FRITZ 7590 AX with VDSL/ADSL2+ – Modem User Guide

FRITZ 7590 AX with VDSL/ADSL2+ – Modem User Guide

Package Contents

Safety Instructions

• Do not install the FRITZ!Box during an electrical storm.
• During a storm, disconnect the FRITZ!Box from the power supply and from the internet.
• The ventilation slits of the FRITZ!Box must never be obstructed.
• Do not place the FRITZ!Box on overly heat-sensitive surfaces.
• Connect the FRITZ!Box to an easily accessible outlet.
• The FRITZ!Box is intended only for indoor operation.

See also the security instructions in your FRITZ!Box manual.

Connect to Electric Power

• Connect the FRITZ!Box to electric power. The “Power” LED begins flashing.

Connect to the DSL Network

Use the grey DSL cable to connect the FRITZ!Box to your All-IP or direct access line. If you have a DSL line and also an analog or ISDN telephone line with a DSL splitter, connect the FRITZ!Box with the gray-black DSL/telephone and the telephone adapter included in the package. For more instructions, read the PDF manual available at en/avm.de/service

Connect Telephones by Cable

Connect your telephones: Connect analog devices to the sockets “FON 1” and “FON 2”,
ISDN devices to the socket “FON S0”.

Register Cordless Telephones

1. Put your telephone in registration mode.
2. Enter the PIN of the FRITZ!Box on the telephone (the preset value is “0000”).
3. Press the “Connect/WPS” button until the LED begins flashing. Your telephone is
   registered.

The FRITZ!Box uses the DECT standard to support up to six cordless telephones.

Connect Computers

Wi-Fi

1. Click the Wi-Fi icon in the task bar.
   A list appears on the screen showing all wireless networks.

2. Select the wireless network of your FRITZ!Box 7590.

3. Enter the network key and click “Connect”.

LAN

Setting up in the User Interface

1. Open a web browser on the computer and enter http://fritz.box.The user interface appears.
2. Enter the password for the FRITZ!Box and follow the instructions displayed on the
   screen.. After the wizard has concluded you can surf the web with all connected devices.

LED/Voyants

Radio Frequency Specifications

DECT
1880 MHz – 1900 MHz, max. 250 mW

WLAN / Wi-Fi
2.4 GHz: 2.4-GHz – 2.483 GHz, max. 100 mW
5 GHz: 5.15 GHz – 5.35 GHz, max. 200 mW, 5.47 GHz – 5.725 GHz, max. 1000 mW

The range from 5.15 GHz to 5.35 GHz is intended only for indoor use. This restriction or
requirement is effective in the countries AT, BE, BG, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IT, LT, LU, LV, MT, NL, PL, PT, RO, SE, SI, SK, UK.

Service

Legal information and the valid licensing conditions are presented in the user interface
under “ / Legal / Legal Notice”.

More information is available on our website: en.avm.de/service

CE

AVM declares herewith that the device is compliant with the basic requirements and the relevant rules in directives 2014/53/EU, 2009/125/EC and 2011/65/EU.

The long version of the declaration of CE conformity is available at http://en.avm.de/ce

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>