………………………. 77.?dB(A)
- Sound power level (LWA): …………………………. 88.?dB(A)
- Uncertainty (K): ……………………………………………. 3dB(A)
- Vibration level ……………………………………….. 13.455m/s2
- Weight ………………………………………………………. 1.375kg
HEALTH AND SAFETY INFORMATION
GENERAL SAFETY
INSTRUCTIONS FOR POWER TOOL USE
Warning! Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
The term “power tools” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
-
Work area safety
-
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
-
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
-
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
-
Electrical safety
-
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
-
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
-
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
-
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
-
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
-
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
-
Personal safety
-
Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. -
Use personal protective equipment Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection use for appropriate conditions will reduce personal injuries.
-
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
-
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool
may result in personal injury. -
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
-
Dress properly. Do not wear loose clothing or jeweler. Keep your hair and clothing away from moving parts. Loose clothes, jeweler or long hair can be caught in moving parts.
-
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
-
Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
-
Power tool use and care
-
Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
-
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
-
Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
-
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
-
Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
-
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
-
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
-
Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
-
Service
-
Have your power tool serviced by a qualified repair person using only identical replacements parts. This will ensure that the safety of the power tool is maintained.
ADDITIONAL SAFETY INSTRUCTIONS FOR BELT AND DRUM SANDERS
warning!
- Safety instructions for all operations
- Hold the power tool by insulated gripping surfaces, because the sanding surface may contact its own cord. Cutting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
RESIDUAL RISK
Important: Although the safety instructions and operating manuals for our
tools contain extensive instructions of safe working with power tools, every
power tool involves a certain residual risk which can not be completely
excluded by safety mechanisms. Power tools must therefore always be operated
with caution!
CONNECTION TO THE POWER SUPPLY
Caution: Risk of electric shock. Do not open.
This appliance is supplied with an approved plug and cable for your safety.
Never use a damaged or incomplete plug.
This appliance is Class llt and is designed for connection to a power supply matching that detailed on the rating label and compatible with the plug fitted.
Carefully select an extension lead. Some machines are not suitable for use
with extension leads. If the tool is designed for use outdoors, only use an
extension lead suitable for that environment in conjunction with an RCD
adaptor. When using an extension lead, select one capable of handling the
current (amps) drawn by the machine in use. Ensure the cable is fully unwound
regardless of the distance between the power supply and the tool. Excess
current (amps) and a coiled extension lead will cause the cable to heat up and
can result in fire.
Keep extension leads away from moving hazardous parts to avoid damages to the
cable which can lead to contact with live parts. Position cable safely to
avoid tripping over.
Double insulated :This product requires no earth connection as supplementary insulation is applied to the basic insulation to protect against electric shock in the event of failure of the basic insulation.
Important! If using an extension lead, follow the instructions that came with your lead regarding maximum load while cable is wound. If in doubt, ensure that the entire cable is unwound. Using a coiled extension lead will generate heat which could melt the lead and cause a fire.
UNPACKING AND CHECKING
PACKAGING
Carefully remove the product from the packaging and examine it for any sign of
damage. Check contents against the parts shown in Fig A. If any part is
damaged or missing, please contact the Draper Help Line (see back page). Do
not attempt to use the product!
The packaging material should be retained during the warranty period, in case
the product needs to be returned for repair.
warning!
- Some of the packaging materials may be harmful to children. Do not leave any of these materials in reach of children.
- If any of the packaging is to be thrown away, make sure it is disposed of correctly, according to local regulations.
IDENTIFICATION – FIG.A
- On/off switch
- Soft grip
- Plug and cable
- Dust collection
- Hook & loop pad
- 3xsanding sheets (60G, BOG, 120G)
FIG.A
Note: For details of our full range of accessories and consumables, please visit drapertools.com
BASIC SANDER OPERATIONS
Note: Remove the plug from the socket before carrying out adjustment, servicing or maintenance.
SWITCHING ON/OFF – FIG. 1
Ensure the sander is raised off the workpiece.
To start the sander place the switch 1 to the “I” position. To stop the sander
place the switch into the “O” position.
This machine is intended for light/medium duty sanding of wood and similar
materials only.
Apply equal pressure on the workpiece with the base pad remaining flat. Attempting to sand areas using only the edge will lead to damage to the base pad.
Note: Excess pressure when sanding reduces the effectiveness of tool and will cause the motor to overload.
Do not overload this machine.
Abrasive sheets are consumable items.
Replace abrasive sheets when clogged with material or when surface/edge has
rips, cracks or worn areas.
FIG. 1
ABRASIVE SHEET INSTALLATION/ REPLACEMENT – FIG. 2
The sanding sheets are simply pressed onto the base pad. The holes in the
sander must correspond to the holes in the sanding sheet for maximum dust
extraction.
ABRASIVE PAPER
Only use good quality abrasive paper as this will improve the sanding
efficiency and reduce working time.
Use coarse grade (60, or 80) sanding sheets when large quantities of material
need to be removed.
For finishing operations use 120 grade sanding sheets.
Note: Abrasive sheets and the sander base pad are consumable items.
Note: Remove the plug from the socket before carrying out adjustment, servicing or maintenance.
DUST
Inhalation of dust particles can be detrimental to health. The dust outlet can
be connected to a dust extraction machine.
The dust extraction box can be used instead when connection to a dust
extractor is not practical to reduce amount of air borne dust.
The dust box is attached by simply pushing it onto the outlet port until the
sides of the box meet the body of the sander.
REMOVING AND EMPTYING THE DUST COLLECTION BOX
- Disconnect the plug from the electricity supply.
- Hold your sander vertically with the dust collector G) at the bottom.
- Pull the box gently holding the grips on the side of the dust collection box.
- Remove the top of the dust collection box and empty.
A click is heard when the dust box is correctly fitted.
Do not wash the dust box/filter.
Empty the dust collection box/filter at regular intervals.
MAINTENANCE
Regular inspection and cleaning reduces the necessity for maintenance
operations and will keep your tool in good working condition.
The motor must be correctly ventilated during tool operation. Avoid blocking
the air inlets and vacuum the ventilation slots regularly.
Do not use solvents or fuels to clean the product. When not in use, store the
product in a safe, dry place.
WARRANTY
Draper tools have been carefully tested and inspected before shipment and are guaranteed to be free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor or contact:
- UK: Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF. England.
- EU: Oude Graff 8, 6002 NL Weet (NL).
- Telephone Sales Desk: +44 (0)23 8049 4333 or:
- Product Helpline +44 (0)23 8049 4344.
A proof of purchase must be provided.
If upon inspection it is found that the fault occurring is due to defective
materials or workmanship, repairs will be carried out free of charge. This
warranty period covering parts labor is 24 months from the date of purchase
except where tools are hired out when the warranty period is 90 days from the
date of purchase.
This warranty does not apply to any consumable parts, any type of battery or normal wear and tear, nor does it cover any damage caused by misuse, careless or unsafe handling, alterations, accidents, or repairs attempted or made by any personnel other than the authorized Draper warranty repair agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will be quoted and made accordingly. This warranty applies in lieu of any other warranty expressed or implied and variations of its terms are not authorized.
Your Draper warranty is not effective unless you can produce upon request a
dated receipt or invoice to verify your proof of purchase within the warranty
period. Please note that this warranty is an additional benefit and does not
affect your statutory rights.
Draper Tools Limited.
DISPOSAL
- At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations.
- Contact your local authority for details of collection schemes in your area.
In all circumstances:
- Do not dispose of power tools with domestic waste.
- Do not incinerate.
- Do not dispose of WEEE’ as unsorted municipal waste.
Waste Electrical & Electronic Equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>