BARCO K9601793 Nio 2MP LED Display User Guide
- June 9, 2024
- BARCO
Table of Contents
K9601793 Nio 2MP LED Display
error
{
“error”: {
“message”: “You exceeded your current quota, please check your plan and
billing details.”,
“type”: “insufficient_quota”,
“param”: null,
“code”: null
}
}
the following is the text from the user manual / instructions:
Nio 2MP LED Display
ENABLING BRIGHT OUTCOMES
User Guide
MDNC-2221
Barco NV Beneluxpark 21, 8500 Kortrijk, Belgium www.barco.com/en/support
www.barco.com
Registered office: Barco NV President Kennedypark 35, 8500 Kortrijk, Belgium
www.barco.com/en/support www.barco.com
Table of contents
1 Welcome!………………………………………………………………………………………………………………………………………………………………………………….
5
1.1 What’s in the box
…………………………………………………………………………………………………………………………………………………………..6 1.2 At a glance
………………………………………………………………………………………………………………………………………………………………………6
2 Installation
………………………………………………………………………………………………………………………………………………………………………………. 9
3 Daily operation
…………………………………………………………………………………………………………………………………………………………………..17
4 Advanced
operation……………………………………………………………………………………………………………………………………………………….21
K5903058 /11 Nio 2MP LED Display
3
5
Maintenance………………………………………………………………………………………………………………………………………………………………………..29
5.1 Scheduled maintenance
………………………………………………………………………………………………………………………………………….30 5.2 Cleaning
instructions…………………………………………………………………………………………………………………………………………………30
6 Important
information…………………………………………………………………………………………………………………………………………………….33
7 Troubleshooting
………………………………………………………………………………………………………………………………………………………………..51
7.1 Troubleshooting
………………………………………………………………………………………………………………………………………………………….52 7.2 Warning
signals…………………………………………………………………………………………………………………………………………………………..52
4
K5903058 /11 Nio 2MP LED Display
Welcome!
1
K5903058 /11 Nio 2MP LED Display
5
Welcome!
1.1 What’s in the box
Overview
Keep your original packaging. It is designed for this display and is the ideal
protection during transport and storage.
Nio 2MP LED Display
ENABLING BRIGHT OUTCOMES
User Guide
MDNC-2221
Barco NV Beneluxpark 21, 8500 Kortrijk, Belgium www.barco.com/en/support
www.barco.com
Registered office: Barco NV President Kennedypark 35, 8500 Kortrijk, Belgium
www.barco.com/en/support www.barco.com
Table of contents
1 Welcome!………………………………………………………………………………………………………………………………………………………………………………….
5
1.1 What’s in the box
…………………………………………………………………………………………………………………………………………………………..6 1.2 At a glance
………………………………………………………………………………………………………………………………………………………………………6
2 Installation
………………………………………………………………………………………………………………………………………………………………………………. 9
2.1 Display controller
installation………………………………………………………………………………………………………………………………….10 2.2 Display
position adjustment ……………………………………………………………………………………………………………………………………10 2.3
Cable connections…………………………………………………………………………………………………………………………………………………….. 11
2.4 MXRT driver and Intuitive Workflow Tools installation
…………………………………………………………………………………..13 2.5 QAWeb registration
…………………………………………………………………………………………………………………………………………………..14 2.6 VESA-mount
installation ………………………………………………………………………………………………………………………………………….14
3 Daily operation
…………………………………………………………………………………………………………………………………………………………………..17
3.1 Recommendations for daily operation
………………………………………………………………………………………………………………..18 3.2 Key indicator lights
…………………………………………………………………………………………………………………………………………………….18 3.3 Standby
switching………………………………………………………………………………………………………………………………………………………19 3.4 OSD
menu access …………………………………………………………………………………………………………………………………………………….19 3.5
OSD menu navigation ………………………………………………………………………………………………………………………………………………19
4 Advanced
operation……………………………………………………………………………………………………………………………………………………….21
4.1 OSD menu language
………………………………………………………………………………………………………………………………………………..22 4.2 OSD menu
automatic close function……………………………………………………………………………………………………………………22 4.3
Power status LED ………………………………………………………………………………………………………………………………………………………22
4.4 Key indicator lights
…………………………………………………………………………………………………………………………………………………….22 4.5 Power lock
function……………………………………………………………………………………………………………………………………………………23 4.6 DPMS
mode…………………………………………………………………………………………………………………………………………………………………23 4.7
Hibernate ………………………………………………………………………………………………………………………………………………………………………23
4.8 Luminance target
……………………………………………………………………………………………………………………………………………………….24 4.9 Viewing modes
……………………………………………………………………………………………………………………………………………………………24 4.10 Display
functions ………………………………………………………………………………………………………………………………………………………..24 4.11
Reading rooms ……………………………………………………………………………………………………………………………………………………………25
4.12 Display
orientation……………………………………………………………………………………………………………………………………………………..26 4.13
Video input signals
…………………………………………………………………………………………………………………………………………………….26 4.14 EDID
timings………………………………………………………………………………………………………………………………………………………………..26 4.15
Display info …………………………………………………………………………………………………………………………………………………………………..27
4.16 Display
status………………………………………………………………………………………………………………………………………………………………27
K5903058 /11 Nio 2MP LED Display
3
5
Maintenance………………………………………………………………………………………………………………………………………………………………………..29
5.1 Scheduled maintenance
………………………………………………………………………………………………………………………………………….30 5.2 Cleaning
instructions…………………………………………………………………………………………………………………………………………………30
6 Important
information…………………………………………………………………………………………………………………………………………………….33
6.1 Safety
information………………………………………………………………………………………………………………………………………………………34 6.2
Cybersecurity ………………………………………………………………………………………………………………………………………………………………36
6.3 Environmental
information………………………………………………………………………………………………………………………………………36 6.4
Regulatory compliance information
……………………………………………………………………………………………………………………..39 6.5 EMC notice
…………………………………………………………………………………………………………………………………………………………………..40 6.6
Explanation of symbols…………………………………………………………………………………………………………………………………………….42
6.7 Legal
disclaimer………………………………………………………………………………………………………………………………………………………….46 6.8
Technical
specifications……………………………………………………………………………………………………………………………………………46 6.9 Open
source license information ………………………………………………………………………………………………………………………….49
7 Troubleshooting
………………………………………………………………………………………………………………………………………………………………..51
7.1 Troubleshooting
………………………………………………………………………………………………………………………………………………………….52 7.2 Warning
signals…………………………………………………………………………………………………………………………………………………………..52
4
K5903058 /11 Nio 2MP LED Display
Welcome!
1
K5903058 /11 Nio 2MP LED Display
5
Welcome!
1.1 What’s in the box
Overview
· MDNC-2221 display · User guide · System sheet · Documentation disc ·
DisplayPort cable · DVI cable · USB cable · Mains cable(s) · External power
supply If you ordered a Barco display controller, it’s also in the box
together with its accessories. A dedicated user guide is available on the
documentation disc.
Keep your original packaging. It is designed for this display and is the ideal
protection during transport and storage.
1.2 At a glance
Front
7
8
Image 11
1
23456
1. USB-A 2.0 downstream connector 2. Left key 3. Right key 4. Menu key 5.
Standby key 6. Power status LED
– Off: Display not powered, or display operational but power LED function
disabled in OSD (see “Power status LED”, page 22)
– Steady green: Display operational
6
K5903058 /11 Nio 2MP LED Display
Welcome!
– Steady amber: Display switched off via the standby key, or display in
hibernate mode (requires DPMS mode and Hibernate to be enabled in the OSD
menu, see “DPMS mode”, page 23 and “Hibernate”, page 23)
7. Ambient light sensor 8. Front sensor
Back
6
7 8
9
10
1
23
4
5
Image 12
1. +24 VDC power input 2. USB-A 2.0 downstream connector 3. USB-B 2.0 upstream connector 4. DVI video input 5. DisplayPort video input 6. Connector compartment cover 7. Kensington security lock 8. VESA mount cover plate 9. Cable duct 10. Foot lock clip
K5903058 /11 Nio 2MP LED Display
7
Welcome!
8
K5903058 /11 Nio 2MP LED Display
Installation
2
K5903058 /11 Nio 2MP LED Display
9
Installation
2.1 Display controller installation
About
Before you install your display and connect it with the workstation, make sure
to have a suitable1 display controller installed in the workstation.
The Nio 2MP LED Display display operates at its full specifications when
driven by a Barco MXRT display controller and MXRT driver (which also includes
the Barco Intuitive Workflow Tools). If you ordered a MXRT display controller,
it is included in the box of your display. For more information and
installation instructions, please check the Barco “Display Controller and
Intuitive Workflow Tools” user guide on the included documentation CD, or at
www.barco.com/support.
2.2 Display position adjustment
To adjust the display position
1. Pull out the red foot lock clip from the hole at the back of the foot.
Image 21
2. You can now safely tilt, swivel, pivot, raise and lower the display as
desired.
1. For a list of compatible display controllers, please refer to the compatibility matrix available on my.barco.com (MyBarco > My Support > Healthcare > Compatibility Matrices > Barco Systems Compatibility Matrices)
10
K5903058 /11 Nio 2MP LED Display
Installation
Image 22
WARNING: The display must be in its highest position before it can be properly
pivoted. Store the foot lock clip in the storage hole in case the display
needs to be transported later.
Image 23
If, after installing the display of the system, you change the panel
orientation while an image is on the screen, the result depends on the graphic
board and the resolution of the image. In some cases the image will be rotated
automatically, in other cases it will not be rotated (e.g., when pixels would
be lost after rotation). If necessary, change the image resolution in the
display control panel and restart the system after changing the orientation.
2.3 Cable connections
To connect the cables
1. Open the connector compartment. Do this by gently pushing the two lips on
top of the cover, after which it can be removed from the display.
K5903058 /11 Nio 2MP LED Display
11
Installation
Image 24
2. Connect a video source from your workstation to the corresponding video
inputs on the display. Caution: Connect only one of the two video inputs.
Connecting both inputs simultaneously will result in driver errors.
Image 25
3. Connect the workstation’s USB host to the USB upstream connector on the
display if you want to make use of QAWeb or any of the display USB downstream
connectors (e.g. to connect a keyboard, mouse, touch pad or other peripheral).
Image 26
4. Connect the supplied external DC power supply to the power input on the
display.
Image 27
5. Route all cables through the cable duct in the stand of your display. For
better strain-relief and shielding of the cables, fix the cables with the
cable straps at the inside of the connector compartment.
12
K5903058 /11 Nio 2MP LED Display
Installation
Image 28
6. Close the connector compartment cover. You will hear a “click” sound when
the cover is in position.
Image 29
7. Connect the external DC power supply to a grounded power outlet by using
one of the power cables included with the display.
2.4 MXRT driver and Intuitive Workflow Tools installation
About
When you are using a Barco MXRT display controller, you can start up your Nio
2MP LED Display display system and install the MXRT driver and Intuitive
Workflow Tools . Barco’s Intuitive Workflow Tools are designed to increase
visibility of subtle details, improve focus during reading sessions, and
accelerate workflow.
To install the MXRT driver and Intuitive Workflow Tools
1. Switch on your Nio 2MP LED Display as described in “Standby switching”,
page 19. 2. Turn on the workstation connected to your display.
Your display will be running in a basic video mode at a default refresh rate
when first time starting up. 3. Download the latest MXRT driver and Intuitive
Workflow Tools from www.barco.com/mxrt.
K5903058 /11 Nio 2MP LED Display
13
Installation
4. Install the MXRT driver and Barco’s Intuitive Workflow Tools as described
in the Barco “Display Controller and Intuitive Workflow Tools” user guide on
the included documentation CD, or at www.barco.com/support.
5. When the drivers are completely installed, your display will automatically
detect the connected video input signal(s) and apply the correct video mode
and refresh rate.
2.5 QAWeb registration
About
QAWeb Enterprise helps you manage quality and assure compliance of your
expanding healthcare enterprise with less effort, lower cost, and complete
confidence. This fully automated and secure system guarantees a consistent
image quality and uptime for all registered imaging display systems within
your facility and across your enterprise. Learn more at www.barco.com/qaweb.
To register your display system to your QAWeb Enterprise organization, the
QAWeb Enterprise Agent must be installed and running on your workstation and
it must be able to communicate with the QAWeb Enterprise cloud service. For
more information and instructions, check the QAWeb Enterprise user guide on
www.barco.com/support/qaweb-enterprise.
When still using the older MediCal QAWeb, visit www.barco.com/support/medical-
qaweb to obtain the installation package and user documentation.
2.6 VESA-mount installation
CAUTION: Use suitable mounting apparatus to avoid risk of injury.
WARNING: Never move a display attached to an arm by pulling or pushing the
display itself. Instead, make sure that the arm is equipped with a VESA
compliant handle and use this to move the display. Please refer to the
instruction manual of the arm for more information and instructions.
WARNING: Use a mount that is compliant with the VESA 100 mm standard. Use a
mount that can support the weight of the display. Refer to the technical
specifications of this display for the applicable weight.
Overview
The panel, standard attached to the tilt & swivel foot, is compatible with the
VESA 100 mm standard. So it can be used with an arm stand according to the
VESA 100 mm standard. Therefore, the tilt & swivel foot must be removed from
the panel. 1. Put the display in the lowest position and lock the height
mechanism.
Image 210
2. Put the display face down on a clean and soft surface. Be careful not to
damage the panel screen.
14
K5903058 /11 Nio 2MP LED Display
3. Remove the plastic cover with a flathead screw driver.
Installation
Image 211
4. Slide the plastic cover over the neck of the foot.
Image 212
5. Remove the four screws fixing the foot while supporting the foot.
Image 213
6. Attach the arm stand firmly to the panel using 4 screws M4 x 8 mm.
K5903058 /11 Nio 2MP LED Display
15
Installation
16
K5903058 /11 Nio 2MP LED Display
Daily operation
3
K5903058 /11 Nio 2MP LED Display
17
Daily operation
3.1 Recommendations for daily operation
Optimize the lifetime of your display
Enabling the Display Power Management System (DPMS) of your display will
optimize its diagnostic lifetime by automatically switching off the backlight
when the display is not used for a specified period of time. By default, DPMS
is enabled on your display, but it also needs to be activated on your
workstation. To do this, go to the “Power Options” of your workstation.
Barco recommends setting DPMS activation after 20 minutes of non-usage.
Use a screen saver to avoid image retention
Prolonged operation of an LCD with the same content on the same screen area
may result in a form of image retention. You can avoid or significantly reduce
the occurrence of this phenomenon by using a screen saver. You can activate a
screen saver in the “Display properties” window of your workstation.
Barco recommends setting screen saver activation after 5 minutes of non-usage.
A good screen saver displays moving content.
In case you are working with the same image or an application with static
image elements for several hours continuously (so that the screen saver is not
activated), change the image content regularly to avoid image retention of the
static elements.
Understand pixel technology
LCD displays use technology based on pixels. As a normal tolerance in the
manufacturing of the LCD, a limited number of these pixels may remain either
dark or permanently lit, without affecting the diagnostic performance of the
product. To ensure optimal product quality, Barco applies strict selection
criteria for its LCD panels.
Enhance user comfort
Every Barco multi-head display system is color matched to the tightest
specifications in the market.
Barco recommends keeping color-matched displays together. Furthermore, it is
important to use all displays of a multi-head configuration at the same rate
to preserve color matching throughout the economic lifetime of the system.
Maximize quality assurance
QAWeb Enterprise helps you manage quality and assure compliance of your
expanding healthcare enterprise with less effort, lower cost, and complete
confidence. This fully automated and secure system guarantees a consistent
image quality and uptime for all registered PACS display systems within your
facility and across your enterprise.
Barco highly recommends to use QAWeb Enterprise. Learn more at
www.barco.com/qaweb.
3.2 Key indicator lights
About the key indicator lights
By default, the indicator lights of the keys will be off which makes the keys
unavailable at that moment. To make the keys illuminate and available for
further actions touch one of the keys. As a result, all keys will be
illuminated and are now available for further actions. However, if no further
actions are taken within the following 5 seconds, the keys will dim again.
18
K5903058 /11 Nio 2MP LED Display
Daily operation
The key auto-dim function can be disabled in the OSD menus. Please refer to
“Key indicator lights”, page 18 for detailed instructions on how to do this.
3.3 Standby switching
About standby switching
The connected power supply also provides a switch that can be used to turn the
power completely off. To use the display, please make sure to switch on this
power supply. This can be done by pushing the on/off switch on the power
supply into the “” position.
Switching on the display while it is in standby mode or vice versa can be done
by: 1. Illuminate the keys as previously described. 2. While the keys are
illuminated, touch the standby key for approximately 2 seconds. As a result,
the display will switch on or will switch to standby mode.
In case of a power outage recovery, your display will always start-up in the
power mode it was in before the power interruption (i.e. standby or on). This
protects your display against inadvertent image retention problems.
3.4 OSD menu access
About the OSD menu
The OSD menu allows you to configure different settings to make your Nio 2MP
LED Display fit your needs within your working environment. Also, you can
retrieve general information about your display and its current configuration
settings through the OSD menu.
To access the OSD menu
1. Press any of the front keys to illuminate and activate them.
2. While the keys are illuminated, press the Menu key ( ). The OSD main menu
comes up. 3. If the OSD menu locked message appears, wait for the message to
disappear, then press the following key
sequence: Menu Left Right Left Menu. After this, the OSD main menu
comes up.
3.5 OSD menu navigation
To navigate through the OSD menus
Navigating through the OSD menus can be done by: · Use the left/right keys to
move through the (sub)menus, change values or make selections. · To go into a
submenu or confirm adjustments and selections, use the menu key. · Use the
standby key to cancel adjustments or exit a (sub)menu. · Exit all OSD menus at
once by touching the standby key for approximately 2 seconds. The key icons
are displayed above the keys and are adapted to the function that it is used
for (menu dependent):
Left, Right
Menu
K5903058 /11 Nio 2MP LED Display
19
Daily operation Enter Cancel Standby (IEC 604175009)
20
K5903058 /11 Nio 2MP LED Display
Advanced operation
4
K5903058 /11 Nio 2MP LED Display
21
Advanced operation
4.1 OSD menu language
About the OSD menu language
By default, the OSD menu comes up in English. However, there’s a wide range of
other languages available for the OSD menu of your Nio 2MP LED Display.
To change the language of the OSD menu:
1. Bring up the OSD main menu. 2. Navigate to the Configuration > User
Interface > Menu menu. 3. Enter the Language submenu. 4. Select one of the
available languages and confirm.
4.2 OSD menu automatic close function
About the OSD menu automatic close function
By default, the OSD menu will disappear automatically after approximately 90
seconds of inactivity. However, this function can be disabled so that the OSD
menu remains on the screen until manually closed.
To enable/disable the OSD menu automatic close function:
1. Bring up the OSD main menu. 2. Navigate to the Configuration > User
Interface > Menu menu. 3. Enter the Automatic Close submenu. 4. Select
Enabled/Disabled as desired and confirm.
4.3 Power status LED
About the power status LED
By default, when the display is switched on, the power status LED is dimmed.
This behavior can be changed so that the power status LED will be green when
the display is switched on.
When the display is in stand-by mode, the power status LED will always turn
orange, even when the power status LED is disabled.
To enable/disable the power status LED:
1. Bring up the OSD main menu. 2. Navigate to the Configuration > User
Interface > Indicator Lights menu. 3. Enter the Power Status submenu. 4.
Select Enabled/Disabled as desired and confirm.
4.4 Key indicator lights
About the key indicator lights
By default, after lighting up, the key indicator lights will dim again if no
further actions are taken within the following 5 seconds. However, this
behavior can be changed so that the key indicator lights are always on or
always off.
To configure the key indicator lights
1. Bring up the OSD main menu. 2. Navigate to the Configuration > User
Interface > Indicator Lights menu. 3. Enter the Keys submenu.
22
K5903058 /11 Nio 2MP LED Display
Advanced operation
4. Select Automatic/Always On/Always Off as desired and confirm.
4.5 Power lock function
About the power lock function
By enabling the power lock function, the Nio 2MP LED Display is forced to
remain switched on. This means that it can’t be switched to stand-by mode
manually until the power lock function is disabled again.
To enable/disable the power lock function:
1. Bring up the OSD main menu. 2. Navigate to the Configuration > User
Interface > Controls menu. 3. Enter the Power Lock submenu. 4. Select
Enabled/Disabled as desired and confirm.
4.6 DPMS mode
About DPMS mode
Enabling the Display Power Management System (DPMS) mode on your display will
optimize its diagnostic lifetime by automatically switching off the backlight
when the display is not used for a specified period of time. By default, DPMS
mode is enabled on your display, but it also needs to be activated on your
workstation. To do this, go to the “Power options properties” window of your
workstation.
Barco recommends setting DPMS activation after 20 minutes of non-usage.
When DPMS mode is enabled, an additional power saving function becomes
available: hibernate. See “Hibernate”, page 23 for more information.
To enable/disable DPMS mode on your display:
1. Bring up the OSD main menu. 2. Navigate to the Configuration > Power
Management menu. 3. Enter the DPMS Mode submenu. 4. Select Enabled/Disabled as
desired and confirm.
4.7 Hibernate
About hibernate
When hibernate is enabled, not only the backlight will be switched off, but
also other functionalities will be disabled to further reduce power
consumption to a minimum. This happens after a specific period of time which
can be manually adjusted.
Hibernate can only be enabled on your display when the DPMS mode is enabled
first. Therefore, please refer to “DPMS mode”, page 23 to do this.
Please connect your keyboard or mouse to your PC rather than to the display’s
USB ports when hibernate is enabled.
To enable/disable hibernation on your display:
1. Bring up the OSD main menu. 2. Navigate to the Configuration > Power
Management menu. 3. Enter the Hibernate submenu.
K5903058 /11 Nio 2MP LED Display
23
Advanced operation
4. Select Enabled/Disabled as desired and confirm.
To specify the hibernate time-out:
1. Bring up the OSD main menu. 2. Navigate to the Configuration > Power
Management menu. 3. Enter the Hibernate Timeout submenu. 4. Set the time-out
value as desired and confirm.
4.8 Luminance target
About the luminance target
The luminance target of your Nio 2MP LED Display is adjustable over a
predefined range. When you change the luminance target, the display will
adjust its backlight to reach the target.
To set the luminance target:
1. Bring up the OSD main menu. 2. Navigate to the Configuration > Calibration
menu. 3. Enter the Luminance Target submenu. 4. Set a luminance target value
as desired and confirm.
The default, factory DICOM calibrated luminance value is available in the
technical specifications table. The guaranteed backlight lifetime is valid for
this setting.
4.9 Viewing modes
About viewing modes
The Nio 2MP LED Display can be used in two viewing modes: · Diagnostic: This
mode provides the full calibrated luminance and is intended for using the
display for
diagnostic purposes. · Text: In this mode, the luminance is reduced to
approximately half of the luminance. This is intended for
using the display with office applications such as word processing. Please
note that text mode is not persistent, once powered off, the unit will restart
in diagnostic mode.
The diagnostic mode should always be selected when the Nio 2MP LED Display is
intended to be used in a diagnostic environment.
To select a viewing mode:
1. Bring up the OSD main menu. 2. Navigate to the Configuration > Calibration
menu. 3. Enter the Viewing Mode submenu. 4. Select Diagnostic/Text as desired
and confirm.
4.10 Display functions
About display functions
Native, uncorrected panels will display all grayscale/color levels with
luminance increments that are not optimal for crucial diagnostic information.
Studies have shown however, that in medical images certain grayscale/color
parts contain more diagnostic information then others. To respond to these
conclusions,
24
K5903058 /11 Nio 2MP LED Display
Advanced operation
display functions have been defined. These functions emphasize on these parts
containing crucial diagnostic information by correcting the native panel
behavior. The available display functions for your Nio 2MP LED Display are: ·
Native: If you select Native, the native panel behavior will not be corrected.
· Dynamic Gamma 1.8 or 2.2: These are gamma functions that are shifted to take
into account the non-zero
luminance of an LCD panel when driven with a “black” signal. They are
especially useful in CT applications to improve the perception of low
Hounsfield values. · DICOM: DICOM (Digital Imaging and Communications in
Medicine) is an international standard that was developed to improve the
quality and communication of digital images in radiology. In short, the DICOM
display function results in more visible grayscales in the images. Barco
recommends selecting the DICOM display function for most medical viewing
applications. · User: This display function will be automatically selected
when display functions are defined by MediCal QAWeb. · Gamma 1.8 or 2.2:
Select one of these display functions in case the display is to replace a CRT
display with a gamma of 1.8 or 2.2 respectively.
The settings of the display must be adapted to suit the requirements of the
visualization software. In case of doubt, please contact the vendor of the
visualization software.
To select a display function:
1. Bring up the OSD main menu. 2. Navigate to the Configuration > Calibration
menu. 3. Enter the Display Function submenu. 4. Select one of the available
display functions and confirm.
4.11 Reading rooms
About reading rooms
Reading rooms can only be selected when the DICOM display function is
selected. Therefore, please refer to “Display functions”, page 24 to correctly
set the display function.
The American Association of Physicists in Medicine (AAPM) composed a list of
pre-defined reading rooms. Each of these reading rooms are defined by
following parameters: · the maximum light allowed in this type of room The
available reading rooms for your Nio 2MP LED Display are: · Dark Room:
Corresponds to light conditions of ideal dark room. This setting disables the
ambient light
compensation. · CR/DR/ MAMMO: Corresponds to light conditions in diagnostic
reading rooms for computed radiology,
digital radiology or mammography. This setting has the lowest maximum ambient
light. · CT/MR/NM: Corresponds to light conditions in diagnostic reading rooms
for computed tomography,
magnetic resonance or nuclear medicine scans. · Staff Office: Corresponds to
light conditions in office rooms. · Clinical Viewing Room: Corresponds to
light conditions in diagnostic reading rooms for clinical viewing. · Emergency
Room: Corresponds to light conditions in emergency rooms. · Operating Room:
Corresponds to light conditions in operating rooms. This setting has the
highest
maximum ambient light.
To select a reading room:
1. Bring up the OSD main menu. 2. Navigate to the Configuration > Calibration
Reading Room menu. 3. Enter the Reading Room submenu. 4. Select one of the available reading rooms and confirm.
K5903058 /11 Nio 2MP LED Display
25
Advanced operation
4.12 Display orientation
About Display orientation
Your display automatically detects its physical orientation (portrait or
landscape) and, by default, automatically adjusts the image orientation to
this. This means that when your display is physically rotated, the image will
rotate along. The OSD menu however, allows to overrule this behavior and force
the image orientation to portrait or landscape regardless of the physical
orientation of the display. This may be especially useful when operating your
display with the screen facing upwards.
To set the Display orientation
1. Bring up the OSD main menu. 2. Navigate to the Configuration > Image
Sources menu. 3. Enter the Display Orientation submenu. 4. Select
Landscape/Portrait/Automatic as desired and confirm.
4.13 Video input signals
About input signals
The available input signals for your display are: · DisplayPort 1: The input
corresponding to the DisplayPort connector. · DVI 1: The input corresponding
to the DVI connector. · Automatic Selection: The input is automatically
selected.
To manually select a video input signal:
1. Bring up the OSD main menu. 2. Navigate to the Configuration > Image
Source menu. 3. Enter the Input Signal submenu. 4. Select one of the available
input signals and confirm.
4.14 EDID timings
About EDID timings
Following EDID timings are available for your Nio 2MP LED Display: · Refresh
Rate: Allows to manually select the refresh rate of the image source video
input signal depending
on the maximum refresh rate of the display controller connected to your
display. · Preferred Orientation: Allows to change the orientation of the
image source video input signal to
landscape, portrait or to let the display automatically assign the correct
orientation. · Color Depth: Allows to change the color depth to 8 or to 10
bit.
To manually set EDID timings:
1. Bring up the OSD main menu. 2. Navigate to the Configuration > Image
Source menu. 3. Enter the Timings submenu. 4. Select Refresh Rate, Preferred
Orientation or Color Depth. 5. Select one of the available settings and
confirm.
26
K5903058 /11 Nio 2MP LED Display
Advanced operation
4.15 Display info
About display info
Your display serial number, color type, native resolution, firmware versions,
etc. are available in a dedicated submenu of the OSD menu.
To retrieve info about your display:
1. Bring up the OSD main menu. 2. Navigate to the About this Display menu to
make the information visible on the screen.
4.16 Display status
About display status
The Status submenu of the OSD menu provides info on the current status of your
display (runtimes, temperatures, etc.), the status of the connected image
sources (video encoding mode, timings, etc.), the current calibration status
of your display (display function, luminance, ALC, etc.) and the status about
activated connections.
To retrieve the status of your display:
1. Bring up the OSD main menu. 2. Navigate to the Status menu. 3. Enter the
Display, Image Sources, Calibration or Connectivity submenu as desired.
K5903058 /11 Nio 2MP LED Display
27
Advanced operation
28
K5903058 /11 Nio 2MP LED Display
Maintenance
5
K5903058 /11 Nio 2MP LED Display
29
Maintenance
5.1 Scheduled maintenance
About
The Nio 2MP LED Display does not require any scheduled maintenance or
calibration activities. We recommend to use QAWeb with the Barco default tests
and frequencies to calibrate and maintain the display, or to return the
display to a Barco approved maintenance organization. In any case of doubts,
please contact Barco Healthcare.
5.2 Cleaning instructions
To clean the display
Apply a cleaning/disinfecting product to a soft lint-free cloth, such as a
microfiber or gauze and rub the display surface thoroughly. In order to be
effective, all surfaces must be cleaned for a certain amount of time (ranging
from 30 seconds to 2 minutes).
Use a cleaning/disinfecting product that is alcohol-, alkali-, water- or
chlorine-based. Common examples are:
· Isopropanol 100% · Ethanol 70% · 0.5% Chlorehexidine in 70%
ethanol/isopropanol · Ortho-Phthalaldehyde (OPA) 0.55% · Haemo-sol, 1% in
water · 250 ppm Chlorine solution · 1.0% lodine in 70% ethanol · 1.6% aqueous
ammonia · “Green soap” (USP) · 0.5% Chlorehexidine in 70% isopropyl alcohol ·
Products similar to optical cleaning liquid · Bacillol AF · Flux · Sodium
hypochlorite 10%
When selecting an alternative cleaning/disinfecting product, it is recommended
to always identify the active ingredients. In case of doubt about a certain
cleaning product, use plain water.
Do not use any of the following products:
· Alcohol in concentrations > 70% · Strong alkalis lye, strong solvents ·
Acetone · Toluene · Acids · Detergents containing fluoride · Detergents
containing ammonia · Detergents containing abrasives · Steel wool · Sponge
with abrasives · Steel blades · Cloths with steel thread · Paper-based cloths
(e.g. paper towels, facial tissues, toilet paper)
CAUTION: Read and follow all instructions on the label of the cleaning
product.
CAUTION: Take care not to damage or scratch the front glass or LCD. Be careful
with rings or other jewelry and do not apply excessive pressure on the front
glass or LCD.
30
K5903058 /11 Nio 2MP LED Display
Maintenance
CAUTION: When a small object or dust is tucked between the front bezel and the
LCD surface (for displays without front glass), carefully remove with a soft
object such as a plastic card or finger nail. Do not use sharp objects such as
paperclips or tweezers to avoid damage to the LCD. CAUTION: Do not apply or
spray liquid directly to the display as excess liquid may cause damage to
internal electronics. Instead, apply the liquid to a cleaning cloth.
K5903058 /11 Nio 2MP LED Display
31
Maintenance
32
K5903058 /11 Nio 2MP LED Display
Important information
6
K5903058 /11 Nio 2MP LED Display
33
Important information
6.1 Safety information
General recommendations
Read the safety and operating instructions before operating the device. Retain
safety and operating instructions for future reference. Adhere to all warnings
on the device and in the operating instructions manual. Follow all
instructions for operation and use.
Electrical Shock or Fire Hazard
To prevent electric shock or fire hazard, do not remove cover. No serviceable
parts inside. Refer servicing to qualified personnel. Do not expose this
apparatus to rain or moisture.
Modifications to the unit
Do not modify this equipment without authorization of the manufacturer.
Type of protection (electrical):
Display with external power supply: Class I equipment.
Degree of safety (flammable anesthetic mixture)
Equipment not suitable for use in the presence of a flammable anesthetic
mixture with air or with oxygen or nitrous oxide.
Non-patient care equipment
· Equipment primarily for use in a health care facility that is intended for
use where contact with a patient is unlikely (no applied part).
· The equipment shall not be used with life support equipment. · The user
should not touch the equipment, nor its signal input ports (SIP)/signal output
ports (SOP) and the
patient at the same time.
Power connection Equipment with external 24 VDC power supply
· Power requirements: The equipment must be powered using the delivered
medical approved 24 VDC ( ) SELV power supply.
· The medical approved DC ( ) power supply must be powered by the AC mains
voltage. · The power supply is specified as a part of the ME equipment or
combination is specified as a ME system. · To avoid the risk of electric
shock, this equipment must only be connected to a supply mains with protective
earth. · The equipment should be installed near an easily accessible outlet. ·
The equipment is intended for continuous operation.
Transient over-voltage
If the device is not used for a long time, disconnect it from the AC inlet to
avoid damage by transient overvoltage. To fully disengage the power to the
device, please disconnect the power cord from the AC inlet.
High magnetic environment
· The device shall not be used in the high magnetic environment of an MRI
scanner. · The installer shall assess the magnetic environment before
installation or use of the device.
Power cords
· Do not overload wall outlets and extension cords as this may result in fire
or electric shock.
34
K5903058 /11 Nio 2MP LED Display
Important information
· Mains lead protection (U.S.: Power cord): Power cords should be routed so
that they are not likely to be walked upon or pinched by items placed upon or
against them, paying particular attention to cords at plugs and receptacles.
· Use a power cord that matches the voltage of the power outlet, which has
been approved and complies with the safety standard of your particular
country.
· Korea: Use KC certified products; Plug: 250 V~, 16 A; Power cord: 60227 IEC
53, 3G0.75 mm² / 60227 IEC 53, 3G1.0 mm²; Connector: 250 V~, 10 A
Grounding reliability
Grounding reliability can only be achieved when the equipment is connected to
an equivalent receptacle marked “Hospital Only” or “Hospital Grade” (located
on product or power supply cord)
Accessory equipment
Accessory equipment connected to the analog and digital interfaces must be in
compliance with the respective nationally harmonized IEC standards (i. e. IEC
60950 for data processing equipment, IEC 60065 for video equipment, IEC
61010-1 for medical equipment). Furthermore, all configurations shall comply
with the system standard IEC 60601-1-1. Anyone who connects additional
equipment tot the signal input part or signal output part is configuring a
medical system, and is therefore, responsible that the system complies with
the requirements of the system standard IEC 60601-1-1. The unit is for
exclusive interconnection with IEC 606011 certified equipment in the patient
environment and IEC 60XXX certified equipment outside of the patient
environment. If in doubt, consult the technical services department or your
local representative.
Water and moisture
Never expose the display to rain or moisture.
Never use the display near water – e.g. near a bathtub, washbasin, swimming
pool, kitchen sink, laundry tub or in a wet basement.
Ventilation
Do not cover or block any ventilation openings in the cover of the set. When
installing the device in a cupboard or another enclosed location, heed the
necessary space between the set and the sides of the cupboard.
Installation
Place the device on a flat, solid and stable surface that can support the
weight of at least 3 devices. If you use an unstable cart or stand, the device
may fall, causing serious injury to a child or adult, and serious damage to
the device.
Malfunctions
Disconnect the equipment’s power cord from the AC inlet and refer servicing to
qualified service technicians under the following conditions:
· If the power cord or plug is damaged or frayed. · If liquid has been spilled
into the equipment. · If the equipment has been exposed to rain or water. · If
the equipment does not operate normally when the operating instructions are
followed. Adjust only those
controls that are covered by the operating instructions since improper
adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to normal
operation. · If the equipment has been dropped or the cabinet has been
damaged. · If the product exhibits a distinct change in performance,
indicating a need for service.
National Scandinavian Deviations for CL. 1.7.2
Finland: “Laite on liitettävä suojamaadoituskoskettimilla varustettuun
pistorasiaan”
Norway: “Apparatet må tilkoples jordet stikkontakt”
Sweden: “Apparaten skall anslutas till jordat uttag”
K5903058 /11 Nio 2MP LED Display
35
Important information
Operating principle
The single device output analog signals through ADC element (Analog Digital
Convert) conversion to become a digital signal and the video signal is via
Video Decoder conversion. It has become the same digital signal, these signals
via Scaler IC as zoom in or out action and digital image processing, then
through the cable line transmission LVDS signals to one of the LCD module. The
last by the clock controller (Timing Controller, TCON), the clock signal is
transmitted to the drive IC on the panel and turn on Backlight for LCD module
light source by Scaler control. Intended patient population: adults of
infants.
BSMI
: : 1. 3010 2. , 21
6.2 Cybersecurity
Hospital IT security
To prevent unauthorized access to the device, the organization incorporating
the Nio 2MP LED Display in their IT network, shall have the necessary state-
of-the-art policies, processes, standards and other security measures in place
to incorporate, support and protect a medical device into the IT network. This
shall include the application of risk management (e.g. by following IEC
80001-1:2010 or equivalent standards).
6.3 Environmental information
Disposal Information
Waste Electrical and Electronic Equipment
This symbol on the product indicates that, under the European Directive
2012/19/EU governing waste from electrical and electronic equipment, this
product must not be disposed of with other municipal waste. Please dispose of
your waste equipment by handing it over to a designated collection point for
the recycling of waste electrical and electronic equipment. To prevent
possible harm to the environment or human health from uncontrolled waste
disposal, please separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of material resources.
For more information about recycling of this product, please contact your
local city office or your municipal waste disposal service.
For details, please visit the Barco website at:
http://www.barco.com/AboutBarco/weee
Turkey RoHS compliance
Türkiye Cumhuriyeti: AEEE Yönetmeliine Uygundur. [Republic of Turkey: In
conformity with the WEEE Regulation] RoHS
Chinese Mainland RoHS RoHS Barco/RoHSMCV “”
36
K5903058 /11 Nio 2MP LED Display
Important information
According to the “Management Methods for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products ” (Also called RoHS of Chinese Mainland), the table below lists the names and contents of toxic and/or hazardous substances that Barco’s product may contain. The RoHS of Chinese Mainland is included in the MCV standard of the Ministry of Information Industry of China, in the section “Limit Requirements of toxic substances in Electronic Information Products”.
() Component name
Printed Circuit Assemblies
Hazardous substances and elements
Pb
Hg
Cd
Cr6+
X
O
O
O
PBB O
PBDE O
X
O
O
O
O
O
LCD panel
()
X
O
O
O
O
O
External Cables
O
O
O
O
O
O
Internal wiring
O
O
O
O
O
O
Metal enclosure
O
O
O
O
O
O
Plastic enclosure ()
O
O
O
O
O
O
Heatsinks
O
O
O
O
O
O
Fan
X
O
O
O
O
O
Power Supply Unit
O
O
O
O
O
O
Paper Manuals
O
O
O
O
O
O
CD manual SJ/T 11364
This table is prepared in accordance with the provisions of SJ/T 11364.
O: GB/T 26572 .
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in GB/T 26572.
X: GB/T 26572 .
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T 26572.
EIP EFUPBarcoEFUP
All Electronic Information Products (EIP) that are sold within Chinese
Mainland must comply with the “Marking for the restriction of the use of
hazardous substances in electrical and electronic product” of Chinese
Mainland, marked with the Environmental Friendly Use Period (EFUP) logo. The
number inside the EFUP logo that Barco uses (please refer to the photo) is
based on the “General guidelines of environment-friendly use period of
electronic information products” of Chinese Mainland.
10
K5903058 /11 Nio 2MP LED Display
37
Important information
RoHS / China RoHS SDoC mark
This product meets the requirements of the “Management Rule on the Use Restriction of Hazardous Substances in Electrical and Electronic Products” and the “Management Catalogue for the Use Restriction of Hazardous Substances in Electrical and Electronic Products”.
SDoC
The green SDoC mark is visible in the digital version of this document.
Taiwan BSMI RoHS
Unit
Restricted substances and its chemical symbols
Lead Mercury Cadmium
(Pb) (Hg)
(Cd)
Hexavalent chromium
(Cr+6)
Polybrominated biphenyls
(PBB)
Polybrominat-
ed diphenyl ethers
(PBDE)
()
O
O
O
O
O
PCBA (including the components)
O
O
O
O
O
LCD
O
O
O
O
O
Power adapter
/
O
O
O
O
O
O
Cable / connector –
O
O
O
O
O
Mechanical parts Metal
O
O
O
O
O
O
Plastic cover /
O
O
O
O
O
Power supply / signal cable
–
O
O
O
O
O
O
Mechanical Parts Others
/() O
O
O
O
O
O
Paper/Ink (Label, Instruction and packaging etc.)
O
O
O
O
O
O
Backlight assembly
1.0.1 wt %0.01 wt %
Note 1: “exceeding 0.1 wt%” and “exceeding 0.01 wt%” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.
2.O
Note 2: “O” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
3.
Note 3: The “” indicates that the restricted substance corresponds to the exemption.
38
K5903058 /11 Nio 2MP LED Display
Important information
6.4 Regulatory compliance information
Indications for use
The display is intended to be used for displaying and viewing digital images
(excluding digital mammography) for review and analysis by trained medical
practitioners.
Intended usage environment
· The display is not in contact with patients. · The display is not in the
same environment as the patient. · The display is intended to be used in a
dedicated diagnostic reading room. Caution (USA): Federal law restricts this
device to sale by or on the order of a physician. (Details & exemptions are in
the Code of Federal Regulations Title 21, 801 Part D).
Contra-indications
The device is not intended for digital mammography.
Intended users
Barco diagnostic displays are intended to be used for primary diagnosis by
trained medical practitioners. The device is initially set up by trained
integrators or medical IT staff.
Expected clinical benefits
The device aids in diagnosing patients.
Notice to the user and/or patient
Any serious incident that has occurred in relation to the device should be
reported to the manufacturer and the competent authority of the Member State
in which the user and/or patient is established.
Factory address
Coretronic Projection (Kunshan) Corp, No.20, 3rd Ave, Kunshan Free Trade Zone,
Kunshan, Jiangsu, 215300 China
Manufacturing country
The manufacturing country of the product is indicated on the product label
(“Made in …”).
Importers contact information
To find your local importer, contact one of Barco’s regional offices via the
contact information provided on our website (www.barco.com).
FCC class B
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This device has
been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This device generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this device does cause harmful interference to radio or television reception,
which can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures: · Reorient or relocate the receiving antenna. · Increase the
separation between the device and receiver. · Connect the device into an
outlet on a circuit different from that to which the receiver is connected.
K5903058 /11 Nio 2MP LED Display
39
Important information
· Consult the dealer or an experienced radio/TV technician for help. Changes
or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. FCC
responsible: Barco Inc., 3059 Premiere Parkway Suite 400, 30097 Duluth GA,
United States, Tel: +1 678 475 8000
Canadian notice
CAN ICES-001(B) / NMB-001(B)
Brazilian local representative
BARCO LTDA, Av. Ibirapuera, 2332 Torre II 8° andar, Sao Paulo, Brazil
6.5 EMC notice
General information
This device is for use in professional healthcare facility environments only.
With the installation of the device, use only the delivered external cables
and power supply or a spare part provided by the legal manufacturer. Using
another can result in a decrease of the immunity level of the device.
WARNING: Use of this equipment adjacent to or stacked with other equipment
should be avoided because it could result in improper operation. If such use
is necessary, this equipment and the other equipment should be observed to
verify that they are operating normally.
WARNING: Use of accessories, transducers and cables other than those specified
or provided by the manufacturer of this equipment could result in increased
electromagnetic emissions or decreased electromagnetic immunity of this
equipment and result in improper operation.
WARNING: Portable RF communications equipment (including peripherals such as
antenna cables and external antennas) should be used no closer than 30 cm (12
inches) to any part of the Nio 2MP LED Display, including cables specified by
the manufacturer. Otherwise, degradation of the performance of this equipment
could result.
Electromagnetic emissions
The Nio 2MP LED Display is intended for use in the electromagnetic environment
specified below. The customer or the user of the Nio 2MP LED Display should
assure that it is used in such an environment.
Emissions test
RF emissions CISPR 11
Compliance Group 1
RF emissions
CISPR 11 Harmonic emissions
IEC 61000-3-2 Voltage fluctuations/ flicker emissions
IEC 61000-3-3
Class B Class D Complies
Electromagnetic environment Guidance The Nio 2MP LED Display uses RF energy
only for its internal function. Therefore, its RF emissions are very low and
are not likely to cause any interference in nearby electronic equipment.
The Nio 2MP LED Display is suitable for use in all establishments, including
domestic establishments and those directly connected to the public low-voltage
power supply network that supplies buildings used for domestic purposes.
This Nio 2MP LED Display complies with appropriate medical EMC standards on emissions to, and interference from surrounding equipment. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
40
K5903058 /11 Nio 2MP LED Display
Important information
Interference can be determined by turning the equipment off and on.
If this equipment does cause harmful interference to, or suffer from harmful
interference of, surrounding equipment, the user is encouraged to try to
correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna or equipment. · Increase the
separation between the equipment and receiver. · Connect the equipment into an
outlet on a circuit different from that to which the receiver is connected. ·
Consult the dealer or an experienced technician for help.
Electromagnetic immunity
The Nio 2MP LED Display is intended for use in the electromagnetic environment
specified below. The customer or the user of the Nio 2MP LED Display should
assure that it is used in such an environment.
Immunity test
IEC 60601-1-2 test levels Compliance level
Electromagnetic environment guidance
Electrostatic discharge (ESD) IEC 61000-4-2
Electrical fast transient/ burst IEC 61000-4-4
± 8 kV contact
± 8 kV contact
Floors should be wood,
± 2 kV, ± 4 kV, ± 8 kV, ± 15 ± 2 kV, ± 4 kV, ± 8 kV, ± 15 concrete or ceramic tile. If
kV air
kV air
floors are covered with
synthetic material, the
relative humidity should be
at least 30%
± 2 kV for power supply ± 2 kV for power supply Mains power quality
lines
lines
should be that of a typical
± 1 kV for input/ output lines
± 1 kV for input/ output lines
commercial or hospital environment
100 kHz repetition frequency
100 kHz repetition frequency
Surge IEC61000-4-5
Line to line: ± 0.5 kV, ± 1 Line to line: ± 0.5 kV, ± 1 Mains power quality
kV
kV
should be that of a typical
Line to ground: ± 0.5 kV, ± Line to ground: ± 0.5 kV, ± commercial or hospital
1 kV, ± 2 kV
1 kV, ± 2 kV
environment
Voltage dips, short
0% residual voltage for 0.5 0% residual voltage for 0.5 Mains power quality
interruptions and voltage period at 0°, 45°, 90°,
period at 0°, 45°, 90°,
should be that of a typical
variations on power supply 135°, 180°, 225°, 270° 135°, 180°, 225°, 270° commercial or hospital
input lines
and 315°
and 315°
environment. If the user of
IEC 61000-4-11
0% residual voltage for 1 period at 0°
70% residual voltage for 25 periods at 0°
Voltage interruptions: 0% residual voltage for 250 periods at 0°
0% residual voltage for 1 period at 0°
70% residual voltage for 25 periods at 0°
Voltage interruptions: 0% residual voltage for 250 periods at 0°
the Nio 2MP LED Display requires continued operation during power mains interruptions, it is recommended that the Nio 2MP LED Display be powered from an uninterruptible power
supply or a battery
Power frequency (50/60 Hz) magnetic field
IEC 61000-4-8
30 A/m
Conducted RF IEC 61000-4-6
Radiated RF
3 Vrms (6 Vrms in ISM bands)
150 kHz to 80 MHz 3 V/m
Not applicable 2
3 Vrms (6 Vrms in ISM bands) 3 V/m
Power frequency magnetic fields should be at levels characteristic of a
typical location in a typical commercial or hospital environment
–
IEC 61000-4-3
80 MHz to 2.7 GHz
2. Nio 2MP LED Display doesn’t contain components that are susceptible to magnetic fields.
K5903058 /11 Nio 2MP LED Display
41
Important information
Immunity to RF wireless communications equipment
Test frequency
(MHz) 385
450
710 745 780 810 870 930
1720 1845 1970
2450
5240 5500 5785
Band (MHz)
Service
Modulation
380 390 430 470 704 787
TETRA 400
GMRS 460, FRS 460
LTE Band 13, 17
Pulse modulation
18 Hz
FM ± 5 kHz deviation
1 kHz sine
Pulse modulation
217 Hz
800 960 1700 1990 2400 2570 5100 5800
GSM 800/ 900, TETRA 800, iDEN 820, CDMA
850, LTE Band 5
GSM 1800, CDMA 1900, GSM 1900, DECT, LTE Band 1/3/4/
25, UMTS
Bluetooth, WLAN,
802.11 b/g/n, RFID 2450, LTE Band 7
W LAN 802.11 a/n
Pulse modulation
18 Hz
Pulse modulation
217 Hz
Pulse modulation
217 Hz
Pulse modulation
217 Hz
Maximum power (W)
1.8 2 0.2 2
2
2 0.2
Distance (m) 0.3
Immunity test level (V/
m) 27
0.3
28
0.3
9
0.3
28
0.3
28
0.3
28
0.3
9
6.6 Explanation of symbols
Symbols on the device
On the device or power supply, you may find the following symbols
(nonrestrictive list):
Indicates the device meets the requirements of the applicable EC directives/
regulations.
Indicates compliance with Part 15 of the FCC rules (Class A or Class B).
Indicates the device is approved according to the UL regulations
42
K5903058 /11 Nio 2MP LED Display
Important information Indicates the device is approved according to the UL regulations for Canada and US Indicates the device is approved according to the UL regulations for Canada and US
E352529
IS 13252 (Part 1) IEC 60950-1 R-xxxxxxxx
www.bis.gov.in
Indicates the device is approved according to the UL Demko regulations.
Indicates the device is approved according to the CCC regulations. Indicates
the device is approved according to the VCCI regulations. Indicates the device
is approved according to the KC regulations.
Indicates the device is approved according to the BSMI regulations. Indicates
the device is approved according to the PSE regulations. Indicates the device
is approved according to the RCM regulations. Indicates the device is approved
according to the EAC regulations. Caution: Federal law (United Stated of
America) restricts this device to sale by or on the order of a licensed
healthcare practitioner. Indicates the device is approved according to the BIS
regulations.
Indicates the device is approved according to the INMETRO regulations.
Indicates the USB connectors on the device.
K5903058 /11 Nio 2MP LED Display
43
Important information Indicates the DisplayPort connectors on the device. Indicates the legal manufacturer.
Indicates the manufacturing date.
Indicates the entity importing the medical device into the locale.
yy xx
MD SN
REF UDI
EC REP CH REP
Indicates the temperature limitations3 for the device to safely operate within specs. Indicates that the device is a Medical Device. Indicates the device Serial Number. Indicates the device part number or catalogue number. Indicates the Unique Device Identifier. Indicates the Authorised Representative for the European Union. Indicates the Authorised Representative for Switzerland. Warning: dangerous voltage
Caution
eIFU indicator
Consult the Instructions For Use.
Consult the Instruction For Use on the website address that is provided as
eIFU indicator.
3. Values for xx and yy can be found in the technical specifications paragraph.
44
K5903058 /11 Nio 2MP LED Display
Important information Indicates this device must not be thrown in the trash
but must be recycled, according to the European WEEE (Waste Electrical and
Electronic Equipment) directive.
Indicates Direct Current (DC). Indicates Alternating Current (AC). Stand-by
Equipotentiality
Protective earth (ground)
or
Symbols on the box
On the box of the device, you may find the following symbols (nonrestrictive
list): Indicates a device that can be broken or damaged if not handled
carefully when being stored.
Indicates a device that needs to be protected from moisture when being stored.
1n5
n
or
xx-yy Kg
or
xx-yy xx-yy
Indicates the storage direction of the box. The box must be transported,
handled and stored in such a way that the arrows always point upwards.
Indicates the maximum number of identical boxes which may be stacked on each
other, where “n” is the limiting number.
Indicates the weight of the box and that it should be carried with two
persons.
Indicates that the box should not be cut with a knife, a cutter or any other
sharp object.
-2x0x °C
+6y0y °C
Indicates the temperature limits4 to which the device can be safely exposed when being stored.
K5903058 /11 Nio 2MP LED Display
45
Important information
8y5y % 5x %
1y0y6y kPa 5x0x kPa
Indicates the range4 of humidity to which the device can be safely exposed
when being stored.
Indicates the range4of atmospheric pressure to which the device can be safely
exposed when being stored.
6.7 Legal disclaimer
Disclaimer notice
Although every attempt has been made to achieve technical accuracy in this
document, we assume no responsibility for errors that may be found. Our goal
is to provide you with the most accurate and usable documentation possible; if
you discover errors, please let us know.
Barco software products are the property of Barco. They are distributed under
copyright by Barco NV or Barco Inc., for use only under the specific terms of
a software license agreement between Barco NV or Barco Inc. and the licensee.
No other use, duplication, or disclosure of a Barco software product, in any
form, is authorized.
The specifications of Barco products are subject to change without notice.
Trademarks
All trademarks and registered trademarks are property of their respective
owners.
Copyright notice
This document is copyrighted. All rights are reserved. Neither this document,
nor any part of it, may be reproduced or copied in any form or by any means –
graphical, electronic, or mechanical including photocopying, taping or
information storage and retrieval systems – without written permission of
Barco.
© 2021 Barco NV all rights reserved.
Patent protection
Please refer to www.barco.com/about-barco/legal/patents
Product Security Incident Response
As a global technology leader, Barco is committed to deliver secure solutions
and services to our customers, while protecting Barco’s intellectual property.
When product security concerns are received, the product security incident
response process will be triggered immediately. To address specific security
concerns or to report security issues with Barco products, please inform us
via contact details mentioned on https://www.barco.com/psirt.
To protect our customers, Barco does not publicly disclose or confirm security
vulnerabilities until Barco has conducted an analysis of the product and
issued fixes and/or mitigations.
6.8 Technical specifications
Overview
Screen technology Active screen size (diagonal)
IPS-Pro 540 mm (21.3″)
4. Values for xx and yy can be found in the technical specifications paragraph.
46
K5903058 /11 Nio 2MP LED Display
Important information
Active screen size (H x V)
432 x 324 mm (17.0 x 12.8″)
Aspect ratio (H:V)
4:3
Resolution
2MP (1600 x 1200 pixels)
Pixel pitch
0.27 mm
Color imaging
Yes
Gray imaging
Yes
Bit depth
30 bit
Viewing angle (H, V)
178°
Uniformity correction
ULT
Ambient light presets
Yes, reading room selection
Ambient light sensor
Yes
Backlight Output
Yes
Stabilization (BLOS)
Front sensor Maximum luminance (panel typical)
Yes 800 cd/m²
DICOM calibrated luminance 500 cd/m² Contrast ratio (panel typical) 1400:1
Response time ((Tr + Tf)/2) (typical)
10 ms
Housing color
RAL 9003 / RAL 9004
Video input signals
1x DVI 1x DisplayPort
USB ports
1x USB 2.0 upstream (endpoint) 2x USB 2.0 downstream
Power rating
24 VDC, 3.75 A
Power requirements
This device shall only be powered by the following medical approved power
supply:
Bridgepower, type JMW190KB2400F11
Ratings marked on the medical power supply: · Input rating: 100240 VAC, 2 A,
5060 Hz · Output rating: 24 VDC, 3.75 A
Power consumption
50 W (nominal) < 1 W (hibernate) < 1 W (standby)
Dimensions with stand (W x Portrait: 378 x 525~625 x 235 mm
H x D)
Landscape: 491 x 466~566 x 235 mm
Dimensions w/o stand (W x Portrait: 378 x 491 x 83 mm
H x D)
Landscape: 491 x 378 x 83 mm
Dimensions packaged (W x 655 x 388 x 495 mm H x D)
K5903058 /11 Nio 2MP LED Display
47
Important information
Net weight with stand Net weight w/o stand Net weight packaged Tilt Swivel
Pivot Height adjustment range Mounting standard Recommended modalities
Certifications
Supplied accessories
QA software Warranty Operating temperature Storage temperature Operating
humidity Storage humidity
With protective cover: 12.6 kg Without protective cover: 11.3 kg
With protective cover: 7.6 kg Without protective cover: 6.3 kg
With protective cover: 16.8 kg (without optional accessories) Without
protective cover: 15.5 kg (without optional accessories)
-5° to +25°
-30° to +30°
90°
100 mm
VESA (100 mm)
All digital images, except digital mammography
CE1639 (MDD 93/42/EEC; A1:2007/47/EC class IIb product) IEC 60601-1(ed.3); IEC
60601-1(ed.3 am1) ANSI/AAMI ES60601-1(2005+C1:09+A2:10+A1:12) CAN/CSA-C22.2
No. 60601-1(2014) EN 60601-1-2:2015 EN 60601-1:2006/A11:2011/A12:2014; EN
60601-1:2006/A1:2013 CCC – GB9254-2008 + GB4943.1-2011 + GB17625.1-2012 KC BIS
BSMI EAC INMETRO VCCI FCC class B ICES-001 Level B FDA 510(k) RoHS
User guide Documentation disc System sheet Video cable Mains cable(s) USB
cable External power supply
QAWeb
5 years, including 20000 hrs backlight warranty
0 °C to 35 °C (15 °C to 30 °C within specs)
-20 °C to 60 °C
8% to 80% (non-condensing)
5% to 85% (non-condensing)
48
K5903058 /11 Nio 2MP LED Display
Important information
Operating pressure Storage pressure
70 kPa minimum 50 to 106 kPa
6.9 Open source license information
Open source license information
This product contains software components released under an Open Source
license. You acknowledge living up to the conditions of each separate Open
Source Software license.
A list of the Open Source Software components used is available in the
applicable EULA, through the “My Barco” section of the Barco website or
through other (online) means.
Copyright on each Open Source Software component belongs to the respective
initial copyright holder, each additional contributor and/or their respective
assignee(s), as may be identified in the respective Open Source Software
documentation, source code, README file, or otherwise. You shall not remove or
obscure or otherwise alter the respective copyrights.
EACH SEPARATE OPEN SOURCE SOFTWARE COMPONENT AND ANY RELATED DOCUMENTATION ARE
PROVIDED “AS IS” WITHOUT EXPRESS OR IMPLIED WARRANTY INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. IN NO EVENT SHALL THE COPYRIGHTHOLDER OR ANY OTHER
CONTRIBUTOR BE LIABLE FOR DIRECT, INCIDENTAL, SPECIAL, EXEMPLARY OR
CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES,
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY. MORE INFORMATION/DETAILS IS TO
BE FOUND IN EACH SPECIFIC OPEN SOURCE LICENSE.
With respect to GPL, LGPL or similar licenses with regard to corresponding
source code access and automatic license terms applicability:
· You acknowledge living up to the conditions of each such specific applicable
Open Source Software license. You are responsible for your own additions,
changes or modifications without any recourse or claim towards Barco
whatsoever. You further acknowledge that any such additions, changes or
modifications may impair the ability of Barco at Barco’s sole discretion –
to continue to provide service, warranties, software updates, fixes,
maintenance, access or such similar abilities, without any recourse or claim
towards Barco whatsoever.
· Barco offers to provide the corresponding source code, and shall make the
corresponding source code available to you via email or download link, except
where the applicable license entitles you to require Barco to provide you the
corresponding source code on a tangible medium, in which case Barco will
charge you for the actual costs of performing such distribution, such as the
cost of media, shipping and handling. You may exercise this option upon
written request to Barco N.V, attn. legal department, Beneluxpark 21, 8500
Kortrijk (Belgium). This offer is valid for a period of three (3) years from
the date of the distribution of this product by Barco.
K5903058 /11 Nio 2MP LED Display
49
Important information
50
K5903058 /11 Nio 2MP LED Display
Troubleshooting
7
K5903058 /11 Nio 2MP LED Display
51
Troubleshooting
7.1 Troubleshooting
General
If you experience trouble with the LCD display, refer to the following
troubleshooting. If the problem persists, please contact your local dealer or
our service center.
Problem: No image appears on the screen
· Push the standby button. · Check if all I/O and power connectors are
correctly connected as described in the “installation” section. · Make sure
the pins of the connectors are not crooked or broken.
Problem: Partial image or incorrectly displayed image
· Check to see if the resolution of your computer is higher than the
resolution of the display. · Re-configure the resolution of your computer to
make it less than or equal to the native resolution (1600 x
1200)
7.2 Warning signals
General
Sometimes you may see warning messages for this display. This means that the
display cannot correctly receive the signal form the computer graphics card.
Problem: No signal
This message means that the display has been powered on but it cannot receive
any signal from the computer graphics card. Check all the power switches,
power cables, and video cable.
Problem: Out of range
This message means that the signal of the computer graphics card is not
compatible with the display. When the signal is not included in the
compatibility mode we have listed in the appendices of this manual, the
display will show this message.
52
K5903058 /11 Nio 2MP LED Display
Barco NV President Kennedypark 35 8500 Kortrijk Belgium
K5903058 /11 | 2021-12-20 www.barco.com
References
- Loading...
- Inspired sight and sharing solutions - Barco
- Patents - Barco
- Support - Barco
- Medical display controllers - Barco
- QAWeb Enterprise - Barco
- Support - Barco
- MediCal QAWeb - Product support - Barco
- QAWeb Enterprise - Product support - Barco
- Report a Security Vulnerability / Incident - Barco
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>