FRITZ Box 5590 Fiber User Guide

**FRITZ Box 5590 Fiber User Guide

**

Danger due to Lasers

Laser light can damage your sight! Do not look directly into the fiber optic cable or the fiber optic sockets on the FRITZ! Box or the fiber optic connection.

Safety Instructions

• Do not operate the FRITZ! Box during an electrical storm.
• The ventilation slits of the FRITZ!- Box must never be obstructed.
• Do not place the FRITZ!Box on excessively heat-sensitive surfaces.
• Connect the FRITZ!Box to an easily accessible outlet.
• The FRITZ! Box is intended only for indoor operation.

Connect to Electrical Power

To avoid disruptions, do not bend the fiber optic cable, and do not remove the dust protection caps until right before launching operation.

Establishing a Wi-Fi Connection (Smartphone)

• Scan the QR code and establish the Wi-Fi connection directly or
• Open the Wi-Fi settings of your smartphone, select the Wi-Fi network of your FRITZ! Box 5530 Fiber, and establish the connection with the Wi-Fi password.
  

Establishing a Wi-Fi Connection (Windows Computer)

• Click on the Wi-Fi icon in the Windows task bar.
• Select the Wi-Fi network of your FRITZ! Box 5530 Fiber from the list of Wi-Fi networks and click on “Connect”.
• Push the “Connect/WPS” button briefly. The Wi-Fi connection will be established.
  

Connecting to the Fiber Optic Connection

1. Remove the dust protection caps from the fiber optic cable, the SFP module, and from the fiber optic junction box (FOJB).
2. Connect the FRITZ! Box to the FOJB with the fiber optic cable.

Connect to the Computer (LAN)

Configuring the Internet Connection

• Enter http://fritz.box in a web browser. The FRITZ! Box user interface appears.
• Enter the FRITZ! Box password when prompted to do so, and then follow the Wizard‘s instructions until configuration has been completed.
  

Registering a Cordless Telephone

• If you have a FRITZ! Fon, start your telephone and press the “Connect/WPS” button on the FRITZ! Box. Three LEDs flash and the FRITZ! Box is registered.
• Telephones from other manufacturers must first be made ready for registration; then enter the PIN of the FRITZ! Box on the telephone (a value of “0000” is preconfigured) before com – ple ting registration with the “Connect/WPS” button.
  

Connect Telephones by Cable

You can connect telephones to the FRITZ! Box by cable.

During operation, only one of the two Fon 1 sockets may be used.

*also fax machines or answering machines

AVM declares herewith that the device is compliant with the requi – rements and the rules in directives 2014/53/EU, 2009/125/EC and 2011/65/EU. The long version of the declaration of CE conformity is available at http://en.avm.de/ce.

To improve the product and ensure safe operation on your connection, AVM uses diagnostic data where needed. This setting can be changed in the user interface under Internet / Account Information / AVM Services .

Frequencies

DECT
1880 MHz – 1900 MHz, maximal 250 mW
Wi-Fi
2,4 GHz – 2.483 GHz, max. 100 mW 5.15 GHz – 5.35 GHz, max. 200 mW 5.47 GHz – 5.725 GHz, max. 1000 mW In the 5-GHz band for Wi-Fi, the range from 5.15 GHz to 5.35 GHz is intended only for indoor use. This restriction or requirement is effective in the states AT, BE, BG, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IT, LT, LU, LV, MT, NL, PL, PT, RO, SE, SI, SK, UK

Legal information and the valid licensing conditions are presented in the user interface: / Legal / Legal Notice More information is available on our website: en.avm.de/service

en.avm.de/service/manuals
en.avm.de/guide
en.avm.de/nc/service/downloads
en.avm.de/service/support-request/your-support-request

© AVM GmbH, 10547 Berlin 06.2022 521616040_1004080_02

References

• Service | AVM Deutschland
• Service | AVM Schweiz
• Declarations for FRITZ!Box | AVM International
• Guide | AVM International
• Manuals | AVM International
• Servicio | AVM España
• Assistenza | AVM Italia
• Service | AVM Nederland

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>