FRITZ 1200 AX Wi-Fi Repeater User Guide
- June 5, 2024
- FRITZ
Table of Contents
- Safety
- Package contents
- Device Features
- Connection Possibilities
- Setting Up the Wi-Fi Connection
- Configuring a LAN Connection
- Positioning the FRITZ! Repeater
- FRITZ!App WLAN
- Configuring the FRITZ! Repeater
- Radio Frequencies and Transmitter Power
- Legal Notice
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Repeater
1200 AX
Quick Start Guide
The FRITZ! Repeater 1200 AX extends the Wi-Fi network of a FRITZ! Box or any other wireless router. On its LAN port, network devices can be connected to the FRITZ! Repeater or it can be connected with a FRITZ! Box or another wireless router by cable.
Manual
This quick guide includes important information for launching the operation of
your FRITZ! Repeater 1200 AX. All further information can be found in our PDF
manual and in the Knowledge Base at
en.avm.de/service.
Wireless Routers from Other Manufacturers
You can use the FRITZ! Repeater 1200 AX with routers from other manufacturers.
For the sake of simplicity, this quick guide will refer to the FRITZ! Box,
unless a given function is only supported by a certain type of device.
Mesh with FRITZ!
The FRITZ! Repeater 1200 AX supports Mesh in combination with a FRITZ! Box
with FRITZ!OS 7.0 (or higher). In the Mesh of a FRITZ!Box, FRITZ! products
with Wi-Fi functionality automatically adopt various settings to build an
especially powerful Wi-Fi network. The Mesh Overview of the FRITZ! Box user
interface presents information on the connections in the Mesh and allows you
to update your FRITZ! products.
Safety
Safety instructions for FRITZ!Repeater 1200 AX
| Handling | Do not cover the ventilation slits |
|---|
Never let liquids get inside the housing
Do not open the housing; it may only be repaired by a qualified technician
Unplug it from the outlet before cleaning
Only clean with a slightly damp cloth
place of use| Only plug it into outlets that are easy to reach
Dry and dust-free environment
Do not use outdoors
Package contents
| Name | Illustration |
|---|---|
| 1 FRITZ!Repeater 1200 AX | 
1 LAN cable|
1 quick guide| no illustration
Device Features
| Name | Illustration | Function | Action/Meaning |
|---|---|---|---|
| Connect button | Establish connection | Press and hold for 1 second | |
| Connect with another access point | Press and hold for 6 seconds | ||
| LED | on | Connection established, good connection | |
| flashing | slowly (every 2 seconds): not connected with FRITZ!Box, no Wi-Fi |
connection set up fast (twice per second): procedure like WPS, restart or
update in progress
| on| Weak connection
flashing| Connection interrupted
| off| Wi-Fi not enabled; a schedule may be configured
LAN port| | Connect network devices by cable
Connection Possibilities
You can connect the FRITZ! Repeater 1200 AX with a FRITZ! Box via Wi-Fi or using a LAN cable.
Wi-Fi connection to the FRITZ! Box if| LAN connection to the FRITZ!
Box if
---|---
the FRITZ! Repeater is to be used within the Wi-Fi range of the FRITZ! Box|
the FRITZ! The repeater is to be used outside the Wi-Fi range of the FRITZ!
Box or another repeater in the home network
a network device without Wi-Fi support is to be integrated into the home
network via the LAN port on the repeater| it is possible to establish a LAN
connection (for example using the existing cabling in your home)
|
Continue reading at “Setting Up the Wi-Fi Connection” on page 20.| Continue
reading at “Configuring a LAN Connection” on page 21.
Setting Up the Wi-Fi Connection
| Action| Illustration
---|---|---
1| Plug the FRITZ!Repeater into an electrical outlet near the FRITZ!Box.|
2| Wait until the LED starts flashing slowly.|
3| Start the connection on the FRITZ! Repeater: Press the Connect button. The
LED flashes rapidly.|
4| Start the connection on your FRITZ! Box:
• FRITZ! Box with Connect/WPS, Connect or WPS button: Press the button briefly
The WLAN or Connect LED flashes.
• On a FRITZ!Box with the WLAN/WPS or WLAN button: Press the button for about
6 seconds until WLAN starts flashing.
• On another wireless router: press the button that starts WPS.|
5| As soon as the LED on the FRITZ!The repeater lights up permanently, the
connection has been established. If the LED on the FRITZ! Repeater starts
flashing slowly again, repeat steps 3 and 4 of these instructions.|
When the connection has been established, move the FRITZ! Repeater to the desired location. Continue reading on page 22. If the Wi-Fi connection cannot be established at the touch of a button, you will find alternative instructions in the PDF manual at en/avm.de/service.
Configuring a LAN Connection
The table shows how to configure a LAN connection between the FRITZ! Repeater and the FRITZ!Box on a computer. More configuration options can be found in our PDF manual at en.avm.de/service.
| Action
---|---
1| Plug the FRITZ!Repeater into an electrical outlet.
2| Connect the FRITZ! Repeater to your computer using the LAN cable and wait
until the Connect LED starts flashing slowly.
3| Enter http://fritz.repeater in a web browser. The user interface of the
FRITZ! Repeater appears.
4| Follow the instructions of the wizard in the user interface until the
configuration is complete, selecting LAN Bridge as the type of connection.
5| Connect the FRITZ! Repeater to your FRITZ!Box using the LAN cable. As soon
as the Connection Quality and Connect LEDs light up permanently, the FRITZ!
The repeater is ready for operation.
On a FRITZ!Box with FRITZ!OS 7.0 or higher, enable Mesh
| 1 | Press the Connect button on the FRITZ! Repeater. The Connect LED flashes. |
|---|---|
| 2 | Within two minutes, confirm on your FRITZ! Box that Mesh has been enabled: |
• FRITZ!Box with Connect/WPS, Connect or WPS button: Press the button briefly
• FRITZ!Box with WLAN/WPS or WLAN button: Press the button for at least 6
seconds.
Positioning the FRITZ! Repeater
Once you have configured a Wi-Fi connection to the FRITZ!Box for the FRITZ!
Repeater, move the repeater to the desired location.
Connect the FRITZ! Repeater to an outlet located about halfway between the
FRITZ!Box and the wireless devices for which the Wi-Fi network is to be
extended. The FRITZ!Repeater and the FRITZ! Box reestablish the configured
connection automatically.
| Connection quality | Display on the FRITZ!Repeater |
|---|---|
| good connection | |
| weak connection | |
| no connection |
If connection quality is insufficient, select an outlet closer to the FRITZ!
Box.
You can position the FRITZ! Repeater precisely using the FRITZ!App WLAN.
FRITZ!App WLAN
| Google Play (Android) | App Store (iOS) |
|---|---|
| https://play.google.com/store/apps/details?id=de.avm.android.wlanapp&hl=de |
https://itunes.apple.com/de/app/fritz-app-wlan/id1351324738
Positioning the FRITZ! Repeater precisely with the FRITZ!App WLAN en.avm.de/products/fritzapps
Configuring the FRITZ! Repeater
| FRITZ!Repeater on | Settings and Information |
|---|---|
| FRITZ!Box with Mesh (FRITZ!OS 7.0 or higher) | The FRITZ! Repeater in the Mesh |
automatically adopts all of the settings of the FRITZ! Box.
Information on your repeater is available in the user interface of the FRITZ!
Box http://fritz.box under Home Network / Mesh.
FRITZ!Box (FRITZ!OS 7.0 or earlier)| During WPS, the FRITZ! Repeater adopts
the Wi-Fi network name and Wi-Fi password of the FRITZ! Box. Further settings
can be configured via the user interface of the FRITZ! Repeater:
http://fritz.repeater.
Wireless router from another manufacturer| During WPS, the FRITZ! Repeater
adopts the Wi-Fi network name and Wi-Fi password of the wireless router.
Further settings can be configured via the IP address user interface of the
FRITZ! Repeater.
1. Open the user interface of your wireless router.
2. Determine the IP address of the FRITZ!Repeater.
3. Enter the IP address of the FRITZ! Repeater in a web browser.
The user interface of the FRITZ! Repeater appears.
Radio Frequencies and Transmitter Power
- Wi-Fi: 2.4 GHz – 2.483 GHz, max. 100 mW
- Wi-Fi: 5.15 GHz – 5.35 GHz, max. 200 mW
- Wi-Fi: 5.47 GHz – 5.725 GHz, max. 1000 mW
- In AT, BE, BG, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IT, LT, LU, LV, MT, NL, PL, PT,
RO, SE, SI, SK, UK, Wi-Fi between 5.15 GHz and 5.35 GHz may only be used indoors.
Legal Notice
Declaration of CE Conformity
AVM declares herewith that the FRITZ! The repeater is compliant with the basic
requirements and the relevant rules in directives 2014/53/EU, 2009/125/EC and
2011/65/EU.
The long version of the declaration of CE conformity is available at
en.avm.de/ce.
Diagnostics Data
To improve the product and ensure safe operation on your connection, AVM uses
error reports and diagnostic data where needed.
These settings can be changed by clicking on Contents below the menu, and on
AVM Services in the footer.
Disposal
In accordance with European directives, the FRITZ! Repeater and its cables may
not be disposed of with household waste. Please bring these to your local
collection points for disposal.
Legal Notice
Legal information and licensing conditions are presented in the help of the
user interface.
Top 10 knowledge documents
Downloads
Manuals
Support
en.avm.de
© AVM GmbH, 10547 Berlin
References
- FRITZ!Apps | AVM Deutschland
- Service | AVM Deutschland
- FRITZ!Apps | AVM België
- Service | AVM België
- Complete home networking | AVM International
- Declarations for FRITZ!Box | AVM International
- Productos | AVM España
- Servicio | AVM España
- Servicio | AVM España
- Assistenza | AVM Italia
- FRITZ!Apps | AVM Italia
- FRITZ!Apps | AVM Nederland
- Service | AVM Nederland
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>