WISENET PRN-1610B2 Network Video Recorder User Guide

WISENET PRN-1610B2 Network Video Recorder

Package Contents

• The appearance of the components may differ from the image shown.
• Accessory category and quantity may differ depending on sales region.
• For some regions, HDD is not pre-installed. HDD Fixing Screw, SATA Cable quantity vary depending on the model.

Hanwha Techwin Co., Ltd. is a surveillance camera manufacturer that provides video information equipment with various functions. Users must comply with local laws when using our devices. Users are solely responsible for any illegal use of our products.

Model without a HDD

Model name

Parts

| ****

PRN-6410DB4

| PRN-6410B4 PRN-3210B4| PRN-3210B2 PRN-1610B2
---|---|---|---
Recorder| O| O| O
Mouse| O| O| O
Quick Guide| O| O| O
Power Cable| O (2 ea)| O| O
Terminal block| O (2 ea)| O (2 ea)| O (2 ea)
Bracket Rack| X| X| O
HDD Fixing Screw| O (64 ea)| O (64 ea)| O (32 ea)
Bracket Fixing Screw| X| X| O (8 ea)
Grounding screw| X| X| O
HDD Number Sticker 1| X| X| O
HDD Number Sticker 2| O| O| X
Front Cover Lock Key| O| O| O
Anti-slip Rubber Pad| O| O| X

CAUTION

• RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

• Do not ingest battery, Chemical Burn Hazard.

• This product contains a coin / button cell battery. If the coin / button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can
  lead to death.

• Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part or the body, seek immediate medical attention.

Installing the HDD

• If you are adding a new or previously used HDD to this product in addition to the HDD(s) originally installed, format the new HDD manually in the set before use.
• If you wish to replace or add an HDD, contact your dealer or our customer service first.

PRN-6410DB4/PRN-6410B4/PRN-3210B4

1. Use the front cover lock key to unlock the cover. Grab the front cover with both hands and pull it to the left to remove it.
2. Press the orange button on the hard disk bracket to the left and pull forward to separate the main body and the hard disk bracket.
3. Mount a HDD in the HDD bracket and screw it in using the screws provided.
4. Once the HDD is mounted in the bracket, push the bracket into the main body and close the front cover.
   • Fit the front cover into the right notch of the main body, then press and close until you hear a ‘click’.
   • Use the front cover lock key to lock the front cover so that it does not get separated.

PRN-3210B2/PRN-1610B2

1. Use the lock key on the front cover to unlock it, and press and pull the left notch of the front cover to separate it.
2. Press the orange button on the hard disk bracket  to the left and pull forward to separate the main body and the hard disk bracket.
3. Mount a HDD in the HDD bracket and screw it in using the screws provided.
4. Once the HDD is mounted in the bracket, push the bracket into the main body and close the front  cover.
   • Fit the front cover into the bottom notch on the recorder, and then press and close until you hear a ‘click’.
   • Use the front cover lock key to lock the front cover so that it does not get separated.

Installing the Rack

• PRN-6410DB4/PRN-6410B4/PRN-3210B4

Rack Installation Requirements and Reference Dimensions

Dimensions of mounting flange

Notable dimensions

• Flange mounting holes (square holes are recommended for PRN-6410 series)
  While EIA-310-D standard allows the mounting flange holes to be round, square, or tapped (threaded), the PRN-6410 series is only designed to work with round or square holes, but not tapped holes.

Square mounting holes

Recommended rack dimensions

Precautions when Selecting Shelves
To prevent any problem while installing the recorder, make sure to select a structure where the bottom of the product is mounted.

For installation stability, fixed shelf dedicated to 19-inch rack that supports the load of at least 30 kg is recommended.

• A shelf needs to be secured with at least 4 screws.

Precautions when Using Sliding Shelves

• When removing a shelf, fix the rack to the ground so that it does not get toppled.
• Avoid leaning on the installed product or place an object on it while its shelf is pulled out.
• When sliding in/out the shelf, be careful not to drop the product.
• Use a shelf that supports the load of at least 30 kg while it is pulled out, and ensure that there is no deformation on the rail part while in use.

How to Install Rack

1. Mount the fixed or sliding shelf onto the 19-inch rack.
   • See the manual provided by the manufacturer for installing the fixed shelf.
2. Place the recorder on the shelf and push it until the left/right fixing holes of the recorder align with the mounting flange holes of the 19-inch rack.
3. Insert the screws in the left/right fixing holes of the recorder to secure the recorder.
   • Fixing nuts and cage nuts for the recorder are not shipped with the product. They are separately sold at the place where you purchased the shelf or rack. (M6 nuts and cage nuts of head size equal to 12 mm or less are recommended.)

Using Product Information

You can check the product information/manual/firmware information/FAQ/HDD compatibility list on the homepage or mobile web of your smartphone.

Connecting

Connecting to a Network Using a Router

• If you want to add 1-3 PCs and recorders in an environment using xDSL/Cable modem, you can use the router with only one Internet line.
• This guide is an installation guide for network beginners. Follow the instructions to set up your router, local PC, and recorder.

Connecting the cable

Connecting a router with PC

• Refer to the router’s user manual.

Connecting a recorder and a router

Move to <IP & Port> of the Recorder Setting menu, and set the <IP address> and in .

• The checked in the [cmd.exe] window of the local PC and the of the recorder must be the same.
• The first three numbers of the recorder should match the first three of the checked in the [cmd.exe] window of the local PC.

Important: Please check ‘Manuals’ from our website, before connecting to the Supply, https://www.hanwha-security.com/en/data-center/download-data/

Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
The Eco mark represents Hanwha Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive.

Disposal

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.  To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

References

• Hanwha Vision - Global Vision Solution Provider
• 한화비전 - 글로벌 비전 솔루션 프로바이더

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>