AUSTIN-HUGHES RP-K117 4K LCD Console Drawer User Manual

AUSTIN-HUGHES RP-K117 4K LCD Console Drawer

RP-K117

RP-K1417

Legal Information

First English printing, November 2020 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.

Safety Instructions

Please read all of these instructions carefully before you use the device. Save this manual for future reference.

• Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
• Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with temperatures not exceeding 40º Celsius (104º Fahrenheit).
• When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing damage to other equipment or injury to persons nearby.
• When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the power supply. Proper air convection is necessary to keep it from overheating.
• Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
• If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current labeled on the equipment’s electrical rating label. The voltage rating on the cord should be higher than the one listed on the equipment’s ratings label.
• Observe all precautions and warnings attached to the equipment.
• If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being damaged by transient over-voltage.
• Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled onto the power supply or on other hardware may cause damage, fire, or electrical shock.
• Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and invalidate its warranty.
• If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.

What the warranty does not cover

• Any product, on which the serial number has been defaced, modified, or removed.
• Damage, deterioration, or malfunction resulting from:
  • Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.
  • Repair or attempted repair by anyone not authorized by us.
  • Any damage to the product due to shipment.
  • Removal or installation of the product.
  • Causes external to the product, such as electric power fluctuation or failure.
  • Use of supplies or parts not meeting our specifications.
  • Normal wear and tear.
  • Any other causes which do not relate to a product defect.
• Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Re-position or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Before Installation

• It is very important to mount the equipment in a suitable cabinet or on a stable surface.
• Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture, and vibration.

Unpacking

The equipment comes with the standard parts shown in the package content. Check and make sure they are included and in good condition. If anything is missing or damaged, contact the supplier immediately.

How To Clean Your LCD Monitor

Caution :

• To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or plugging your monitor into an electrical outlet.
• When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can scratch or damage your display. Pressure damage is not covered under warranty.
• Use only cleaners made specifically for cleaning monitors and monitor screens. Cleansers not made to clean monitors and monitor screens can scratch the LCD display or strip off the finish.
• Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly onto the screen or case can cause damage that is not covered under warranty.
• Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood-based paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, please follow these steps :

• Disconnect the power cord.
• Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.

Cleaning Tough Marks and Smudges

To remove tough marks and smudges, please follow these steps :

• Disconnect the power cord.

• Spray a small amount of non-abrasive cleanser on a microfiber cloth.
  Caution: Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your microfiber cloth first, not directly on the parts you are cleaning.

• Gently wipe the surface. Use as little pressure as possible.

• Wait until your monitor is completely dry before plugging it in and powering it up.

Package Content

RP-K117 unit X 1

• Power cord X 1
• M6 screw, cage nut & cup washer X 8

RP-K1417 unit X 1

• 4A Power Adapter & Power cord X 1
• M6 screw, cage nut & cup washer X 8

Structure Diagram

1. LCD panel
2. Installation Slide
3. Audio speaker ( for SDI or HDMI option )
4. LCD OSD membrane
5. Carry handle to release the 2-pt lock
6. 2-point lock

Dimension – RP-K117

Model

| Product Dimension (W x D x H)| Packing Dimension (W x D x H)|

Net Weight

| Gross Weight
---|---|---|---|---

RP-K117

| 441.6 x 480 x 44 mm

17.4 x 18.1 x 1.73 inch

| 588 x 758 x 120 mm

23.1 x 29.8 x 4.7 inch

| 11 kg

24.2 lb

| 15 kg

33 lb

Note: The weight is only for pure models. It varies with accessories & options such as SDI, HDMI, touchscreen & DC power.

Dimension – RP-K1417

Model

| Product Dimension (W x D x H)| Packing Dimension (W x D x H)|

Net Weight

| Gross Weight
---|---|---|---|---

RP-K1417

| 441.6 x 400 x 44 mm

17.4 x 15.7 x 1.73 inch

| 588 x 758 x 120 mm

23.1 x 29.8 x 4.7 inch

| 8.7 kg

19.1 lb

| 13.7 kg

30.1 lb

Installation – How to install

• Step 1:
  Insert the left and right rear mounting brackets into the display drawer.

• Step 2:

  • Measure the depth of the front and rear mounting rails.
  • Align each rear mounting bracket to a suitable length.

• Step 3: Complete the installation
  Fix the display drawer into the rack.

Note: M6 screw, cage nut & cup washer x 8 are provided.

Product Specifications

LCD

Panel

| | RP-K117 / RP-K1417
---|---|---
Native Resolution| 3840 x 2160@60Hz
Panel Size ( diagonal )| 17.3-inch TFT color LCD
Brightness ( cd/m² )| 400
Contrast Ratio ( typ. )| 1000:1
Colors| 16.7 M, 8-bit
Viewing Angle ( L/R/U/D )| 89/89/89/89
Response Time ( ms )| 16
Dot pitch ( mm )| 0.0995
Display Area ( mm )| 382.12 x 214.94V
Surface treatment| Anti-glare
Surface hardness| 3H
Backlight Type| LED
MTBF ( hrs )| 15,000
Video| Package| DP 1.2     / HDCP 1.3
---|---|---
Option| HDMI 2.0 / HDCP 2.2
Power| Power Supply| Range| Auto-sensing 100 to 240VAC,

50 / 60Hz

---|---|---|---
Power Consumption| Screen ON| Max. 21W
Power saving mode| Max. 2W
Power button OFF| Max. 1W
Compliance| EMC| FCC & CE certified
---|---|---
Safety| CE / LVD certified
Environment| RoHS3 & REACH compliant
Environmental Conditions| Operating| Temperature| 0 to 55°C degree
---|---|---|---
Humidity| 20~90%, non-condensing
Altitude| 16,000 ft
Storage / Non-operating| Temperature| -20 to 60°C degree
Humidity| 5~90%, non-condensing
Altitude| 40,000 ft
Shock| 10G acceleration (11ms duration)
Vibration| 10~300Hz 0.5G RMS random
Physical

Specification

| | RP-K117| RP-K1417
---|---|---|---
Product ( W x D x H )| 442 x 480 x 44 mm| 442 x 400 x 44 mm
17.4 x 18.9 x 1.73 inch| 17.4 x 15.7 x 1.73 inch
Packing ( W x D x H )| 588 x 758 x 120 mm| 588 x 758 x 120 mm
23.1 x 29.8 x 4.7 inch| 23.1 x 29.8 x 4.7 inch
Net Weight| 11 kg / 24.2 lb| 8.7 kg / 19.1 lb
Gross Weight| 15 kg / 33 lb| 13.7 kg / 30.1 lb

All dimensions stated are subject to change if options are selected/integrated to base model part codes

In some circumstances, if the user connects the LCD to the PC via HDMI port or video and audio signals, the LCD may display incorrectly on a full screen. If so, please adjust the display card setting on display size to fix the issue.

On-screen Display Operation ( OSD )

On-screen Display Operation ( OSD )

1. Picture

   • Brightness : Adjust the screen brightness}
   • Contrast : Adjust the difference between the image background ( black level ) and the foreground ( white level )
   • Black level: Adjust background black level of the screen
   • Eco: Screen in power-saving mode

2. Position

   • Picture size: Adjust the image size Full Screen / 4:3 / 5:4 / Pixel to Pixel
   • DP version: Select the DP version

3. Color

   • Color temperature : User / Warm / Cool / 5400k mode and Red / Green / Blue color balance
   • Sharpness: Adjust the image from weak to sharp
   • Hue: Adjust the screen hue value
   • Saturation: Adjust the saturation of the image color
   • Dynamic luminous control: Control the dynamic brightness

4. OSD Set

   • OSD H-Position: Align the screen image left or right
   • OSD V-Position: Align the screen image up or down
   • OSD time out: Adjust the screen timeout
   • OSD Transparency: Adjust the screen transparency
   • OSD size : Adjust the screen size – Normal / Small
   • OSD rotation : Rotate the screen – 90° / 180° / 270°

5. Reset

   • Reset: Return the adjustment back to the factory setting

6. PIP

   • PIP mode: Enter into PIP  PBP setting – PIP MODE
     PBP 2WIN ( Main screen + 1 sub screen )
     PBP 3WIN ( Main screen + 2 sub screen )
     PBP 4WIN ( Main screen + 3 sub screen )
     Select the signal input of each sub-screen

   • PIP size: Adjust the size of the Sub screen Small / Medium / Large / Huge

   • PIP position: Adjust the position of the Sub screen  Top Left / Top Right / Bottom Left / Bottom Right

   • Swap: Swap the input signal of the PIP / PBP subscreen

7. MISC

   • Signal source: Select the signal source – DP / HDMI1 / HDMI2
   • Mute: Turn off the surrounding sound
   • Audio in : Auto / Line in / DP
   • Volume: Adjust the volume of sound
   • Sleep mode : Set the off time – 10 min / 20 min / 30 min / 50 min / 60 min / 120 min / 240 min

Options on the Reset page

• Rotation : Rotate the image in Full screen or 1:1 – 90° / 180° / 270°
• Picture size : Adjust the image size in Full screen or 1:1

Options : 3G / HD / SD-SDI input

Austin Hughes’ SDI input is an ideal solution for the broadcast- grade video and high-resolution CCTV market. Designed for use with CyberView displays, an SDI input module can support up to 1080p @60Hz resolution without using additional space or power and it comes standard with a 2-year warranty.]

ITU-R BT.656

---|---|---
Audio| SMPTE 299M / 272M-C
Compatible Video Format| 3G-SDI| 1080p

1080p

1080i

720p

| @60 / 50Hz, 4:2:2 @30 / 25 / 24Hz, 4:4:4 @60 / 50Hz, 4:4:4

@60 / 50Hz, 4:4:4

---|---|---|---
HD-SDI| 1080p

1080i

720p

| @30 / 25 / 24Hz, 4:2:2 @60 / 50Hz, 4:2:2

@60 / 50Hz, 4:2:2

SD-SDI| 480i| @60Hz, 4:2:2
ITU-R BT.656| 576i| @50Hz, 4:2:2
Compatible Audio Format| 3G-SDI| 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
---|---|---
HD-SDI| 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
SD-SDI| 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized / Asyn-

chronized Video

Max. Transmission Distance 75 ohm coaxial cable| 3G-SDI| 150m at 2.97Gb/s
---|---|---
HD-SDI| 250m at 1.485Gb/s
SD-SDI| 480m at 270Mb/s

HDMI 2.0 ( HDCP 2.2 )

• In some circumstances, if the user connects the LCD to the PC via an HDMI port for video and audio signals, the LCD may display incorrectly on a full screen. If so, please adjust the display card setting on display size to fix the issue.

Touchscreen & driver

K17″ USB Touchscreen Specification

• RP-K117 Dimension will be changed if touchscreen required
• USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline, and CD disc
• For detailed information, please refer to the attached CD disc
• As the touchscreen unit is not made of toughened glass, please handle it carefully

Touchscreen & driver

TRB Driver: Please follow the below steps to set up the touch screen:-

• Step 1. Run the bundled CD disc or download the driver from the link below: http://www.austin-hughes.com/resources/driver/rackmount-display
• Step 2. Double click the Setup.exe
• Step 3. Follow the installation instruction to finish the setup
• Step 4. After installation, run the TouchKit program & the “4 point calibration”

Note: Please do the initial calibration after the first setup

DC Power

For DC power option :

1. If the unit with LCD, earthing may be required
2. DC option excludes AC power adapter and power cord.
3. RP-K117 Dimension will be changed if DC power required

Post Rack Mounting Brackets

Step 1

• Before applying 2-post rack brackets, please release front mounting ears and rear mounting wheels.
• Attach left and right mounting brackets drawer with the screws below: 6#323.5 mm screw x 8 ( only for front ) 6#324.5 mm screw x 6 ( only for rear )

Step 2

• Attach the set of 4 mini brackets to the 2-post rack.
• M6 screw set is not provided.

Step 3

• Insert the drawer into the mini brackets.

Step 4

• Fix the LCD console drawer to the mini brackets with 6#32*4.5 mm screw x 8.
• Installation completed

Note: This step is necessary for the front. Failure to complete this will cause damage.

The company reserves the right to modify product specifications without prior notice and assumes no responsibility for any error which may appear in this publication. All brand names, logo,s and registered trademarks are properties of their respective owners. Copyright 2021 Austin Hughes Electronics Ltd. All rights reserved.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>