Hunan LY06 Wireless Binaural Stereo Music Headphones Instruction Manual

Table of Contents

Function Introduction:
- Power On: Take out the headphones from the charging bin to automatically turn on and pair. Alternatively, press the multi-function key for 3 seconds to power on.
- Power Off: Remove the earphones to automatically power off or long press for 5 seconds to turn off.
- Pairing: Place the headphones in the charging case for automatic shutdown or press for 5 seconds to enter pairing mode.
- Play/Pause: Click any headset to play or pause music.
- Answer/Hang Up Calls: Click any headset to answer or hang up calls. Press for 2 seconds to reject calls.
- Skip Tracks: Double-click on the ear to skip to the next or previous track.
- Volume Control: Three clicks to the main ear to increase volume, and three clicks on the ear to decrease volume.
- Voice Assistant: Press any headset for 3 seconds to activate the voice assistant.
- Auto-reconnect: The device will automatically reconnect if previously paired.

If the product has any functional issues, how can I avail of warranty service?

You can contact customer service to enjoy warranty service.

What damages are not covered under warranty?

Artificial damage, breakage, scratches, water damage, and lack of warranty cards are not covered.

What information is required for warranty claims?

The customer must provide all necessary information like name, address, telephone number, and purchase date.

What is the indication of full charge during headphone charging?

The indicator light will turn off when the headset is fully charged.

Can the device be used in RF exposure conditions?

Yes, the device meets general RF exposure requirements and can be used in portable exposure conditions without restrictions.

True wireless connectivity (TWS) to achieve wireless stereo, left and right channel separation, HIFI audio, left and right ears have a full bluetooth function, can be used alone or in pairs
Note: the product parameters will be different according to the machine type, usage mode, environment, and so on.
- Support Agreement: A2DP1.3/HIFI1.6/HFP1.6/AVRCP1 .6/HSP1.2
- Transmission distance: 8M
- Frequency: 2.4G
- Power reading: YES
- Headphone charging time 1.5H
- Charging Time: 1.5H

When the headset is charged, the indicator light is always bright, and when the headset is full, the indicator light turns off
The charging indicator lights flash when the charging bin is charged, and it always lights when it is full.
This product built-in non-removable rechargeable battery, and a charging mode for external wire charging.
Charging current 1A voltage 5V, can not use more than 5V1A charger to charge the product.
It takes about 1.5 hours for the Bluetooth headset/charging dock to be fully charged.
When the power of the Bluetooth headset is too low, the headset will send out an alert sound to remind the user to charge it at regular intervals.

Power on-take Out the headphones from the charging bin. The headphones will automatically turn on and pair. You can also press the multi-function key of the headphones for 3 seconds to hear the“Power on” sound.
Power off-Take out the earphones, and earphone automatic boot pair, and long press the earphone for 5 seconds to hear the “Power off” sound.
Pair-Put the headphones into the charging automatic shutdown, you can also press the headphones 5 seconds to hear the “connected” sound
Play pause-click any headset
Listen to the phone any headset
Hang up-click any headset during a call
Reject calls-press any headset for 2 seconds
Last song-double click on the ear
Next track-double click on the main ear.
Increase volume-three clicks on the main ear
Volume reduction clicks to the ear pair
Voice assistant-press any headset for 3 seconds
Auto-reconnect-just turn it on, there must be a matching record before