WINGS CS400 Center Stage 400 User Manual

WINGS CS400 Center Stage 400 User Manual

INTRODUCTION

Welcome to the Wings Portable Device Generation with the all new Wings Center Stage 400, We hope you are as excited os us to feel and flaunt your latest Sound gear. But before you dive right in, we strongly recommend going through this user manual thoroughly as it contains important technical information to ensure you have a seamless oudio experience with us. Once you are done reading the manual. We are sure you will be all set to.

WHAT’S IN THE BOX

lx User Manual 1 x Warrant/ Card 1 x AUX Coble

PRODUCT LAYOUT

PRODUCT LAYOUT

1. Mode “M” Button
2. ‘+’ Button
4. Ploy/Pause Button
5. Power ON/OFF Switch
6. AUX input 7. USB Port
8. Type-C Chorging Pod
9. Micro SO Cord Slot

HOW TO PAIR -:`

Pioase make TWO toe the device b holy powered before using tho product.
Stop 1: Switch ON the device by switcNng the power ON/ OFF switch.
Stop 2: You MI hoer o prompt. By default, the device wit outomancolly enter the eluetooth poking mode.
Step 3: Switch ON the Bleetooth on your poking device end Search for Corder Stage 400 in tho filuatooth mono.
Stop 4: Select Center Stage 400 from the list of found devices.
Step 5: After svccosshA poking, you 41 hoer o prompt indicceing that the device is paired successhily.
Nagt: When the Soundbor Is not connected to ony device in Blvetooth Mode, then the Soundben evil tom off eviornelicolly after 10 mini/Ms.

MUSIC CONTROLS

Stream music from SD card or USB flash drive:
Step 1: Turn ON the device. Step 2: Insert the micro-SD cord or USB drive, preloaded with songs, into the device’s SD cord slot or USB flash drive slot; correspondingly, you will hear a voice prompt for “USB mode” or •micro-SD card mode”, respectively. Step 3: The device will automatically start playing songs from the micro SD Card or USB flash.
Listening to FM radio Step 1: Turn ON the device. Step 2: Insert the Type-C end of the charging cable into the charging port, and leave the other end open. The charging cable serves os on FM antenna while in FM Radio mode.
Step 3: Short press key “M” to toggle to FM radio mode, and you will hear the voice prompt “The Radio Mode.”
– To Auto-Scan the stations, long press the (Play/pause) key for 2-3 seconds. – It will take o few minutes to seorch oll the stations. Once all the stations are scanned, they automatically register in the device.

CHARGING THE DEVICE DD

Battery When the battery is low, the Center Stage 400 will give a low battery ringtone, and after some time, the device will turn off automatically.

Charging up

Plug the Type-C end of the charging cable into the charging port. Plug the other end into o USB port of your computer or any charger (the Charger should not be more than 5V capacity). The charging LED will illuminate, The red light indicates that the device is being charged. Once the device is fully charged, the LED light will turn OFF.

BUTTON FUNCTION

CALLING FUNCTION

TROUBLESHOOTING

1. Some terminal music players are without on automatic switching play function. In this case, a ‘pop’ noise may be heord between songs. 2. If you cannot wirelessly connect to your mobile device. Try
2. removing the Speaker from your mobile device’s saved devices and re-connect as instructed above.
3. The sound performance may also be affected when there is a weak connection between the mobile device and the speaker. To improve connection, bring the mobile device closer to the speaker or remove any obstacles between the two devices.
4. The sound performance may also be affected if the speaker’s battery power level is low. Please make sure the speaker is fully charged to improve this issue.

Note: • Charge the speaker fully before first use. • The charging time depends on the battery’s existing charged levels and the USB adaptor’s specifications. • The LED indicator turns off automatically (during charging) when the battery is fully charged. • The speaker’s usage time depends on the charge in the battery, mode, volume level, etc.

TECHNICAL SPECIFICATIONS

SAFETY AND MAINTENANCE 9

Please reod below suggestions in order to help prolong the product fifespon and clearly understand the warranty clauses: • Keep the product dry, do not put it in humid conditions to avoid short circuit

• Do not expose it to the peak sun or high heat for extended period as this will shorten the lifespon of electronic components, damage battery and deform some plastic parts
• Do not put it in cold circumstances to avoid damage to PCB
• Do not attempt to dismantle the product, as it may be unsafe especially for non•professionols.
• Do not use Chemical products or detergent. Oily liquids to clean the item
• Do not scratch the surface with sharp items to ovoid damaging the case and appearance.

Note: Any damage to the product that is not manufacturing a defect will lead to the warranty being rendered null and void; therefore, please take utmost core of your product.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>