SodaStream Power Sparkling Water Maker User Guide

: June 9, 2024
: Sodastream

Table of Contents

Power Sparkling Water Maker
OVERVIEW
SYSTEM
SET UP
SODASTREAM LIMITED WARRANTY
Documents / Resources

Power™ Sparkling Water Maker
USER GUIDE

Power Sparkling Water Maker

For your safety, please read this User Guide before using the Sparkling Water Maker.
Save these instructions and provide them to any subsequent users.
For more details and information regarding our Sparkling Water Makers, including how to use and troubleshooting guide, visit our support page at www.sodastream.com.

USER LICENSE
FOR ONE SODASTREAM® CYLINDER
NOT FOR SALE
PROPERTY OF SODA-CLUB (CO2) GMBH OR ITS AFFILIATES PROVIDED UNDER LICENSE
This is a legally binding document between Soda-Club (CO2) GmbH or its affiliates (“Soda Stream”) and the consumer regarding the right to use a Soda Stream CO2 Cylinder
(the “Cylinder”).
To protect users’ safety and health, various directives and regulations govern and regulate the use, refilling, maintenance, retesting and repair of the Cylinder. Soda Stream possesses the legally required knowledge and expertise to be responsible for strict legal compliance. This can only be guaranteed if the Cylinder is maintained, examined, retested and refilled by it. Thus, the Cylinder remains the property of Soda Stream and is provided under License.

When empty, please return the Cylinder to either Soda Stream or an authorised Soda Stream distributor in exchange for a full Cylinder, for the price of the gas refill only. This License will continue to bind the use of each subsequent Cylinder.
Refilling an empty Cylinder by third parties could be risky. Unauthorized refilling may violate the law and infringes Soda Stream’s rights. Soda Stream only warrants the safety of Cylinders refilled by it, bearing a Soda-Club/Soda Stream tamper proof valve seal.
If you return the Cylinder to Soda Stream or an authorised Soda Stream distributor without exchanging it for a full one, you will be entitled to a return fee of 2 USD or local equivalent.
The Cylinder, together with this User License, may be transferred to a third party provided the third party agrees to be bound by the conditions and ownership rights expressed herein. Possession of this User License proves the right of its holder to use one Cylinder under the terms herein.

The laws of Switzerland govern this License.
For questions, please contact Soda Stream International BV, Dongenseweg 200, 5047 SH Tilburg, The Netherlands.

OVERVIEW

SodaStream Power Sparkling Water Maker - OVERVIEW

SYSTEM

Compatible only with the following Soda Stream® Plastic Carbonating Bottles².

SodaStream Power Sparkling Water Maker - SYSTEM

¹60 L Soda Stream CO2 Cylinder (under license) makes up to 60 L of sparkling water depending on the level of carbonation and type of Sparkling Water Maker.
²Actual shape of Plastic Carbonating Bottle may differ.

SET UP

INSTALLING THE CO₂ CYLINDER

Place the Soda Stream® Power™ Sparkling Water Maker on a ﬂat sturdy surface and remove the back cover.
Remove seal and cap from the Soda Stream CO2 Cylinder.
WARNING! Never insert or replace the CO2 Cylinder while a Plastic Carbonating Bottle is installed in the Sparkling Water Maker. This can cause the Plastic Carbonating Bottle to be ejected or burst. Tilt the Sparkling Water Maker forward and insert the CO2 Cylinder in the back of the Sparkling Water Maker.
Gently raise the CO2 Cylinder and tighten by turning to the right until it is ﬁrmly held in place.
WARNING! Hand-tighten only. DO NOT use tools; this can damage the Sparkling Water Maker or CO2 Cylinder. This may result in an uncontrolled ﬂow of CO2 gas, causing the
Plastic Carbonating Bottle to burst and result in personal injury or property damage.
Connect the power cord to your Sparkling Water Maker.
Run the cord through the slots in the base. Insert the plug into the wall outlet. The buttons will light up. Only use an original Soda Stream power adapter.
Reinstall the back cover. Now you are ready to create the bubbles.

SODASTREAM CO2 SCREW SYSTEM CYLINDER
Please note that the Soda Stream® Power™ is compatible with the Soda Stream CO2 Screw System Cylinder and is NOT compatible with the Soda Stream Quick Connect Cylinder.

COMPATIBLE SODASTREAM CO2 QUICK CONNECT CYLINDER| NON-COMPATIBLE CO2 SCREW SYSTEM CYLINDER
---|---
SodaStream Power Sparkling Water Maker - SYSTEM CYLINDER
1 Use Only Soda Stream CO2 Screw System Cylinder|

CREATE THE BUBBLES

Fill the Plastic Carbonating Bottle with cold water up to the ﬁll line.
WARNING! Do not carbonate anything other than water. Other liquids can contaminate and clog internal parts, potentially resulting in excessive pressure, bottle failure during carbonation and serious injury. Never carbonate after favouring has been added. Note: when inserted correctly, there is a small gap between the bottom of the Carbonating Bottle and the base. Do not carbonate if the Carbonating Bottle is resting on the base, or water will splash out.
To insert the Plastic Carbonating Bottle, make sure that the Carbonating Bottle rest is angled forward. Please make sure you do not pull the carbonating tube. WARNING! Never use a Sparkling Water Maker with a broken carbonating tube. This can cause excessive pressure, bottle failure and serious injury. Insert the Plastic Carbonating Bottle neck into the Snap-Lock. Push the Plastic Carbonating Bottle up and back.
The Snap-Lock will hold the Plastic Carbonating Bottle.
The carbonating buttons will light up when the Carbonating Bottle is attached. If the Sparkling Water Maker is not used for 60 seconds, the lights will turn off. The lights will come on when any button is pressed.
Carbonate, press as follows to get the carbonation level of your choice:
• For 1L Carbonating Bottle: Left button (one drop) for light ﬁzz; Middle button (two drops) for medium ﬁzz; Right button (three drops) for strong ﬁzz.
• For 0.5L Carbonating Bottle: Left button (one drop) for medium ﬁzz;
Middle button (two drops) for strong ﬁzz.
The button will ﬂash indicating that it is carbonating. Once the LED stops ﬂashing, carbonation is complete. Pressing any button during carbonation will stop the carbonation process. Lights will remain on for a further 30 seconds or until the carbonating bottle is removed. You may carbonate again twice more without removing the carbonating bottle, after which the buttons will be deactivated. The buttons are reactivated when the carbonating bottle is removed and reinserted.
Note: You may see small pieces of ice appear in the water during carbonation of very cold water. Any ice created will simply melt.
When the desired level of carbonation is achieved, gently pull the Plastic Carbonating Bottle towards you until it reaches its fully forward position. This will release the pressure in the Plastic Carbonating Bottle and allow the Plastic Carbonating Bottle to be released from the Snap-Lock.
WARNING! Do not remove Plastic Carbonating Bottle until after hearing the sound of excess CO2 being released. Never force the Plastic Carbonating Bottle out of the Snap-Lock. Always allow the Sparkling Water Maker to release the Plastic Carbonating Bottle. If the Plastic Carbonating Bottle does not immediately release from the Snap-Lock wait a few moments. If it still does not release, then push the Plastic Carbonating Bottle back into the vertical position and gently pull it towards you again. Attempting to remove the Plastic Carbonating
Bottle while it is still pressurized can cause uncontrolled ejection of the Plastic Carbonating Bottle and may result in serious injury.

CARE
SPARKLING WATER MAKER CARE

Never use abrasive cleaners or sharp tools to clean. If needed, use a mild liquid dish soap and a soft damp cloth to gently clean.
Wipe spills to keep base dry.
Do not place in water or wash in a dishwasher, doing so will seriously damage your Sparkling Water Maker.

CARBONATING BOTTLE CARE

For Plastic Carbonating Bottles which are not “dishwasher safe”, to clean, rinse Plastic Carbonating Bottles with cold or lukewarm water.
WARNING! Do not expose to heat above 50°C. Never wash or rinse in hot water. Do not wash in dishwasher.
For “dishwasher safe” Plastic Carbonating Bottles, to clean, either wash in dishwasher or rinse Plastic Carbonating Bottles with cold or lukewarm water.
WARNING! Do not expose to heat above 70°C.

FOR YOUR SAFETY
SAVE THESE INSTRUCTIONS AND PROVIDE THEM TO ANY SUBSEQUENT USERS.
WARNING! Before using the Sparkling Water Maker, to reduce risk of personal injury and damage to your product, please read this important safety information.
Before allowing anyone to use your Sparkling Water Maker, please be sure they understand how to do so safely. Any servicing or repair should be performed by a SodaStream-authorised service representative.
The Sparkling Water Maker is only intended for use by people over the age of 12. People with reduced physical or mental capabilities should only use the product if they are supervised by an adult responsible for their safety and after they have been given instruction concerning the safe use of the product.
TO REDUCE THE RISK OF EITHER SERIOUS INJURY OR DAMAGE TO THE SPARKLING WATER MAKER DURING CARBONATION:

Only use your Sparkling Water Maker in its upright position, on a ﬂat, stable surface.
Do not place your Sparkling Water Maker on a hot surface (e.g. kitchen oven/stove) and never use it close to a ﬂame or leave in direct sunlight.
Carbonate water only.
Do not add ﬂavour before carbonation. Other liquids (except water) can contaminate and clog internal parts, potentially resulting in excessive pressure and bottle failure during carbonation.
Do not use the machine if the Plastic carbonating tube is broken or missing.
Check that your Plastic Carbonating Bottle is properly connected before carbonating.
Do not move your Sparkling Water Maker or remove the Plastic Carbonating Bottle during carbonation.
Do not carbonate an empty Plastic Carbonating Bottle.

CARBON DIOXIDE CO2 CYLINDER
To reduce the risk of a CO2 leak, personal injury and property damage:

Do not insert a CO2 Cylinder into the Sparkling Water Maker when a Plastic Carbonating Bottle is installed.
Do not use if damaged. Inspect the CO2 Cylinder and CO2 Cylinder valve prior to use for dents, punctures, or other damage. If damaged, contact a SodaStream-authorised service representative.
Do not tamper with the CO2 Cylinder in any way, including puncturing, incinerating or removing the valve.
Do not expose the CO2 Cylinder to heat above 50°C. Protect from sunlight. Store in a well-ventilated area.
Do not remove a CO2 Cylinder from the Sparkling Water Maker when it is being operated.
Do not handle or remove a CO2 Cylinder while it is discharging CO2.
In the event of a CO2 leak, ventilate the area, breathe fresh air and if feeling unwell seek immediate medical attention.

PLASTIC CARBONATING BOTTLE
To reduce the risk of bottle failure which can result in personal injury and property damage:

For Plastic Carbonating Bottles not marked as “dishwasher safe”, do not expose to heat above 50°C. Never wash or rinse in hot water. Do not wash in dishwasher.
For “dishwasher safe” Plastic Carbonating Bottles, do not expose to heat above 70°C.
Do not place the Plastic Carbonating Bottle next to a heat source such as your kitchen oven/stove.
Do not leave the Plastic Carbonating Bottle in your car.
Do not place the Plastic Carbonating Bottle in the freezer or in extreme cold below 1°C.
Do not use the Plastic Carbonating Bottle if damaged, deformed, changes in shape, scratched, worn, or discolored.
Do not use a Plastic Carbonating Bottle after its expiration date.
Only carbonate with Plastic Carbonating Bottles speciﬁcally designed to work with this Sparkling Water Maker, as shown on page 4 above.

ELECTRICAL APPLIANCES:
Only use the power adapter and power lead supplied with the Sparkling Water Maker. Using a different power adapter or lead may damage the Sparkling Water Maker and the power adapter. If the power adapter (including the power lead and plug) is damaged, contact your local Soda Stream Customer Service for a replacement.
To reduce the risk of ﬁre, electric shock and personal injury:

Do not place the cord, plug or Sparkling Water Maker in water or in any liquid;
Do not operate the Sparkling Water Maker with a damaged cord or plug;
Do not let the cord hang over the edge of the table or counter or touch a hot surface.
Do not use outdoors.

BOTTLE WARNING ICONS:

SodaStream Power Sparkling Water Maker - WARNING ICONS

FOR DISHWASHER-SAFE BOTTLES

|
---|---
Never expose to temperatures above 158°F / 70°C or below 34°F / 1°C| Dishwasher safe

SODASTREAM LIMITED WARRANTY

SODASTREAM SPARKLING WATER MAKERS
Great care has been taken to ensure that your Sparkling Water Maker was delivered to you in good condition. Soda Stream warrants, subject to the terms and conditions set forth in this limited warranty, that your Sparkling Water Maker will be free of defects in materials and workmanship under normal home use for 2 (two) years following the date of purchase. It is recommended that you register your Sparkling Water Maker online by visiting www.sodastream.com and completing the product registration form available on the website.
If your Sparkling Water Maker malfunctions within the warranty period, and we determine the problem is due to faulty workmanship or materials, Soda Stream will repair or replace it free of charge at Soda Stream’s discretion within the limitations set out in this warranty. Soda Stream may replace your Sparkling Water Maker with a reconditioned Sparkling Water Maker, or an equivalent one if the model you purchased is no longer available. No refunds shall be given. This limited warranty is available to consumers who purchased the Sparkling Water Maker for personal, family or household use.
This Warranty DOES NOT Cover Damages to Sparkling Water Maker Resulting From:

Abuse, misuse, alteration of the Sparkling Water Maker, or commercial use.
Carbonating liquids other than water.
Normal wear and tear (e.g. discolouration).
Product malfunctions that were a result, in whole or in part, by alteration, disassembly, or repair of the Sparkling Water Maker by a servicer other than an authorised Soda Stream Service Center.
The use of CO2 Cylinders or plastic carbonating bottles other than those approved by Soda Stream for use with your Sparkling Water Maker.
The use of the Sparkling Water Maker with an adapter connected to the Cylinder valve or to the Sparkling Water Maker.
The use of the Sparkling Water Maker with a non-Soda Stream power adapter and/or power lead.
The use of an expired Plastic Carbonating Bottle.
Accident, shipment or anything other than normal household use.

This warranty DOES NOT cover the Plastic Carbonating Bottles and CO2 Cylinders.
Soda Stream is not liable for incidental or consequential damages. The consumer’s sole and exclusive remedy shall be repair or replacement according to the terms and conditions of this warranty. Some local laws do not allow the exclusion or limitation of these damages, so these exclusions may not apply to you. To the extent that this warranty is inconsistent with local law, this warranty shall be deemed modiﬁed to be consistent with such local law.
You may also have other rights, which vary in accordance with local laws. The beneﬁts given to the consumer by this warranty are in addition to other rights and remedies that may be afforded to the consumer by law in relation to this Sparkling Water Maker.
TO OBTAIN WARRANTY SERVICE FOR YOUR SPARKLING WATER MAKER
If your Sparkling Water Maker is in need of warranty service, please contact your local Soda Stream Customer Service by visiting www.sodastream.com. A Soda Stream representative will give you speciﬁc instructions on how to arrange for the shipment of your Sparkling Water Maker, at your expense, to one of our authorised service centres. Only Soda Stream, or its agents, are authorised to provide warranty repairs or service to your Sparkling Water Maker.
NON-WARRANTY SERVICE
If Soda Stream or its authorised agents determine that the malfunction or damage to your Sparkling Water Maker is not covered by the warranty, Soda Stream will repair the Sparkling Water Maker only upon payment of the determined repair charge.

FOR AUSTRALIAN RESIDENCE
Our Sparkling Water Maker comes with guarantees that cannot be excluded under the Australian Consumer Law. Australian residence are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. Australian residence are also entitled to have the Sparkling Water Maker repaired or replaced if it fails to be of acceptable quality and the failure does not amount to a major failure. The issuer of this warranty is Soda Stream Australia Pty Ltd., 21 Henderson Road, Knoxﬁeld, Victoria 3180, Australia, Telephone No.: 1300 763 278, email: sales@sodastream.com.au. Should the Sparkling Water Maker suffer a major failure or other reasonably foreseeable damage, contact us at the above phone number, email or mailing address to present your claim for the warranty. If Australian residence are returning the Sparkling Water Maker in accordance with their rights under the Australian Consumer Law: (a) the Sparkling Water Maker does not need to be in its original packaging to be returned, however you must ensure that the Sparkling Water Maker is adequately protected for transit; and (b) Australian residence will be required to pay any delivery costs when returning items to us, however Soda Stream Australia Pty Ltd., will refund reasonable delivery costs if they are entitled to a remedy under the Australian Consumer Law (subject to you providing proof of these costs). The beneﬁts to the Australian consumer given by this warranty are in addition to other rights and remedies that may be afforded to the Australian consumer by law in relation the Sparkling Water Maker.

SODASTREAM CO2 CYLINDERS
Your Sparkling Water Maker has been designed to operate with a Soda Stream CO2 Cylinder. The use of other CO2 Cylinders is not recommended as they may not be compatible with a Soda Stream Sparkling Water Maker. Damages resulting from the use of a cylinder other than those approved by Soda Stream or use of the Soda Stream CO2 Cylinder not in accordance with the instructions included in this User Guide are not covered by the warranty.
The Soda Stream CO2 Cylinder is provided to you under license. The license allows you to exchange your empty Cylinder for a full one for the price of the CO2 only.
SODASTREAM PLASTIC CARBONATING BOTTLES
Your Sparkling Water Maker has been designed to operate with a compatible Soda Stream Plastic Carbonating Bottle. Damages resulting from the use of a carbonating bottle other than a compatible Soda Stream Plastic Carbonating Bottle or use of Plastic Carbonating Bottles not in accordance with the instructions included in this User Guide are not covered by the warranty. Soda Stream Plastic Carbonating Bottles are available from authorised Soda Stream retailers.
TERMS AND CONDITIONS
Any and all claims, complaints, demands for judgment or legal actions brought hereunder relating in any way to your Sparkling Water Maker, Plastic Carbonating Bottle or CO2 Cylinder shall be governed by, and construed in accordance with, the local laws of the country in which the Soda Stream Sparkling Water Maker was purchased.
PRODUCT DISPOSAL INSTRUCTIONS
Please recycle your expired and damaged Carbonating Bottles in accordance with local recycling laws. The packaging in which Soda Stream products are supplied is made of recyclable materials. Contact your local authority for further information on recycling.
MACHINE RATING INFORMATION
Maximum Working Pressure: 116 psi/8 bar
Maximum Allowed Operating Temperature: 40°C
Minimum Allowed Operating Temperature: 5°C. This will insure that during carbonation, the water vapour going through the valves of the machine will not freeze and block the gas path.

ELECTRICAL:
Input: 24V DC
Max Current: 0.5 Amp
Max Power Consumption: 12 W
Only use the power adapter and power lead supplied with the Power™ Sparkling Water Maker. Using a different power adapter or lead may cause damage to the Sparkling Water Maker and to the power adapter.
If the power adapter (including the power lead and plug) becomes damaged, contact your local Soda Stream
Customer Service to obtain a replacement.
Soda Stream is a registered trademark of Soda-Club (CO2) GmbH or its afﬁliates.

AUSTRALIA
Soda Stream Australia Pty Limited,
21 Henderson Road, Knoxﬁeld VIC 3180,
Tel: 1300 763 278
sales-australia@sodastream.com
www.sodastream.com.au| NEW ZEALAND
Soda Stream New Zealand Ltd.
CDB 4-6 Lovell Court Albany 0632
Tel: 0800 232 633
fizzy@sodastream.co.nz
www.sodastream.co.nz
---|---
SOUTH AFRICA
Soda Stream (SA) (PTY) Ltd
R21 Corporate Park,
48 Sovereign Drive
Irene, Centurion, 0178
Tel: (012) 345 9220
Toll free: 0800-00-22-91
www.sodastream.co.za| UK
Soda Stream Worldwide Trading
Company
The Limes-12 Dunstable Street
Ampthill, Bedfordshire
MK45 2GJ, United Kingdom
Tel: 0800 0858373
www.sodastream.co.uk
SINGAPORE
Komo Pte Ltd,
65 Ubi Road 1,
Oxley Bizhub #03-67
Singapore 408729
SparklingWater@Komoinc.com
www.sodastream.sg