vetus HDS12B 12V-24 V Washer System Instruction Manual
- June 9, 2024
- vetus
Table of Contents
vetus HDS12B 12V-24 V Washer System
Product Information
The HDS12B, HDS24B, and HDSXTB are 12/24V spray system units designed for use in pressurised water systems. These units come with one washer head, but an expansion kit is available to add a second washer head. The nozzle is adjustable, and a needle can be inserted to adjust the spray angle. The electrical circuit requires wire with a minimum core cross-section of 1.5-mm2 (AWG 16), and a 2.5 Amp fuse must be fitted in the plus (+) circuit.
Product Usage Instructions
- Drill a 13 mm (0.51-inch) diameter hole where you want to fit the washer head.
- Fit the washer nozzle with supplied nut and washers. The washer nozzle also serves as the hull fitting.
- Connect the water supply to the pressurised water system and connect the spray system as shown in the diagram.
- For the electrical circuit, use wire with a minimum core cross-section of 1.5-mm2 (AWG 16). In the plus (+) circuit, fit a 2.5 Amp fuse.
- If you want to add a second washer head, use the expansion kit available for purchase.
- To adjust the spray angle, insert a needle into the nozzle carefully to prevent damage to it.
Drill a 13 mm (0.51”) diameter hole at the place where you want to fit the washer head. N.B. The nozzles are adjustable. Fit the washer nozzle with nut and washers supplied. The washer nozzles also serves as the hull fitting. Connect the washer system as shown in the diagram. Connect the water supply to the pressurised water system. For the electrical circuit, use wire with a minimum core crosssection of 1.5‑mm2 (AWG 16). In the plus (+) circuit, fit a 2.5 Amp fuse. A kit for fitting a second washer nozzle to the installation is available. Install the nozzles (2 per washer head) To adjust the spray angle, insert a needle into the nozzle. Take Care! Do this carefully to prevent damage to the nozzle.
Connection diagram
- Washer head
- Hose
- T-piece
- Hose connector
- Magnetic valve
- Water supply
- Fuse
- Switch
FOKKERSTRAAT 571 – 3125 BD SCHIEDAM – HOLLAND TEL.: +31 (0)88 4884700 – sales@vetus.nl – www.vetus.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>