BOSCH GTA 600 Professional Saw Stand User Manual

: June 14, 2024
: Bosch

Table of Contents

BOSCH GTA 600 Professional Saw Stand
Product Information
FAQ (Frequently Asked Questions)
WHAT’S INCLUDE
Safety Instructions
Product description and specifications
Assembly
Operation
Maintenance and Service
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BOSCH GTA 600 Professional Saw Stand

Product Information

Specifications

Brand: Bosch
Model: GTA 600 Professional
Article Number: 3 601 M22 0..
Maximum Load Bearing Capacity: 60 kg (power tool + workpiece)

Product Description
The Bosch GTA 600 Professional is a saw stand designed to securely mount power tools for safe and steady machining of workpieces. It features a swing latch, clip, base frame, saw stand leg, fastening set, housing frame of the power tool, and fixing clip on the power tool.

Product Features

Swing latch (1): Used for securing the power tool to the saw stand.
Clip (2): Helps in securely fastening components.
Base frame (3): Provides stability and support to the saw stand.
Saw stand leg (4): Supports the weight of the saw stand and power tool.
Fastening set (5): Includes screws and connecting pieces to ensure stability during work.
Housing frame of the power tool (6): Allows for easy mounting of the power tool onto the saw stand.
Fixing clip on the power tool (7): Secures the power tool to prevent unintentional movement.

Safety Instructions

General Safety Instructions
Prior to using the saw stand or mounting a power tool on it, it is essential to read and follow all warnings and instructions provided. Failure to do so may result in electric shock, fire, and serious injury.

Safety Instructions for Saw Stands

Disconnect the plug from the power source and/or remove the battery from the power tool before making any adjustments or changing accessories. This prevents accidental startup of the power tool.
Properly assemble the saw stand before mounting the power tool to ensure stability and prevent collapsing.
Firmly secure the power tool to the saw stand before use to avoid loss of control due to slipping.
Place the saw stand on a firm, flat, and horizontal surface to ensure safe and steady machining of the workpiece.
Avoid overloading the saw stand or climbing/standing on it, as it can raise the center of gravity and cause tipping over.
Do not force the workpiece into the saw blade, as excessive pressure can lead to instability and tipping of the saw stand.
Ensure all screws and connecting pieces are tightly fastened during work to maintain stability and accuracy.
Prevent unbalancing of the saw stand by supporting the free end of long and heavy workpieces.
Avoid placing fingers near points of articulation when pushing together or pulling apart the saw stand to prevent crushing injuries.

Symbols
The following symbols are important for understanding the use of your saw stand:

Maximum Load Bearing Capacity: Indicates the maximum weight (power tool + workpiece) that the saw stand can safely handle (60 kg).

FAQ (Frequently Asked Questions)

What is the maximum load capacity of the Bosch GTA 600 Professional saw stand?
The maximum load capacity of the Bosch GTA 600 Professional saw stand is 60 kg, which includes the weight of the power tool and the workpiece.
Can I use the saw stand on an uneven surface?
No, it is recommended to place the saw stand on a firm, flat, and horizontal surface to ensure safe and accurate machining of the workpiece.
How should I secure the power tool to the saw stand?
You should firmly secure the power tool to the saw stand using the swing latch and fixing clip provided. This prevents unintentional movement and ensures control during operation.
Is it safe to overload the saw stand?
No, overloading the saw stand can raise its center of gravity and cause it to tip over. It is important to adhere to the maximum load-bearing capacity specified (60 kg) and avoid excessive weight.
Can I force the workpiece into the saw blade?
No, forcing the workpiece into the saw blade with excessive pressure can lead to instability and tipping of the saw stand. Allow the power tool to cut through the workpiece smoothly without applying excessive force.

WHAT’S INCLUDE

$BOSCH-GTA-600-Professional-Saw-Stand- $2$$

Safety Instructions

General Safety Instructions
Read all the warnings and instructions included with the saw stand or the power tool you intend to mount on it. Failure to observe the safety and general instructions may result in electric shock, fire and/or serious injury.

Safety Instructions for Saw Stands

Disconnect the plug from the power source and/or remove the battery from the power tool before making any adjustments to the power tool or changing accessories. Accidents can occur when power tools are started unintentionally.
Assemble the saw stand properly before mounting the power tool. Correct assembly is important to prevent the risk of collapsing.
Firmly secure the power tool to the saw stand before using it. You may lose control of the power tool if it slips on the saw stand.
Place the saw stand on a firm, flat, horizontal surface. If there is a chance that the saw stand will slip or wobble, the safe and steady machining of the workpiece cannot be guaranteed.
Do not overload the saw stand or climb or stand on it. Overloading or standing on the saw stand can raise its centre of gravity, causing it to tip over.
Do not force the workpiece into the saw blade. Exerting excessive pressure on the power tool can cause the saw stand to tip over.
Ensure that all screws and connecting pieces are tightly fastened when carrying out work. Loose connections can cause instability and inaccurate sawing.
Ensure that long and heavy workpieces do not unbalance the saw stand. The free end of long and heavy workpieces must have something placed underneath it or be supported.
When pushing together or pulling apart the saw stand, do not put your fingers near the points of articulation. There is a risk of fingers being crushed.

Symbols
The following symbols may provide you with important information about the use of your saw stand. Please take note of these symbols and their meaning. Knowing what these symbols mean will help you to use your saw stand more effectively and more safely.

Product description and specifications

Intended Use
The saw stand is intended for holding the following Bosch benchtop saws (stand 2023.07):

GTS 10 J ( 3 601 M30 5.. )

The saw stand and power tool are intended for cutting boards and profiles.

Product Features
The numbering of the components shown refers to the illustrations on the graphics pages at the beginning of the manual. $BOSCH-GTA-600-Professional- Saw-Stand- $1$$

Swing latch
Clip
Base frame
Saw stand leg
Fastening set
Housing frame of the power tool
Fixing clip on the power tool

Technical Data

Values can vary depending upon the product and are subject to application and environmental conditions. For further information www.bosch- professional.com/wac.

Assembly

Items included
Check to ensure that all the parts listed below have been supplied before assembling the saw stand:

Base frame (3)
Saw stand legs (4) (4 pieces)
Fastening set (5) consisting of: Cross-head screws M8 x 45 (4 pieces), lock nuts M8 (4 pieces)

Extra tools required (not included in the delivery):

Cross-headed screwdriver
Open-end spanner (13 mm)

Assembling the saw stand (see figures A1−A2) $BOSCH-GTA-600-Professional- Saw-Stand- $3$$ $BOSCH-GTA-600-Professional-Saw-Stand- $4$$

Carefully remove all parts included in the delivery from their packaging.
Remove all packing material.
Open the swing latch (1) and extend the base frame (3).
Insert the saw stand legs (4) into the square pipes in the base frame (3) until they are aligned with the assembly holes. The saw stand legs must point outwards here.
Screw together the saw stand legs and the base frame using the nuts and bolts in the fastening set (5).

Securing the power tool (see figures B1–B3) $BOSCH-GTA-600-Professional- Saw-Stand- $7$$

Fold up both clips (2).
Push the rear housing frame (6) of the power tool so it lies entirely beneath the clips (2).
Centre the power tool on the base frame (3).
Hook the bracket of the swing latch (1) over the fixing clip (7) and fold down the lever of the swing latch to secure the power tool.

Operation

Working Advice
Always hold the workpiece firmly in place, especially long, heavy pieces. Once the workpiece has been cut, the centre of gravity may be displaced, causing the saw stand to tip over. Do not overload the saw stand. Always observe the maximum load bearing capacity of the saw stand.

Transport (see figures C1–C3) $BOSCH-GTA-600-Professional-Saw-Stand- $8$$

The power tool must not be mounted on the saw stand when the saw stand is being folded up or unfolded.
You can fold up the saw stand for transporting.
- Remove the power tool.
- Fold down both clips (2).
- Fold up the saw stand.
- Hook the bracket of the swing latch (1) over the other side of the base frame (3) and push down the lever of the swing latch to secure the power tool.

Maintenance and Service

After-Sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. You can find explosion drawings and information on spare parts at: www.bosch-pt.com The Bosch product use advice team will be happy to help you with any questions about our products and their accessories. In all correspondence and spare parts orders, please always include the 10‑digit article number given on the nameplate of the product.

Malaysia
Robert Bosch Sdn. Bhd.(220975-V) PT/SMY
No. 8A, Jalan 13/6
46200 Petaling Jaya
Selangor
Tel.: (03) 79663194
Toll-Free: 1800 880188
Fax: (03) 79583838
E-Mail: kiathoe.chong@my.bosch.com
www.bosch-pt.com.my
You can find further service addresses at: www.bosch- pt.com/serviceaddresses
Disposal
Saw stands, accessories and packaging should be recycled in an environmentally responsible manner.