FRITZ 6660 Cable WLAN Router User Guide

: June 5, 2024
: FRITZ

Table of Contents

Package Contents
Safety Instructions
CE
Diagnostics
**Service
Documents / Resources

FRITZ! Box 6660 Cable
Quick Start Guide

Package Contents

Safety Instructions

Do not install the FRITZ! Box during an electrical storm.
During a storm, disconnect the FRITZ! Box from the power supply and from the internet.
The ventilation slits of the FRITZ! Box must never be obstructed.
Do not place the FRITZ! Box on overly heat-sensitive surfaces.
Connect the FRITZ! Box to an easily accessible outlet.
The FRITZ! Box is intended only for indoor operation.

Connect with the Cable Junction

Connect the FRITZ! Box to your multimedia socket using a coaxial cable.
Options A and C show how to connect the FRITZ! Box to various multimedia sockets. Option B shows how to connect a multimedia socket adapter to a radio/TV socket. The coaxial cable and the adapter are not included in the FRITZ! Box package.

Connect to Electrical Power

Establish Wi-Fi Connection (Smartphone)

Scan the QR code and establish the Wi-Fi connection directly. or
Open the Wi-Fi settings of your smartphone, select the Wi-Fi network of your FRITZ!Box 6660 Cable, and establish the connection with the Wi-Fi password.

Establish a Wi-Fi Connection (Windows Computer)

Click on the Wi-Fi icon in the notification area of the Windows task bar.
Select the Wi-Fi network of your FRITZ!Box 6660 Cable from the list of Wi-Fi networks and click on “Connect”.
Push the “Connect/WPS” button briefly. The Wi-Fi connection will be established.

Connect a Computer Using a Network Cable

Configure Internet Access

Enter http://fritz.box in a web browser.
The user interface of the FRITZ! Box appears.
Enter the FRITZ! Box password when prompted to do so, and then follow the instructions until configuration has been completed.
The internet connection is configured and you can surf the web with the connected devices.

Register a Cordless Telephone

If you have a FRITZ!Fon, start your telephone and press the “Connect/WPS” button on the FRITZ!Box. Three LEDs flash and the FRITZ!Box is registered.
Telephones from other manufacturers must first be made ready for registration; then enter the PIN of the FRITZ!Box on the telephone (a value of „0000“ is preconfigured) before completing registration with the “Connect/WPS” button..

Connect Telephones by Cable

CE

AVM declares herewith that the device is compliant with the requirements and the rules in directives 2014/53/EU, 2009/125/EC and 2011/65/EU. The long version of the declaration of CE conformity is available at http://en.avm.de/ce..

PEFC

Diagnostics

To improve the product and ensure safe operation on your connection, AVM uses diagnostic data where needed. This setting can be changed in the user interface under Internet / Account Information /AVM Services.

Frequencies

DECT	• 1880 MHz – 1900 MHz, max. 250 mW
Wi-Fi	• 2.4 GHz – 2.483 GHz, max. 100 mW

• 5.15 GHz – 5.35 GHz, max. 200 mW
• 5.47 GHz – 5.725 GHz, max. 1000 mW
In the 5-GHz band for Wi-Fi, the range from 5.15 GHz to 5.35 GHz is intended only for indoor use. This restriction or requirement is effective in the states AT, BE, BG, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IT, LT, LU, LV, MT, NL, PL, PT, RO, SE, SI, SK, UK.

**Service

**

Legal information and the valid licensing conditions are presented in the user interface under? / Legal Notice / Legal Notice.
More information is available on our website en.avm.de/service

en.avm.de/service/manuals
en.avm.de/guide
en.avm.de/nc/service/downloads
en.avm.de/service/support-request/your-support- request

© AVM GmbH, 10547 Berlin • 06/2021 • 521584002_1001300_02