sodastream TERRA Sparkling Water Maker User Guide
- June 3, 2024
- Sodastream
Table of Contents
- sodastream TERRA Sparkling Water Maker
- ALL YOU NEED FOR A FRESH START
- GET TO KNOW YOUR TERRA™
- SNAP-LOCK SYSTEM
- FIZZING THE MAGIC MOMENT!
- USER LICENSE
- SET UP
- INSTALLING THE CO2 QUICK CONNECT CYLINDER
- CREATE THE BUBBLES
- CARE
- FOR BOTTLE WITH WARNING ICONS:
- SODASTREAM LIMITED WARRANTY
- NON-WARRANTY SERVICE
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
sodastream TERRA Sparkling Water Maker
WELCOME TO THE SPARKLING REVOLUTION!
Now you can bubble up your day and help Planet Earth have less waste and more
sparkle.
Your new sparkling water maker will turn any H2O into H2Wow with the push of a
button. Enjoy fresh sparkling water anytime, at the comfort of your home!
In just 3 minutes you’ll have your first homemade sparkly drink!
ALL YOU NEED FOR A FRESH START
SPARKLING WATER MAKER
1 LITRE PLASTIC CARBONATING BOTTLE
QUICK CONNECT CO2 CYLINDER*
GET TO KNOW YOUR TERRA™
COMPATIBLE WITH THE FOLLOWING ONLY
SodaStream reusable plastic carbonating bottles*
*Check for compatibility on the Bottle pack.
SodaStream quick connect CO2 cylinder
PREFER
A HOW-TO VIDEO? Simply scan and watch
-
Remove the seal and pull off the cap
-
Pull open the back cover
-
Raise the pink cylinder handle
-
Insert the cylinder*, bottom first
-
Lower the handle for a quick connect
-
Replace the back cover
EXCELLENT!
Move on to the next step
Please carefully read the full SET UP instructions and safety warnings on p.13
and 15-16
*Make sure the carbonation bottle is not connected to the Sparkling Water Maker before inserting the cylinder.
Remember – your cylinder is reusable, when it runs out of CO2, simply bring it back and get it exchanged!
PAY ONLY FOR THE CO2 REFILL.
Get an extra cylinder so you never run out of bubbles!
Make sure to exchange the right CO2 cylinder for your sparkling water maker.
- compatible with your TERRA™
- not compatible
SNAP-LOCK SYSTEM
BOTTLE INSERT
-
Fill the plastic carbonating bottle with cold water up to the fill line
Always fizz water before adding any amour
-
Make sure the bottle rest is tilted out
-
Insert bottle neck into the Snap-Lock system. Push it up and then back.
Bottle is inserted correctly when there’s a gap between the bottle and the base
STUFF TO KNOW
To check if your bottle is dishwasher safe or not, look for one of these
icons:
The bottle’s expiration date is here
DID YOU KNOW?
1 can save up to thousands of single use plastic bottles*
*Based on Global Data Plc Global Volume Packaging Database for years 2017-2020
FIZZING THE MAGIC MOMENT!
-
FIRMLY PUSH the carbonation button all the way down. HOLD DOWN the button for 1 SECOND, and RELEASE
-
Repeat as desired: 3 times for standard fizz 5 times for strong fizz
-
Pull the bottle towards you
ALL DONE!
Enjoy your fab fizzy drink!
Having bubble trouble?
0800 085 8373 +65 9009-0488SG 1300 763 278 0800 00 22 91ZA
NZ 0800 232 633
STUFF TO KNOW
PRO’S TIP: Cold water fizzes better. Keep an extra bottle in the fridge, so
you always have one ready to sparkle!
Want some flavor with your fizz?
Try our range of amours at: SODASTREAM.COM
*Image for illustrative purposes only
Always fizz water before adding any amour
USER LICENSE
FOR ONE SODASTREAM QUICK CONNECT CYLINDER NOT FOR SALE PROPERTY OF SODA-CLUB
(CO2) GMBH OR ITS AFFILIATES PROVIDED UNDER LICENSE AND PATENT PENDING
This is a legally binding document between Soda-Club (CO2) GmbH or its
affiliates (“SodaStream”) and the consumer regarding the right to use a
SodaStream CO2 Quick Connect Cylinder (the “Cylinder”).
The Cylinder is proprietary to Soda Stream, patent pending and protected by
other intellectual property rights. Further, to protect users’ safety and
health, various directives and regulations govern and regulate the use,
refilling, maintenance, retesting and repair of the Cylinder. Soda Stream
possesses the legally required knowledge and expertise to be responsible for
strict legal compliance that can only be guaranteed if the Cylinder is
maintained, examined, retested and refilled by it. Thus, the Cylinder remains
the property of Soda Stream and is provided under License.
- When empty, please return the Cylinder to either Soda Stream or an authorized Soda Stream distributor in exchange for a full Cylinder, for the price of the gas refill only. This License will continue to bind the use of each subsequent Cylinder.
- Refilling an empty Cylinder by third parties may infringe Soda Stream’s intellectual property rights, including patents and other proprietary rights, may be risky and may violate certain laws. Soda Stream only warrants the safety of Cylinders refilled by it, bearing a Soda Stream tamper proof valve seal. You may not remove or change any proprietary notice appearing on or accompanying the Cylinders.
- If you return the Cylinder to Soda Stream or an authorized Soda Stream distributor, without exchanging it for a full one, you will be entitled to a return fee of 2 USD or local equivalent.
- The Cylinder, together with this User License, may be transferred to a third party provided the third party agrees to be bound by the conditions and ownership rights expressed herein. Possession of this User License proves the right of its holder to use one Cylinder under the terms herein.
The laws of Switzerland govern this License.
For questions, please contact Soda Stream International BV, Donges sewed 200,
5047 SH Tilburg, The Netherlands
SET UP
SODASTREAM® CO2 QUICK CONNECT CYLINDER
Please note that the SodaStream® TerraTM is only compatible with the C02 Quick
Connect Cylinder and is NOT compatible with the SodaStream® CO2 Screw System
Cylinder or other cylinders.
- COMPATIBLE SODASTREAM® CO2 QUICK CONNECT CYLINDER
- NON-COMPATIBLE CO2 SCREW SYSTEM CYLINDER
INSTALLING THE CO2 QUICK CONNECT CYLINDER
-
Place the SodaStream® TerraTM Sparkling Water Maker on a flat sturdy surface and remove the back cover.
-
Remove seal and cap from the Soda Stream CO2 Quick Connect Cylinder.
WARNING! Never insert or replace the CO2 Quick Connect Cylinder while a Carbonating Bottle is installed in the Sparkling Water Maker. This can cause the Carbonating Bottle to be ejected or burst. -
Raise pink cylinder handle. Insert the CO2 Quick Connect Cylinder in the back of the Sparkling Water Maker.
-
Lower cylinder Pink Handle.
-
Reinstall the back cover. Now you are ready to create the bubbles.
CREATE THE BUBBLES
-
Fill the plastic carbonating bottle with cold water up to the fill line.
WARNING! Do not carbonate anything other than water. Other liquids can contaminate and clog internal parts, potentially resulting in excessive pressure, bottle failure during carbonation and serious injury. Never carbonate after favoring has been added. -
To insert the plastic carbonating bottle, make sure that the
plastic carbonating bottle rest is angled forward. Please make sure you do not pull the carbonating tube.
WARNING! Never use a Sparkling Water Maker with a broken carbonating tube. This can cause excessive pressure, bottle failure and serious injury. Insert the plastic carbonating bottle neck into the Snap-Lock system. Push the plastic carbonating bottle up and back. The Snap-Lock will hold the plastic carbonating bottle. -
To carbonate, press the carbonating button in short 1 second presses; 3 presses for standard carbonation and 5 presses for strong carbonation.
-
When the desired level of carbonation is achieved, gently pull the plastic carbonating bottle towards you until it reaches its fully forward position. This will release the pressure in the plastic carbonating bottle and allow the plastic carbonating bottle to be released from the Snap-Lock.
WARNING! Do not remove plastic carbonating bottle until after hearing the sound of excess CO2 being released. Never force the plastic carbonating bottle out of the Snap-Lock system. Always allow the Sparkling Water Maker to release the plastic carbonating bottle. If the plastic carbonating bottle does not immediately release from the Snap-Lock system wait a few moments. If it still does not release, then push the plastic carbonating bottle back into the vertical position and gently pull it towards you again. Attempting to remove the plastic carbonating bottle while it is still pressurized can cause uncontrolled ejection of the plastic carbonating bottle and may result in serious injury.
Note: when inserted correctly, there is a small gap between the bottom of the Carbonating Bottle and the base. Do not carbonate if the Carbonating Bottle is resting on the base, or water will splash out.
Note: You may see small pieces of ice appear in the water during carbonation of very cold water. Any ice created will simply melt.
CARE
SPARKLING WATER MAKER CARE
- Never use abrasive cleaners or sharp tools to clean. If needed, use a mild liquid dish soap and a soft damp cloth to gently clean.
- Wipe spills to keep base dry.
- Do not place in water or wash in a dishwasher, doing so will seriously damage your Sparkling Water Maker.
PLASTIC CARBONATING BOTTLE CARE
-
For plastic carbonating bottle which are not “dishwasher safe”, to clean, rinse plastic carbonating bottle with cold or lukewarm water.
WARNING! Do not expose to heat above 50°C. Never wash or rinse in hot water. Do not wash in dishwasher. -
For “dishwasher safe” plastic carbonating bottle , to clean, either wash in dishwasher or rinse plastic carbonating bottle with cold or lukewarm water. WARNING! Do not expose to heat above 70°C.
FOR YOUR SAFETY
SAVE THESE INSTRUCTIONS AND PROVIDE THEM TO ANY SUBSEQUENT USERS.
WARNING! Before using the Sparkling Water Maker, to reduce risk of
personal injury and damage to your product, please read this important safety
information.
Before allowing anyone to use your Sparkling Water Maker, please be sure they
understand how to do so safely. Any servicing or repair should be performed by
a Soda Stream-authorized service representative. The Sparkling Water Maker is
only intended for use by people over the age of 12. People with reduced
physical or mental capabilities should only use the product if they are
supervised by an adult responsible for their safety and after they have been
given instruction concerning the safe use of the product.
TO REDUCE THE RISK OF EITHER SERIOUS INJURY OR DAMAGE TO THE SPARKLING WATER MAKER DURING CARBONATION:
- Only use your Sparkling Water Maker in its upright position, on a flat, stable surface.
- Do not place your Sparkling Water Maker on a hot surface (e.g. kitchen oven/stove) and never use it close to a flame or leave in direct sunlight.
- Carbonate water only.
- Do not add amour before carbonation. Other liquids (except water) can contaminate and clog internal parts, potentially resulting in excessive pressure and bottle failure during carbonation.
- Do not use the the sparkling water maker if the carbonating tube is broken or missing.
- Check that your plastic carbonating bottle is properly connected before carbonating.
- Do not move your Sparkling Water Maker or remove the plastic carbonating bottle during carbonation.
- Do not carbonate an empty plastic carbonating bottle.
CARBON DIOXIDE CO2 CYLINDER
To reduce the risk of a CO2 leak, personal injury and property damage:
- Do not use any cylinder other than the Soda Stream CO2 Quick Connect Cylinder compatible with the Terra TM Pink Handle System.
- Do not insert a CO2 Cylinder into the Sparkling Water Maker when a plastic carbonating bottle is installed.
- Do not use if damaged. Inspect the CO2 Cylinder and CO2 Cylinder valve prior to use for dents, punctures, or other damage. If damaged, contact a Soda Stream-authorized service representative.
- Do not tamper with the CO2 Cylinder in any way, including puncturing, incinerating or removing the valve.
- Do not expose the CO2 Cylinder to heat above 50°C. Protect from sunlight. Store in a well-ventilated area.
- Do not remove a CO2 Cylinder from the Sparkling Water Maker when it is being operated.
- Do not handle or remove a CO2 Cylinder while it is discharging CO2.
- In the event of a CO2 leak, ventilate the area, breathe fresh air and if feeling unwell seek immediate medical attention.
CARBONATING BOTTLE
To reduce the risk of bottle failure which can result in personal injury and
property damage:
- For Carbonating Bottles not marked as “dishwasher safe”, do not expose to heat above 50°C. Never wash or rinse in hot water. Do not wash in dishwasher.
- For “dishwasher safe” Carbonating Bottles, do not expose to heat above 70°C.
- Do not place the plastic carbonating bottle next to a heat source such as your kitchen oven/stove.
- Do not leave the plastic carbonating bottle in a car.
- Do not place the plastic carbonating bottle in the freezer or in extreme cold below 1°C.
- Do not use the plastic carbonating bottle if damaged, deformed, changes in shape, scratched, worn, or discolored.
- Do not use a plastic carbonating bottle after its expiration date.
- Only carbonate with plastic carbonating bottle specifically designed to work with this Sparkling Water Maker, as shown on page 6 above.
FOR BOTTLE WITH WARNING ICONS:
SODASTREAM LIMITED WARRANTY
SODASTREAM SPARKLING WATER MAKERS
Great care has been taken to ensure that your Sparkling Water Maker was
delivered to you in good condition. SodaStream warrants, subject to the terms
and conditions set forth in this limited warranty, that your Sparkling Water
Maker will be free of defects in materials and workmanship under normal home
use for 2 (two) years following the date of purchase. It is recommended that
you register your Sparkling Water Maker online by visiting
www.sodastream.com.au and completing the product registration form available
on the website.
If your Sparkling Water Maker malfunctions within the warranty period, and we
determine the problem is due to faulty workmanship or materials, Soda Stream
will repair or replace it free of charge at Soda Stream’s discretion within
the limitations set out in this warranty. SodaStream may replace your
Sparkling Water Maker with a reconditioned Sparkling Water Maker, or an
equivalent one if the model you purchased is no longer available. No refunds
shall be given. This limited warranty is available to consumers who purchased
the Sparkling Water Maker for personal, family or household use.
This warranty DOES NOT cover damages to Sparkling Water Maker resulting from:
- Abuse, misuse, alteration of the Sparkling Water Maker, or commercial use.
- Carbonating liquids other than water.
- Normal wear and tear (e.g. discoloration).
- Product malfunctions that were a result, in whole or in part, by alteration, disassembly, or repair of the Sparkling Water Maker by a servicer other than an authorized Soda Stream Service Center.
- The use of CO2 Cylinders or carbonating bottles other than those approved by Soda Stream for use with your Sparkling Water Maker.
- The use of the Sparkling Water Maker with an adapter connected to the Cylinder valve or to the Sparkling Water Maker.
- The use of an expired Carbonating Bottle.
- accident, shipment or anything other than normal household use.
This warranty DOES NOT cover the Carbonating Bottles and CO2 Cylinders.
Soda Stream is not liable for incidental or consequential damages. The
consumer’s sole and exclusive remedy shall be repair or replacement according
to the terms and conditions of this warranty. Some local laws do not allow the
exclusion or limitation of these damages, so these exclusions may not apply to
you. To the extent that this warranty is inconsistent with local law, this
warranty shall be deemed modified to be consistent with such local law.
You may also have other rights, which vary in accordance with local laws. The
benefits given to the consumer by this warranty are in addition to other rights
and remedies that may be afforded to the consumer by law in relation to this
Sparkling Water Maker.
TO OBTAIN WARRANTY SERVICE FOR YOUR SPARKLING WATER MAKER
If your Sparkling Water Maker is in need of warranty service, please contact
Soda Stream Customer Service by visiting www.sodastream.com. A Soda Stream
representative will give you specific instructions on how to arrange for the
shipment of your Sparkling Water Maker, at your expense, to one of our
authorized service centers. Only Soda Stream, or its agents, are authorized to
provide warranty repairs or service to your Sparkling Water Maker.
NON-WARRANTY SERVICE
If Soda Stream or its authorized agents determine that the malfunction or damage to your Sparkling Water Maker is not covered by the warranty, Soda Stream will repair the Sparkling Water Maker only upon payment of the determined repair charge.
FOR AUSTRALIAN RESIDENCE
Our Sparkling Water Maker comes with guarantees that cannot be excluded under
the Australian Consumer Law. Australian residence are entitled to a
replacement or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. Australian residence are also entitled
to have the Sparkling Water Maker repaired or replaced if it fails to be of
acceptable quality and the failure does not amount to a major failure. The
issuer of this warranty is Soda Stream Australia Pty Ltd., 21 Henderson Road,
Kneeled, Victoria 3180, Australia, Telephone No.: 1300 763 278, email: sales-
australia@sodastream.com Should the
Sparkling Water Maker suffer a major failure or other reasonably foreseeable
damage, contact us at the above phone number, email or mailing address to
present your claim for the warranty. If Australian residence are returning the
Sparkling Water Maker in accordance with their rights under the Australian
Consumer Law: (a) the Sparkling Water Maker does not need to be in its
original packaging to be returned, however you must ensure that the Sparkling
Water Maker is adequately protected for transit; and (b) Australian residence
will be required to pay any delivery costs when returning items to us, however
SodaStream Australia Pty Ltd., will refund reasonable delivery costs if they
are entitled to a remedy under the Australian Consumer Law (subject to you
providing proof of these costs). The benefits to the Australian consumer given
by this warranty are in addition to other rights and remedies that may be
afforded to the Australian consumer by law in relation the Sparkling Water
Maker.
SODASTREAM CO2 QUICK CONNECT CYLINDERS
Your Sparkling Water Maker has been designed to operate with a Soda Stream CO2
Quick Connect Cylinder. The use of other CO2 Cylinders is not recommended as
they may not be compatible with a Soda Stream Sparkling Water Maker. Damages
resulting from the use of a cylinder other than a the SodaStream CO2 Quick
Connect Cylinder or use of the Soda Stream CO2 Quick Connect Cylinder not in
accordance with the instructions included in this User Guide are not covered
by the warranty.
The SodaStream CO2 Quick Connect Cylinder is provided to you under license.
The license allows you to exchange your empty Cylinder for a full one for the
price of the CO2 only.
SODASTREAM CARBONATING BOTTLES
Your Sparkling Water Maker has been designed to operate with a compatible
SodaStream plastic carbonating bottle. Damages resulting from the use of a
carbonating bottle other than a compatible SodaStream plastic carbonating
bottle or use of plastic carbonating bottle not in accordance with the
instructions included in this User Guide are not covered by the warranty.
SodaStream plastic carbonating bottle are available from authorised SodaStream
retailers.
TERMS AND CONDITIONS
Any and all claims, complaints, demands for judgment or legal actions brought
hereunder relating in any way to your Sparkling Water Maker, plastic
carbonating bottle or CO2 Quick Connect Cylinder shall be governed by, and
construed in accordance with the local laws of the country in which the
SodaStream Sparkling Water Maker was purchased.
PRODUCT DISPOSAL INSTRUCTIONS
Please recycle your expired and damaged Carbonating Bottles in accordance with
local recycling laws. The packaging in which SodaStream products are supplied
is made of recyclable materials. Contact your local authority for further
information on recycling.
MACHINE RATING INFORMATION
Maximum Working Pressure: 116 psi/8 bar
Maximum Allowed Operating Temperature: 40°C
Soda Stream is a registered trademark of Soda-Club (CO2) GmbH or its
affiliates.
CALL US
WE’RE HERE FOR ALL YOUR BUBBLY QUESTIONS:
- 0800 085 8373
- 1300 763 278
- +65 9009-0488
- 0800 00 22 91
- 0800 232 633
COME ON BOARD
REGISTER YOUR MACHINE AND RECEIVE EXCLUSIVE INFORMATION AND OFFERS Go to
sodastream.com/rest or scan the code:
References
- SodaStream | Better for You, Better for the Environment
- SodaStream België Officiële Winkel – SodaStream Belgium
- SodaStream Official: Sparkling Water Makers, Carbonating Gas Cylinders
- SodaStream Officieel – Nederland
- SodaStream België Officiële Winkel – SodaStream Belgium
- SodaStream Official: Sparkling Water Makers, Carbonating Gas Cylinders
- More Than Just Sparkling Water Makers - SodaStream Australia
- Machine à eau gazeuse et à soda – Sodastream France
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>