sodastream COOL/JET User Guide

: June 8, 2024
: Sodastream

Table of Contents

COOL/JET
OVERVIEW
SET UP
FOR YOUR SAFETY
SODASTREAM LIMITED WARRANTY
Documents / Resources

COOL/JET
User Guide

COOL/JET

For your safety, please read this User Guide before using the Sparkling Water Maker.
Save these instructions and provide them to any subsequent users.
For more details and information regarding our Sparkling Water Makers, including how to use and troubleshooting guide, visit our support page at www.sodastream.com.

USER LICENSE
FOR ONE SODASTREAM® CYLINDER NOT FOR SALE
PROPERTY OF SODA-CLUB (CO2) GMBH OR ITS AFFILIATES PROVIDED UNDER LICENSE
This is a legally binding document between Soda-Club (CO2) GmbH or its affiliates (“SodaStream”) and the consumer regarding the right to use a SodaStream CO2 Cylinder (the “Cylinder”).
To protect users’ safety and health, various directives and regulations govern and regulate the use, refilling, maintenance, retesting and repair of the Cylinder. SodaStream possesses the legally required knowledge and expertise to be responsible for strict legal compliance. This can only be guaranteed if the Cylinder is maintained, examined, retested and refilled by it. Thus, the Cylinder remains the property of SodaStream and is provided under License.

When empty, please return the Cylinder to either SodaStream or an authorised SodaStream distributor in exchange for a full Cylinder, for the price of the gas refill only. This License will continue to bind the use of each subsequent Cylinder.
Refilling an empty Cylinder by third parties could be risky. Unauthorised refilling may violate the law and infringes SodaStream’s rights. SodaStream only warrants the safety of Cylinders refilled by it, bearing a Soda-Club/SodaStream tamper proof valve seal.
If you return the Cylinder to SodaStream or an authorised SodaStream distributor, without exchanging it for a full one, you will be entitled to a return fee of 2 USD or local equivalent.
The Cylinder, together with this User License, may be transferred to a third party provided the third party agrees to be bound by the conditions and ownership rights expressed herein. Possession of this User License proves the right of its holder to use one Cylinder under the terms herein.

The laws of Switzerland govern this License.
For questions, please contact SodaStream International BV, Dongenseweg 200, 5047 SH Tilburg, The Netherlands.

OVERVIEW

sodastream COOL JET - OVERVIEW

SYSTEM

Compatible only with the following SodaStream reusable Carbonating Bottles³

sodastream COOL JET - SYSTEM

¹ 60 L SodaStream® CO2 Cylinder (under license) makes up to 60 L of sparkling water depending on the level of carbonation and type of Sparkling Water Maker.
² 130 L SodaStream® CO2 Cylinder (under license) makes up to 130 L of sparkling water depending on the level of carbonation and type of Sparkling Water Maker. Only compatible with some versions of Jet™ machine.
³ Actual shape of bottle may differ.

SET UP

INSTALLING THE CO 2 CYLINDER

Place the SodaStream® Sparkling Water Maker on a ﬂat sturdy surface and remove the back cover.
Remove seal and cap from the SodaStream CO2 Cylinder.
WARNING! Never insert or replace the CO2 Cylinder while a Plastic Carbonating Bottle is installed in the Sparkling Water Maker. This can cause the Plastic Carbonating Bottle to be ejected or burst. Tilt the Sparkling Water Maker forward and insert the CO2 Cylinder in the back of the Sparkling Water Maker.
Gently raise the CO2 Cylinder and tighten by turning to the right until it is ﬁrmly held in place.
WARNING! Hand-tighten only. DO NOT use tools; this can damage the Sparkling Water Maker or CO2 Cylinder. This may result in an uncontrolled ﬂow of CO2 gas, causing the Plastic Carbonating Bottle to burst and result in personal injury or property damage.
Reinstall the back cover. Now you are ready to create the bubbles.

SODASTREAM CO 2 SCREW SYSTEM CYLINDER
Please note that the SodaStream® Jet™/Cool™ are compatible with the SodaStream CO2 Screw System Cylinder and is NOT compatible with the SodaStream Quick Connect Cylinder.

sodastream COOL JET - Figure 5

CREATE THE BUBBLES

Fill the Plastic Carbonating Bottle with cold water up to the ﬁll line.
WARNING! Do not carbonate anything other than water. Other liquids can contaminate and clog internal parts, potentially resulting in excessive pressure, bottle failure during carbonation and serious injury. Never carbonate after ﬂavouring has been added.
To insert the Carbonating Bottle, press the tilt lever and screw the Carbonating Bottle into the Sparkling Water Maker. Please make sure you do not pull the carbonating tube. WARNING! Never use a Sparkling Water Maker with a broken carbonating tube. This can cause excessive pressure, bottle failure and serious injury.
To carbonate, press the carbonating button in short 1 second presses; 3 presses for standard carbonation and 5 presses for strong carbonation. Note: You may see small pieces of ice appear in the water during carbonation of very cold water. Any ice created will simply melt.
When the desired level of carbonation is achieved, press on the tilt lever. This will release the pressure in the Plastic Carbonating Bottle. Unscrew the Carbonating Bottle to remove it from the Sparkling Water Maker. WARNING! Do not remove Plastic Carbonating Bottle until after hearing the sound of excess CO2 being released. Attempting to remove the Plastic Carbonating Bottle while it is still pressurized can cause uncontrolled ejection of the Plastic Carbonating Bottle and may result in serious injury.

CARE
SPARKLING WATER MAKER CARE

Never use abrasive cleaners or sharp tools to clean. If needed, use a mild liquid dish soap and a soft damp cloth to gently clean.
Wipe spills to keep base dry.
Do not place in water or wash in a dishwasher, doing so will seriously damage your Sparkling Water Maker.

CARBONATING BOTTLE CARE

For Plastic Carbonating Bottles which are not “dishwasher safe”, to clean, rinse Plastic Carbonating Bottles with cold or lukewarm water. WARNING! Do not expose to heat above 50°C. Never wash or rinse in hot water. Do not wash in dishwasher.
For “dishwasher safe” Plastic Carbonating Bottles, to clean, either wash in dishwasher or rinse Plastic Carbonating Bottles with cold or lukewarm water. WARNING! Do not expose to heat above 70°C.

FOR YOUR SAFETY

SAVE THESE INSTRUCTIONS AND PROVIDE THEM TO ANY SUBSEQUENT USERS.
WARNING! Before using the Sparkling Water Maker, to reduce risk of personal injury and damage to your product, please read this important safety information.
Before allowing anyone to use your Sparkling Water Maker, please be sure they understand how to do so safely. Any servicing or repair should be performed by a SodaStream-authorised service representative.
The Sparkling Water Maker is only intended for use by people over the age of 12. People with reduced physical or mental capabilities should only use the product if they are supervised by an adult responsible for their safety and after they have been given instruction concerning the safe use of the product.
TO REDUCE THE RISK OF EITHER SERIOUS INJURY OR DAMAGE TO THE SPARKLING WATER MAKER DURING CARBONATION:

Only use your Sparkling Water Maker in its upright position, on a ﬂat, stable surface.
Do not place your Sparkling Water Maker on a hot surface (e.g. kitchen oven/stove) and never use it close to a ﬂame or leave in direct sunlight.
Carbonate water only.
Do not add ﬂavour before carbonation. Other liquids (except water) can contaminate and clog internal parts, potentially resulting in excessive pressure and bottle failure during carbonation.
Do not use the machine if the Plastic carbonating tube is broken or missing.
Check that your Plastic Carbonating Bottle is properly connected before carbonating.
Do not move your Sparkling Water Maker or remove the Plastic Carbonating Bottle during carbonation.
Do not carbonate an empty Plastic Carbonating Bottle.

CARBON DIOXIDE CO2 CYLINDER
To reduce the risk of a CO2 leak, personal injury and property damage:

Do not insert a CO2 Cylinder into the Sparkling Water Maker when a Plastic Carbonating Bottle is installed.
Do not use if damaged. Inspect the CO2 Cylinder and CO2 Cylinder valve prior to use for dents, punctures, or other damage. If damaged, contact a SodaStream-authorised service representative.
Do not tamper with the CO2 Cylinder in any way, including puncturing, incinerating or removing the valve.
Do not expose the CO2 Cylinder to heat above 50°C. Protect from sunlight. Store in a well-ventilated area.
Do not remove a CO2 Cylinder from the Sparkling Water Maker when it is being operated.
Do not handle or remove a CO2 Cylinder while it is discharging CO2.
In the event of a CO2 leak, ventilate the area, breathe fresh air and if feeling unwell seek immediate medical attention.

PLASTIC CARBONATING BOTTLE
To reduce the risk of bottle failure which can result in personal injury and property damage:

For Plastic Carbonating Bottles not marked as “dishwasher safe”, do not expose to heat above 50°C. Never wash or rinse in hot water. Do not wash in dishwasher.
For “dishwasher safe” Plastic Carbonating Bottles, do not expose to heat above 70°C.
Do not place the Plastic Carbonating Bottle next to a heat source such as your kitchen oven/stove.
Do not leave the Plastic Carbonating Bottle in your car.
Do not place the Plastic Carbonating Bottle in the freezer or in extreme cold below 1°C.
Do not use the Plastic Carbonating Bottle if damaged, deformed, changes in shape, scratched, worn, or discoloured.
Do not use a Plastic Carbonating Bottle after its expiration date.
Only carbonate with Plastic Carbonating Bottles speciﬁcally designed to work with this Sparkling Water Maker, as shown on page 4 above.

BOTTLE WARNING ICONS:

sodastream COOL JET - Figure 10

FOR DISHWASHER-SAFE BOTTLES

sodastream COOL JET - Figure 11

SODASTREAM LIMITED WARRANTY

SODASTREAM SPARKLING WATER MAKERS
Great care has been taken to ensure that your Sparkling Water Maker was delivered to you in good condition. SodaStream warrants, subject to the terms and conditions set forth in this limited warranty, that your Sparkling Water Maker will be free of defects in materials and workmanship under normal home use for 2 (two) years following the date of purchase. It is recommended that you register your Sparkling Water Maker online by visiting www.sodastream.com and completing the product registration form available on the website.
If your Sparkling Water Maker malfunctions within the warranty period, and we determine the problem is due to faulty workmanship or materials, SodaStream will repair or replace it free of charge at SodaStream’s discretion within the limitations set out in this warranty. SodaStream may replace your Sparkling Water Maker with a reconditioned Sparkling Water Maker, or an equivalent one if the model you purchased is no longer available. No refunds shall be given. This limited warranty is available to consumers who purchased the Sparkling Water Maker for personal, family or household use.
This Warranty DOES NOT Cover Damages to Sparkling Water Maker Resulting From:

Abuse, misuse, alteration of the Sparkling Water Maker, or commercial use.
Carbonating liquids other than water.
Normal wear and tear (e.g. discolouration).
Product malfunctions that were a result, in whole or in part, by alteration, disassembly, or repair of the Sparkling Water Maker by a servicer other than an authorised SodaStream Service Center.
The use of CO2 Cylinders or plastic carbonating bottles other than those approved by SodaStream for use with your Sparkling Water Maker.
The use of the Sparkling Water Maker with an adapter connected to the Cylinder valve or to the Sparkling Water Maker.
The use of an expired Plastic Carbonating Bottle.
Accident, shipment or anything other than normal household use.

This warranty DOES NOT cover the Plastic Carbonating Bottles and CO2 Cylinders.
SodaStream is not liable for incidental or consequential damages. The consumer’s sole and exclusive remedy shall be repair or replacement according to the terms and conditions of this warranty. Some local laws do not allow the exclusion or limitation of these damages, so these exclusions may not apply to you. To the extent that this warranty is inconsistent with local law, this warranty shall be deemed modiﬁed to be consistent with such local law.
You may also have other rights, which vary in accordance with local laws. The beneﬁts given to the consumer by this warranty are in addition to other rights and remedies that may be afforded to the consumer by law in relation to this Sparkling Water Maker.
TO OBTAIN WARRANTY SERVICE FOR YOUR SPARKLING WATER MAKER
If your Sparkling Water Maker is in need of warranty service, please contact your local SodaStream Customer Service by visiting www.sodastream.com. A SodaStream representative will give you speciﬁc instructions on how to arrange for the shipment of your Sparkling Water Maker, at your expense, to one of our authorised service centres. Only SodaStream, or its agents, are authorised to provide warranty repairs or service to your Sparkling Water Maker.
NON-WARRANTY SERVICE
If SodaStream or its authorised agents determine that the malfunction or damage to your Sparkling Water Maker is not covered by the warranty, SodaStream will repair the Sparkling Water Maker only upon payment of the determined repair charge.
FOR AUSTRALIAN RESIDENCE
Our Sparkling Water Maker comes with guarantees that cannot be excluded under the Australian Consumer Law. Australian residence are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. Australian residence are also entitled to have the Sparkling Water Maker repaired or replaced if it fails to be of acceptable quality and the failure does not amount to a major failure. The issuer of this warranty is SodaStream Australia Pty Ltd., 21 Henderson Road, Knoxﬁeld, Victoria 3180, Australia, Telephone No.: 1300 763 278 , email: sales@sodastream.com.au. Should the Sparkling Water Maker suffer a major failure or other reasonably foreseeable damage, contact us at the above phone number, email or mailing address to present your claim for the warranty. If Australian residence are returning the Sparkling Water Maker in accordance with their rights under the Australian Consumer Law: (a) the Sparkling Water Maker does not need to be in its original packaging to be returned, however you must ensure that the Sparkling Water Maker is adequately protected for transit; and (b) Australian residence will be required to pay any delivery costs when returning items to us, however SodaStream Australia Pty Ltd., will refund reasonable delivery costs if they are entitled to a remedy under the Australian Consumer Law (subject to you providing proof of these costs). The beneﬁts to the Australian consumer given by this warranty are in addition to other rights and remedies that may be afforded to the Australian consumer by law in relation the Sparkling Water Maker.
SODASTREAM CO2 CYLINDERS
Your Sparkling Water Maker has been designed to operate with a SodaStream CO2 Cylinder. The use of other CO2 Cylinders is not recommended as they may not be compatible with a SodaStream Sparkling Water Maker. Damages resulting from the use of a cylinder other than those approved by SodaStream or use of the SodaStream CO2 Cylinder not in accordance with the instructions included in this User Guide are not covered by the warranty.
The SodaStream CO2 Cylinder is provided to you under license. The license allows you to exchange your empty Cylinder for a full one for the price of the CO2 only.
SODASTREAM PLASTIC CARBONATING BOTTLES
Your Sparkling Water Maker has been designed to operate with a compatible SodaStream Plastic Carbonating Bottle. Damages resulting from the use of a carbonating bottle other than a compatible SodaStream Plastic Carbonating Bottle or use of Plastic Carbonating Bottles not in accordance with the instructions included in this User Guide are not covered by the warranty. SodaStream Plastic Carbonating Bottles are available from authorised SodaStream retailers.
TERMS AND CONDITIONS
Any and all claims, complaints, demands for judgment or legal actions brought hereunder relating in any way to your Sparkling Water Maker, Plastic Carbonating Bottle or CO2 Cylinder shall be governed by, and construed in accordance with, the local laws of the country in which the SodaStream Sparkling Water Maker was purchased.
PRODUCT DISPOSAL INSTRUCTIONS
Please recycle your expired and damaged Carbonating Bottles in accordance with local recycling laws. The packaging in which SodaStream products are supplied is made of recyclable materials. Contact your local authority for further information on recycling.
MACHINE RATING INFORMATION
Maximum Working Pressure: 116 psi/8 bar
Maximum Allowed Operating Temperature: 40°C
Minimum Allowed Operating Temperature: 5°C. This will insure that during carbonation, the water vapour going through the valves of the machine will not freeze and block the gas path.
SodaStream is a registered trademark of Soda-Club (CO2) GmbH or its afﬁliates.

AUSTRALIA
SodaStream Australia Pty Limited,
21 Henderson Road, Knoxﬁeld VIC 3180,
Tel: 1300 763 278
sales-australia@sodastream.com
www.sodastream.com.au| NEW ZEALAND
SodaStream New Zealand Ltd.
CDB 4-6 Lovell Court Albany 0632
Tel: 0800 232 633
fizzy@sodastream.co.nz
www.sodastream.co.nz
---|---
SOUTH AFRICA
SodaStream (SA) (PTY) Ltd
R21 Corporate Park,
48 Sovereign Drive
Irene, Centurion, 0178
Tel: (012) 345 9220
Toll free: 0800-00-22-91
www.sodastream.co.za| UK
SodaStream Worldwide Trading Company
The Limes-12 Dunstable Street
Ampthill, Bedfordshire
MK45 2GJ, United Kingdom
Tel: 0800 0858373
www.sodastream.co.uk
SINGAPORE
Komo Pte Ltd,
65 Ubi Road 1,
Oxley Bizhub #03-67
Singapore 408729
SparklingWater@Komoinc.com
www.sodastream.sg