AUSTIN RP-920 20 Inch LCD User Manual

RP-920 20 Inch LCD
User Manual User Manual
20” LCD

RP-920 20 Inch LCD

**dedicated KVM switch and rackmount screen technology
RP-920
Rackmount Display Panel**
Options :
– SDI / MCS
– AV / HDMI / Audio
– Touchscreen / DC power
– MIL-type or lockable connector Designed and manufactured by Austin Hughes

Legal Information

First English printing, July 2022
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.

Safety Instructions

Please read all of these instructions carefully before you use the device. Save this manual for future reference.

• Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
• Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with temperatures not exceeding 40º Celsius (104º Fahrenheit).
• When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing damage to other equipment or injury to persons nearby.
• When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the power supply. Proper air convection is necessary to keep it from overheating.
• Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
• If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed on the equipment’s ratings label.
• Observe all precautions and warnings attached to the equipment.
• If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being damaged by transient over-voltage.
• Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power supply or on other hardware may cause damage, fi re or electrical shock.
• Only qualifi ed service personnel should open the chassis. Opening it yourself could damage the equipment and invalidate its warranty.
• If any part of the equipment becomes damaged or stops functioning, have it checked by qualifi ed service personnel.

What the warranty does not cover

• Any product, on which the serial number has been defaced, modifi ed or removed.
• Damage, deterioration or malfunction resulting from:
  • Accident, misuse, neglect, fi re, water, lightning, or other acts of nature, unauthorized product modifi cation, or failure to follow instructions supplied with the product.
  • Repair or attempted repair by anyone not authorized by us.
  • Any damage of the product due to shipment.
  • Removal or installation of the product.
  • Causes external to the product, such as electric power fluctuation or failure.
  • Use of supplies or parts not meeting our specifi cations.
  • Normal wear and tear.
  • Any other causes which does not relate to a product defect.
• Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifi cations made to this equipment may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Re-position or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected.

Before Installation

• It is very important to mount the equipment in a suitable cabinet or on a stable surface.
• Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration.

Unpacking

The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

How To Clean Your LCD Monitor

Caution :

• To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or plugging your monitor into an electrical outlet.
• When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can scratch or damage your display. Pressure damage is not covered under warranty.
• Use only cleansers made specifi cally for cleaning monitors and monitor screens. Cleansers not made to clean monitors and monitor screens can scratch the LCD display or strip off the fi nish.
• Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly onto the screen or case can cause damage which is not covered under warranty.
• Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

1. To clean your LCD safely, please follow these steps :
2. Disconnect the power cord.
3. Gently wipe the surface using a clean, dry microfi ber cloth. Use as little pressure as possible.

Cleaning Tough Marks and Smudges

1. To remove tough marks and smudges, please follow these steps :

2. Disconnect the power cord.

3. Spray a small amount of non-abrasive cleanser on a microfi ber cloth.
   Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your microfi ber cloth fi rst, not directly on the parts you are cleaning.

4. Gently wipe the surface. Use as little pressure as possible.

5. Wait until your monitor is completely dry before plugging it in and powering it up.

< Part 1 > RP-920

< 1.1 > Package Content RP-920 X 1
6ft VGA cable X 1
Power adapter X 1
Power cord X 1
< 1.2 > Structure Diagram
Front view

1. LCD panel

2. LCD membrane
   

3. Audio speaker

4. Power adapter basket
   

Rear view

< 1.2 > Dimension – RP-920 Bottom View

UNIT : mm
1mm = 0.03937 inch

Model| Product Dimension
(W x D x H)| Packing Dimension
(W x D x H)| Net Weight| Gross Weight
---|---|---|---|---
RP-920| 480 x 63.5 x 399 mm
18.9 x 2.5 x 15.7 inch| 583 x 124 x 529 mm
23 x 4.9 x 20.8 inch| 8.4 kg
18.5 lb| 10.7 kg
23.5 lb

< 1.3 > Installation
Step 1

• Mount the display panel with M6 screw set.
• M6 screw x 8 pcs required ( Left & right side ).

M6 screw sets are not provided. Step 2

• Fix the LCD into the rack.

< Part 2 > Specifications / OSD

< 2.1 > Product Specifi cations – RP-920

LCD Panel| Manufacturer|
---|---|---
Panel Size ( diagonal )| 20-inch TFT color LCD
Display pixel ( dots x lines )| 1600 x 1200
Brightness ( typ. )| 300
Contrast Ratio ( typ. )| 800:01:00
Color| 16.7 M
Viewing Angle ( L/R/U/D )| 89/89/89/89
Response Time ( ms )| 16
Dot pitch ( mm )| 0.255
Display Area ( mm )| 408.00H x 306.00V
Surface treatment| Anti-glare, Hard-coating
Surface hardness| 3H
Backlight Type| CCFL
MTBF ( hrs )| 45,000
Video Connectivity| Digital| HDMI| HDMI 1.3, CEA-861-D
---|---|---|---
DVI| DVI-D, TMDS single link
Analog| VGA| Analog 0.7Vp-p
Plug & Play| DVI / VGA| VESA EDID structure 1.3
Synchronization| VGA| Separate, Composite & SOG
Audio Connectivity| Audio Input| 3.5mm stereo jack| 3.5mm stereo jack
---|---|---|---
30kΩ / 750mV| 30kΩ / 750mV
Audio Output| 3.5mm stereo jack| 3.5mm stereo jack
30kΩ / 2.8V| 30kΩ / 2.8V
Speaker| 2W x 2| 2W x 2

*When the audio output is connected, speaker output is OFF

18.9 x 2.5 x 15.7 inch
---|---|---
Packing ( W x D x H )| 583 x 124 x 529 mm
23 x 4.9 x 20.8 inch
Net Weight| 8.4 kg / 18.5 lb
Gross Weight| 10.7 kg / 23.5 lb
Applicable Format| DVI-D / VGA Input| PC Signal| 1600 x 1200 x 60Hz
---|---|---|---
1400 x 1050 x 60Hz
1440 x 900 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 768 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
HDMI Input| PC Signal| Same as VGA
Video Signal| 720p : 50 / 60Hz
480p : 60Hz
576p : 50Hz
Audio Signal| 2ch Linear PCM ( 32 / 44.1 / 48 KHz )

Intentionally Left Blank
< 2.2 > On-screen Display Operation ( OSD )![AUSTIN RP-920 20 Inch LCD

• Display Operation](https://manuals.plus/wp-content/uploads/2023/03/AUSTIN- RP-920-20-Inch-LCD-Display-Operation.png)

Act as an Enter key to select screen setting options
| Scroll through menu options and adjust the displayed control
| Exit the OSD screen
Go back to the previous on-screen sub-menu or main menu

Remark : All LED touch buttons in WHITE light.
The LED of Power touch button will fl ash continuously when there is no signal input.

1. All the LED touch buttons will automatically turn off after 10 minutes of idle status ( except the Power ).
2. Light up all membrane buttons, please press any button for 1 – 2 seconds ( except the Power ).
3. Select another video input (only available for models with multiple video input) :
   ( a ) Press the button to call up the on-screen video mode on top right corner.
   ( b ) Use up/down arrow to the select the video input
   ( c ) Press the button to confirm the selection

< 2.2 > On-screen Display Operation ( OSD )

OSD Confi guration Page

| Image:
for the brightness, contrast, color temp, red, green, and blue
---|---
| Geometry:
for the auto adjust, H position, V position, phase and clock
| Video:
for the colour, tint, sharpness, noise reduction, DCDi and TV Setup
| Audio:
for volume, bass, treble, balance, AVL and mute
| Misc:
for the language, OSD position, graphic mode, ratio, reset and timer

< Part 3 > Options

< 3.1 > Options : 3G / HD / SD-SDI input
Austin Hughes’ SDI input is an ideal solution for the broadcastgrade video and high resolution CCTV market.
Designed for use with CyberView displays, a SDI input module can support up to 1080p @60Hz resolution without using additional space or power and it comes standard with a 2-year warranty.
SDI *** For SDI option, the AD board will be upgraded to AV3.0, and this comes standard with HDMI, DVI-D, VGA, S-Video, BNC and audio inputs.

1080p
1080i
720p| @60 / 50Hz, 4:2:2
@30 / 25 / 24Hz, 4:4:4
@60 / 50Hz, 4:4:4
@60 / 50Hz, 4:4:4
---|---|---|---
HD-SDI| 1080p
1080i
720p| @30 / 25 / 24Hz, 4:2:2
@60 / 50Hz, 4:2:2
@60 / 50Hz, 4:2:2
SD-SDI| 480i| @60Hz, 4:2:2
ITU-R  BT.656| 576i| @50Hz, 4:2:2
Compatible Audio Format| 3G-SDI| 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
---|---|---
HD-SDI| 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
SD-SDI| 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized /Asynchronized Video
Max. Transmission Distance
75 ohm coaxial cable| 3G-SDI| 150m at 2.97Gb/s
---|---|---
HD-SDI| 250m at 1.485Gb/s
SD-SDI| 480m at 270Mb/s

< 3.2 > Options : MCS ( Multi-display Control )
More control is always good. Especially when it is necessary and easy. Austin Hughes provides MCS solution to control the OSD of various CyberView LCD display up to 64 units. The RS-232C is used for the communication between the PC and the fi rst display via a 15 feet serial cable while the CAN bus is used for the various LCD displays cascade together via CAT 5/6 cable, and daisy chain up to 1,000 meters.
Designed for use with CyberView LCD displays, Austin Hughes provides a MCS input module without using additional space or power and it comes standard with a 2-year warranty. Please download the protocol of MCS control at : http://www.austin-hughes.com/support/usermanual/cyberview/UM-CV-MCS.pdf
For MCS option, casing depth will be changed. < 3.3 > AV2.2D Upgrade Options :
– Audio ( Built-in Dual Stereo Speakers, 2W x 2 )
( 3.5mm audio jacks for audio in & out ) < 3.4 > AV2.2H Upgrade Options :
– HDMI ( HDMI 1.3, CEA-861-D )
– Audio ( Built-in Dual Stereo Speakers, 2W x 2 )( 3.5mm audio jacks for audio in & out ) Either HDMI or DVI-D can be selected.
< 3.5 > Options : Touchscreen & driver
Resistive 1-pt Touch screen Specifi cation

• USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc
• For detailed information, please refer to the attached CD disc
• As the touchscreen unit is not made of toughened glass, please handle it carefully

TRB Driver
Please follow the below steps to setup the touch screen:-
Step 1. Run the bundled CD disc or download the driver from the link below : http://www.austin-hughes.com/resources/driver/ultraview
Step 2. Double click the Setup.exe
Step 3. Follow the installation instruction to fi nish the setup
Step 4. After installation, run the TouchKit program & the “4 point calibration” Please do the initial calibration after the fi rst setup
< 3.6 > Options : DC Power

Input rating
Input voltage:| 12-Volt| 48-Volt| 110-Volt| 300-Volt
Input range:| 9 ~ 18V| 36 ~ 75V| 66 ~ 160V| 180 ~ 425V
Input current
– No load| 50 mA| 50 mA| 35 mA| 10 mA
– Full load| 4950 mA| 1220 mA| 749 mA| 600 mA
Output rating
Output voltage:| 12-Volt| 12-Volt| 12-Volt| 12-Volt
Output current:| 4.16A| 4.16A| 6.25A| 12.5A
Efficiency| 84%| 85%| 91%| 86%

*** For DC power option :
( 1 ) If the unit with LCD, earthing may be required
< 3.8 > Options : MIL-type or Lockable Connector

*** There are several additional MIL DC and VGA connector types with varying design characteristics to meet cost considerations and to provide users with the most design flexibility possible. For more information, please contact us.

*** MIL – type or Lockable connectors above can be integrated with our LCD displays. Sale service just for connectors not provided.
The company reserves the right to modify product specifi cations without prior notice and assumes no responsibility for any error which may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2022 Austin Hughes Electronics Ltd. All rights reserved.

UM-CV-751-RP-920-Q322V1
www.austin-hughes.com

References

• Austin Hughes | Data Center Solutions, Server Rack Power Management, Rack Access, KVM Switch
• UltraView Large (55"/ 43"/ 32") 4K Professional LCD Video | Resources | Austin Hughes

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>