TOWILD ALC-01 Bike Lights User Manual
- June 9, 2024
- TOWILD
Table of Contents
ALC-01 Bike Lights
Product Information
- Product Name: Unknown
- Manufacturer: Lian Cheng Fa Optoelectronic Intelligence Industrial Park
- Address: Bao ‘an District, Shenzhen, Guangdong Province, China
- Product Type: Remote-control device for a headlight or handlebar accessory
Product Usage Instructions
- Ensure that the remote control device is within range of the headlight or handlebar accessory that it is paired with.
- To pair the remote control, press and hold the button for no more than 5 seconds. If the pairing process fails, try holding the remote control closer to the headlight or handlebar accessory.
- If the remote control does not respond when you press the button, you may need to replace the battery.
- The remote control can be attached to the handlebar with a replaceable strap.
- To turn on the headlight or handlebar accessory, press and hold the button for 0.5 seconds in standby mode. In intelligent mode, click to change gears.
- To turn off the headlight or handlebar accessory, press and hold the button for 0.8 seconds.
Note: It is recommended to avoid pressing and holding the button for more than 5 seconds during the pairing process. If it takes longer than this to pair, move the remote control closer to the accessory. If the remote control does not function after pairing, replace the battery.
Fixed to the handlebars by an o-ring strap, contain a replaceable CR1632 button battery.
PAIRED WITH THE REMOTE CONTROL
When the light is turned on, press and hold the light button for 3 seconds to
enter the pairing state, while the main light flashes. At this point the
button indicator light is always red, in the state of the remote control long
press any one of the keys until the pair of lights out, the match was
successful.
Note: during the matching process, the long press of the remote control
key is not more than 5s. If the long press time is long, please put the remote
control near the riding light. if it still does not match, please check the
remote control keys, the remote control lights up, if there is no possible
need to replace the remote control battery.
- Click switch alert, lighting mode. Long press 0.5 seconds to switch intelligent, manual mode
- Long press 0.5 seconds to start, long press 0.8 seconds to shut down. Click to shift gears. for a key very bright switch, long
- press into the highest brightness, release is back to the last gear.
www.wild-fires.com
Shenzhen Wildfres Outdoor Products Co.,Ltd
Contact us: TOWILD@wild-fires.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>