vetus OBC115A Hydraulic Steering Cylinder User Manual

June 9, 2024
vetus

vetus OBC115A Hydraulic Steering Cylinder

vetus-OBC115A-Hydraulic-Steering-Cylinder-product

Safety

Warning indications
The following warning indications are used in this manual in the context of safety:

DANGER
Indicates that great potential danger exists that can lead to serious injury or death.

WARNING
Indicates that a potential danger that can lead to injury exists.

CAUTION
Indicates that the usage procedures, actions etc. concerned can result in serious damage to or destruction of the engine. Some CAUTION indications also advise that a potential danger exists that can lead to serious injury or death.

NOTE
Emphasises important procedures, circumstances etc.

Symbols

Indicates that the relevant procedure must be carried out.

Indicates that a particular action is forbidden.

Share these safety instructions with all users.
General rules and laws concerning safety and accident prevention must always be observed.

Introduction

This manual provides guidelines for the use of the OBC115A, OBC175A and OBC250A hydraulic steering cylinder for outboard engines.
A hydraulic steering system for outboard engines consists of the following basic components:

  • Steering cylinder
  • Steering pump
  • Hoses
  • Steering wheel

WARNING
Unauthorised modifications exclude the factory’s liability for any resulting damage.

Operation

Turn the steering wheel (gently) in the desired direction. If necessary, practice sailing forwards and backwards in a safe location.

Maintenance

The outside of the hydraulic steering system must be cleaned after every use. It is very important to clean the steering system, as it is considered a part of your safety equipment. Use water and (mild) soap for washing.
Check the following points regularly:

  • Steering pump oil level.
  • Steering response when turning the steering wheel.
  • Steering hoses and connections (damage, wear and leaks).
  • Condition of all fasteners.
  • Signs of corrosion.
  • Condition of hydraulic oil (flush if necessary).
  • Damage/corrosion of the piston rod. Grease if necessary.

WARNING
Have maintenance and repairs carried out by a competent company.

FOKKERSTRAAT 571 – 3125 BD SCHIEDAM – HOLLAND
TEL.: +31 (0)88 4884700 – sales@vetus.comwww.vetus.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals