MARATHON USB Clock with Two Front Fast Charging Ports User Manual

: June 9, 2024
: MARATHON

Table of Contents

OVERVIEW
FEATURES
GETTING STARTED
TIME AND ALARM SETTING
Documents / Resources

USB CLOCK WITH TWO FRONT FAST

OVERVIEW

Part A: LED
A1: Snooze
A2: Time Display
A3: Date, Day of Week
A4: Alarm 2
A5: Alarm Time 2
A6: Alarm 1
A7: Alarm Time 1

Part B: Buttons
B1: + Button
B2: – Button
B3: Button
B4: MODE/SET Button
B5: ALARM SET Button
B6: RESET Button
B7: Alarm Sound Slide Switch
B8: ON/OFF Slide Switch
B9: ON/OFF Slide Switch

Part C: Physical features
C1: USB Port 1
C2: USB Port 2
C3: Battery Compartment
C4: Stand
C5: Adapter Jack

FEATURES

Two USB ports: Max. 3A output for both ports combined
12 or 24-hour format time display
Dual daily alarm function
Perpetual Calendar Up to Year 2099
Displays the day of the week in one of 3 languages: English, French or Spanish

GETTING STARTED

Remove the tag from the battery compartment (C3) to activate the already installed backup battery. Connect the USB cable to the wall adapter and the other end to the adapter jack (C5). Plug the adapter into a wall outlet to power up the clock.
NOTE: Backup battery will only keep current time setting in memory. It will not power up or operate the clock.
Place the unit on a flat surface and use the stand (C4) to adjust the viewing angle.

TIME AND ALARM SETTING

Manual Time Setting

To enter the Clock/Calendar setting mode, press and hold MODE/SET button (B4) for 2 seconds.
To adjust the setting, press + (B1) or – (B2) button until desired value is reached.
Press MODE/SET button (B4) to confirm and continue to the next setting.
NOTE: The setting order is as follows: 12/24 Hour Format > Hour > Minute

Display Language > Year > Month/Date display order > Month > Date
To view the year and alarm time while in the default time display mode, press MODE/SET button (B4).
Dual Daily Alarm Function
Press ALARM SET button (B5) and the time of alarm 1 will flash, then press + (B1) or – (B2) button to adjust the alarm time. Press ALARM SET button (B5) to confirm the new alarm time and continue to alarm 2 setting. Press + (B1) or – (B2) button to adjust the time for alarm 2, then press the ALARM SET button (B5) to confirm the new alarm 2 time and exit the alarm setting mode. Press and hold + (B1) or – (B2) button to speed up the rate at which the value changes.
To activate the alarm, move either or both switches found on the right side of the clock ( ON/OFF (B8) or ON/OFF (B9)) upwards. When either alarm is turned on, an alarm (A4 or A6) becomes visible on the display.
NOTE: You can have one or both alarms active at the same time.
When the alarm sounds, it will alert for two minutes before stopping automatically. The (A4 or A6) will flash continually while the alarm is sounding off. This clock comes with an “Accumulative” alarm sound. The alarm will automatically increase its
beeping frequency until alarm is stopped or reaches 2 minutes.
To snooze the alarm, press the button (B3) when alarm sounds. The alarm will go silent for 5 minutes, after which point it will sound again. While the alarm is in silent mode, an icon (A1) will flash on the display indicating the alarm has been placed into snooze mode. This process can be repeated up to seven times after which the alarm will no longer sound. To cancel the snooze and turn off the alarm, follow instructions below.
To stop the alarm, press any button on the top of the clock except the button (B3); The alarm will now recur the next day at the same time.
To turn off the recurring alarm indefinitely, slide the respective or ON/OFF switch (B8 or B9) to the OFF position.
To adjust the volume of the alarm, slide the ALARM SOUND switch (B7) to the desired sound level. There are three options available: LOW is the quietest volume level, MED is the middle volume level, and HIGH is the loudest volume level.

USING DIMMER
Press the button (B3) to adjust the LED brightness of the display. You can choose between low brightness, high brightness and completely turning off the display brightness.
RESETTING THE CLOCK
To reset the clock back to factory default, press the RESET button (B6) using a sharp object such as a pin. The screen will flash on and off for 2 seconds followed by a short beep. This confirms the clock settings have been reset to default factory settings.
USB PORTS

If only one USB port is used for charging a device, the maximum current output is 2A.
If both USB ports are used for charging multiple devices at the same time, the maximum combined current output is 3A.
NOTE:
o Do not charge multiple devices from the same USB port.
o Only charge devices that are self-regulated.
o When only one USB port is used, the device will charge faster. When both USB ports are used at the same time, the device charging time may increase.

IMPORTANT

Do not expose the unit to extreme temperatures, water, or severe shock.
Avoid cleaning the unit with any corrosive materials, such as perfume, alcohol, or cleaning agents.
Always clean the unit with a damp cloth. Never spray any cleaning agents onto the unit directly.
NOTE: You must unplug your clock from the electrical outlet before cleaning to avoid the risk of shock or damage.

Our Products contain high quality components and are designed to facilitate recycling. Our products or product packaging are marked with the symbol below. The symbol indicates that the product must not be treated as municipal waste. It must be disposed of separately via the appropriate return and collection systems available. By following these instructions you ensure that this product is treated correctly and help to reduce potential impacts on the environment and human health, which could otherwise result from inappropriate handling. Recycling of products helps to conserve natural resources and protect the environment. For more detailed information on collection and recycling systems for this product, please contact the shop where you purchased it, your local dealer or sales / service representatives.

Marathon Watch Company Ltd.
Customer Service:
www.MarathonWatch.com
Designed in Canada
Made in China
2 year warranty VER 1.3

Documents / Resources

| MARATHON USB Clock with Two Front Fast Charging Ports [pdf] User Manual
CL030072, CL030072 USB Clock with Two Front Fast Charging Ports, USB Clock with Two Front Fast Charging Ports, Clock with Two Front Fast Charging Ports, Two Front Fast Charging Ports
---|---