sodastream E-Terra Automatic Sparkling Water Maker User Manual

: October 30, 2023
: Sodastream

Table of Contents

E-Terra Automatic Sparkling Water Maker
GET TO KNOW YOUR E-TERRATM/MC
ELECTRIC POWER CONNECT
QUICK CONNECT CO² CYLINDER
USER LICENSE
SET UP
CREATE THE BUBBLES
CARE
FOR YOUR SAFETY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

E-TERRA TM/MC
AUTOMATIC SPARKLING WATER MAKER
REGISTER NOW!
AND UPGRADE YOUR
SODASTREAM EXPERIENCE

E-Terra Automatic Sparkling Water Maker

scan or go to

SAY GOODBYE to single use plastic bottles
AND HELLO to a perfect carbonation experience

| | | |
---|---|---|---|---
Patented Quick Connect system| Dishwasher safe bottle| Bottle Snap & Lock unique technology| 3 carbonation levels| One-Touch electric technology

For your safety, please read the set up and safety instructions on pages 18 and 20 before using the Sparkling Water Maker. Save these instructions and provide them to any subsequent users.
For more details and information regarding our sparkling water makers, including how to use and troubleshooting guide, please go to support at SodaStream.com

GET TO KNOW YOUR E-TERRATM/MC

*Check for compatibility on the Bottle pack.

ELECTRIC POWER CONNECT

https://info.sodastream.com/redirect/ETerra_machine

PREFER A HOW TO VIDEO?
SIMPLY SCAN AND WATCH

Connect the pronged plug that ﬁts your local outlet to the power adapter.
Check the power cord placement at the base of the machine.
Look for the plug-in icon to insert the plug.
Make sure that the power cord is threaded through the slot.

QUICK CONNECT CO² CYLINDER

Remove seal and pull oﬀ the cap.
Pull open the back cover.
Raise the handle and insert the cylinder*, bottom ﬁrst.
Lower the handle for a quick connect.
Replace the back cover.
*Make sure the carbonating bottle is not connected to the Sparkling Water Maker before inserting the cylinder.
Insert the adapter into a power outlet. The lights will turn on for 7 seconds.

USER LICENSE

FOR ONE SODASTREAM QUICK CONNECT CYLINDER NOT FOR SALE PROPERTY OF SODASTREAM INDUSTRIES LTD. OR ITS AFFILIATES PROVIDED UNDER LICENSE AND PATENT PENDING
This is a legally binding document between SodaStream Industries Ltd. or its aﬃliates (“SodaStream”) and the consumer regarding the right to use a SodaStream CO2 Quick Connect Cylinder (the “Cylinder”).
The Cylinder is proprietary to SodaStream, patent pending and protected by other intellectual property rights. Further, to protect users’ safety and health, various directives and regulations govern and regulate the use, reﬁlling, maintenance, retesting and repair of the Cylinder. SodaStream possesses the legally required knowledge and expertise to be responsible for strict legal compliance that can only be guaranteed if the Cylinder is maintained, examined, retested and reﬁlled by it.
Thus, the Cylinder remains the property of Soda Stream and is provided under License.

When empty, please return the Cylinder to either Soda Stream or an authorized Soda Stream distributor in exchange for a full Cylinder, for the price of the gas reﬁll only. This License will continue to bind the use of each subsequent Cylinder.
Reﬁlling an empty Cylinder by third parties may infringe Soda Stream’s intellectual property rights, including patents and other proprietary rights, may be risky and may violate certain laws. SodaStream only warrants the safety of Cylinders reﬁlled by it, bearing a Soda Stream tamper proof valve seal. You may not remove or change any proprietary notice appearing on or accompanying the Cylinders.
If you return the Cylinder to Soda Stream or an authorized Soda Stream distributor, without exchanging it for a full one, you will be entitled to a return fee of 2$ or local equivalent.
The Cylinder, together with this User License, may be transferred to a third party provided the third party agrees to be bound by the conditions and ownership rights expressed herein. Possession of this User License proves the right of its holder to use one Cylinder under the terms herein.
For questions, please contact Soda Stream International BV, Dongenseweg 200, 5047 SH Tilburg, The Netherlands

SET UP

Please note that the Soda Stream®/MD E-TERR Aim is only compatible with the CO2 Quick Connect Cylinder and is NOT compatible with the SodaStream® CO2 Screw System Cylinder or other cylinders.

CONNECTING THE POWER ADAPTER
Connect the pronged plug that ﬁts your local outlet to the power adapter. Check the power cord placement at the base of the machine. Look for the plug- in icon to insert the plug. Make sure that the power cord is threaded through the slot.

INSTALLING THE CO2
QUICK CONNECT CYLINDER

Place the SodaStream® E-TERRA Sparkling Water
Maker on a ﬂat sturdy surface and remove the back cover.
Remove seal and cap from the SodaStream® CO2 Quick Connect Cylinder.
WARNING! Never insert or replace the CO2 Quick Connect Cylinder while a Plastic Carbonating Bottle is installed in the Sparkling Water Maker.
This can cause the Plastic Carbonating Bottle to be ejected or burst.
Raise pink cylinder handle. Insert the CO2 Quick Connect Cylinder in the back of the Sparkling Water Maker.
Lower the Pink Cylinder Handle..
Reinstall the back cover. Now you are ready to create the bubbles.
Insert the plug into the wall outlet. The buttons will light up. Only use an original SodaStream power adapter.

CREATE THE BUBBLES

COMPATIBLE WITH THE FOLLOWING ONLY:
Check for compatibility on the Bottle pack.

Fill the plastic carbonating bottle with cold water up to the ﬁll line.
WARNING! Do not carbonate anything other than water. Other liquids can contaminate and clog internal parts, potentially resulting in excessive pressure, bottle failure during carbonation and serious injury. Never carbonate after ﬂavoring has been added.
To insert the plastic carbonating bottle, make sure that the bottle rest is angled forward. Please make sure you do not pull the carbonating tube. WARNING! Never use a Sparkling Water Maker with a broken carbonating tube. This can cause excessive pressure, bottle failure and serious injury. Insert the bottle neck into the Snap-Lock system. Push the plastic carbonating bottle up and back. The Snap-Lock will hold the plastic carbonating bottle.
To carbonate, press as follows to get the desired carbonation level:
• For 1L Plastic Carbonating Bottle: left button (one bubble) for light ﬁzz; Middle button (two bubbles) for medium ﬁzz; Right button (three bubbles) for strong ﬁzz.
• For 0.5L Plastic Carbonating Bottle: Left button (one bubble) for medium ﬁzz; Middle button (two bubbles) for strong ﬁzz.
The button will ﬂash slowly indicating that it is carbonating and will ﬂash quickly when carbonation is complete. Pressing any button during carbonation will stop the carbonation process. When the desired level of carbonation is achieved, gently pull the Plastic Carbonating Bottle towards you until it reaches its fully forward position. This will release the pressure in the Plastic Carbonating Bottle and allow the Plastic Carbonating Bottle to be released from the Snap-Lock.
WARNING! Do not remove plastic carbonating bottle until after hearing the sound of excess CO2 being released. Never force the plastic carbonating bottle out of the Snap-Lock system. Always allow the Sparkling Water Maker to release the plastic carbonating bottle. If the plastic carbonating bottle does not immediately release from the Snap-Lock system wait a few moments. If it still does not release, then push the plastic carbonating bottle back into the vertical position and gently pull it towards you again.
Attempting to remove the plastic carbonating bottle while it is still pressurized can cause uncontrolled ejection of the plastic carbonating bottle and may result in serious injury.

Note: when inserted correctly, there is a small gap between the bottom of the Plastic Carbonating Bottle and the base. Do not carbonate if the Plastic Carbonating Bottle is resting on the base, or water will splash out.

CARE

SPARKLING WATER MAKER CARE

Never use abrasive cleaners or sharp tools to clean. If needed, use a mild liquid dish soap and a soft damp cloth to gently clean.
Wipe spills to keep base dry.
Do not place in water or wash in a dishwasher, doing so will seriously damage your Sparkling Water Maker.
PLASTIC CARBONATING BOTTLE
For plastic carbonating bottles which are not “dishwasher safe”, to clean, rinse
astic carbonating bottle with cold or lukewarm water. WARNING! Do not expose to heat above
50°C/120°F. Never wash or rinse in hot water. Do not wash in dishwasher.
For “dishwasher safe” plastic carbonating bottles, to clean, either wash in dishwasher or rinse
plastic carbonating bottle with cold or lukewarm water.
WARNING! Do not expose to heat above 70°C/158°F.

FOR YOUR SAFETY

SAVE THESE INSTRUCTIONS AND PROVIDE THEM TO ANY SUBSEQUENT USERS.
WARNING! Before using the Sparkling Water Maker, to reduce risk of personal injury and damage to your product, please read this important safety information.
Before allowing anyone to use your Sparkling Water Maker, please be sure they understand how to do so safely. Any servicing or repair should be performed by a SodaStream®-authorized service representative.
The Sparkling Water Maker is only intended for use by people over the age of 12. People with reduced physical or mental capabilities should only use the product if they are supervised by an adult responsible for their safety and after they have been given instruction concerning the safe use of the product.
TO REDUCE THE RISK OF EITHER SERIOUS INJURY OR DAMAGE TO THE SPARKLING WATER MAKER DURING CARBONATION:

Only use your Sparkling Water Maker in its upright position, on a ﬂat, stable surface.
Do not place your Sparkling Water Maker on a hot surface (e.g. kitchen oven/stove) and never use it close to a ﬂame or leave in direct sunlight.
Carbonate water only.
Do not add ﬂavor before carbonation. Other liquids (except water) can contaminate and clog internal parts, potentially resulting in excessive pressure and bottle failure during carbonation.
Do not use the Sparkling Water Maker if the carbonating tube is broken or missing.
Check that your plastic carbonating bottle is properly connected before carbonating.
Do not move your Sparkling Water Maker or remove the plastic carbonating bottle during carbonation.
Do not carbonate an empty plastic carbonating bottle.