REVOPOINT Smart S1 Handheld Stabilizer User Manual

October 29, 2023
REVOPOINT

REVOPOINT-Smart S1-Handheld-Stabilizer -LOGO

REVOPOINT Smart S1 Handheld Stabilizer

REVOPOINT-Smart S1-Handheld-Stabilizer -PRODUUCT-image

Product Introduction

The S1 Handheld Stabilizer’s gyroscopes provide high-precision stabilization for handheld scanning, helping to avoid loss of tracking and providing a smoother scan. The motorized axes allow you to smoothly pan or tilt the scanner as you move around the object.

Specifications

Product Name Handheld Stabilizer
Model S1
Compatible Devices MINI
Power Output 5V/2A
Dimension 213mm x 84.5mm x 45mm
Net Weight 510g
Battery Type Lithium
Battery Capacity 4000mAh
Operating Time Around 6 hours
Recharging Time 4.5 hours
Stabilized Axes 2
Controllable Range Tilt ±45°; Pan ±85°
Connection Type Bluetooth
Charging Port Type USB Type-C
Working Temperature 10°C‒40°C
Package List Handheld Stabilizer x1, Type-A to C USB Cable x1, Bracket x1,

Strap x1
*** Note| Operating time may vary depending on different scenarios and environments.

Functions Overview

REVOPOINT-Smart S1-Handheld-Stabilizer-01

  1. Bluetooth LED: The LED light flashes blue continuously while waiting for a connection. Once connected successfully, the LED turns solid blue.
  2. Joystick: Adjusts the tilt and pan.
  3. 1/4 Threaded Hole: To mount the phone holder bracket.
  4. ON/OFF Switch: Long-press to power on/off the Handheld Stabilizer. Press twice to change between Follow/Lock Mode.
  5. Battery Level LED: Shows the remaining battery level. The LED light flashes continuously when charging and turns solid white when fully charged.
  6. Start/Pause Button: Press to start or pause the scan. Press twice to reenter the Handheld Stabilizer.

Charging the Handheld Stabilizer

  1. Connect the USB-Type A end of the cable to an adapter, then plug it into a socket.
  2. Plug the USB-Type-C end into the Handheld Stabilizer’s Type-C port.
  3. The Handheld Stabilizer is fully charged when the battery LED turns solid white.

REVOPOINT-Smart S1-Handheld-Stabilizer-02

Connecting the Handheld Stabilizer to MINI 3D Scanners

  1. Clip the MINI into the quick-release slot on top of the Handheld Stabilizer.
  2. Connect and secure the Micro-B USB cable to the scanner.

REVOPOINT-Smart S1-Handheld-Stabilizer-03

For freedom of movement, connecting the MINI via Wi-Fi is recommended when using the Handheld Stabilizer.

Using the Handheld Stabilizer with a PC via Wi-Fi

  1. Power on the Handheld Stabilizer
    Long-press the ON/OFF button to power on the Handheld Stabilizer. The Bluetooth LED flashes blue continuously when it is ready for connection.

  2. Adding the Handheld Stabilizer via Bluetooth
    Open your PC’s Bluetooth settings and look for a device named “REVO_STABILIZER”, then click Connect to add the Handheld Stabilizer.

  3. Connecting to a PC’s Wi-Fi with MINI
    Open the PC’s Wi-Fi settings and connect to the MINI’s Wi-Fi SSID.

  4. Open Revo Scan to Start your Scan

  5. Adjust the scanner’s position with the Handheld Stabilizer joystick.

  6. Press the Handheld Stabilizer’s Start/Pause button to begin scanning.

Using the Handheld Stabilizer with a Smartphone via Wi-Fi

  1. Attaching the bracket and phone holder

  2. Insert and screw the bracket into the Handheld Stabilizer’s 1/4 threaded hole.

  3. Attach the Phone Holder to the bracket

  4. Insert your phone into the clamp.
    REVOPOINT-Smart S1-Handheld-Stabilizer-04 Note: Use the Phone Holder that came with your MINI

  5. Connecting to a smartphone’s Wi-fi with MINI
    Open the smartphone’s Wi-FI settings and connect to the MINI’s Wi-Fi SSID.

  6. Open Revo Scan to Start your Scan

  7. Adjust the scanner’s position with the Handheld Stabilizer joystick.

  8. Press the Handheld Stabilizer’s Start/Pause button to begin scanning.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals