StyleWell A601008703 Brown Woodgrain Frame 80QT White Cooler User Guide
- June 4, 2024
- StyleWell
Table of Contents
StyleWell A601008703 Brown Woodgrain Frame 80QT White Cooler
THANK YOU
We appreciate the trust and confidence you have placed in StyleWell through
the purchase of this cooler. We strive to continually create quality products
designed to enhance your home. Visit us online to see our full line of
products available for your home improvement needs. Thank you for choosing
StyleWell!
Important Safety Instructions
SAVE THESE INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
- Some parts may contain sharp edges. Wear protective gloves.
- When assembling and using this product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Please read all instructions before assembly and usage.
- DANGER: Keep children and parts away from the assembly area.
- CAUTION: Do NOT over tighten any of the bolts or nuts.
- WARNING: To avoid destroying the finish, please handle the surface by using a soft cloth Instead of your bare hands.
Due to the nature of Iron, surface oxidation (rusting} will occur If these protective coatings are scratched. We recommend Immediate touch-up with rust Inhibiting paint (not Included}.
1 YEAR WARRANTY
WHAT IS COVERED
This limited warranty is extended to the original purchaser and applies to
defects in materials and workmanship of your item provided the
item is maintained with care and used only for personal, residential purposes.
The item is warranted to be free from defects in material or
workmanship for a period of 1 year.
WHAT IS NOT COVERED
We do not reimburse for transportation of delivery costs, or compensate the
individual or any outside party for assembling or disassembling the product.
Contact the Customer Service Team at
1-877-527-0313 or visit
www.HomeDepot.com. Production Number: 2022200001
Pre-Assembly
PLANNING ASSEMBLY
Before beginning assembly of this product, make sure all parts are present.
Compare parts with the Hardware Included and Package
Contents lists. If any part is missing or damaged, do not attempt to assemble
the product. Contact customer service for replacement parts.
NOTE: Tools and protective articles below are not provided.
ADDITIONAL TOOLS REQUIRED (NOT INCLUDED)
IMPORTANT
This assembly requires at least one people. Approximate assembly time: 30
minutes .
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
t
PACKAGE CONTENT
PACKAGE CONTENTS
t
Assembly
Attaching the Legs
Attach the legs (G/J) to cooler body (C) using bolts (H2) and washers (H4).
Use allen wrench (HW1) to loosely tighten the bolts.
Attaching the Baseboard
Attach the baseboard (K) to the assembled legs (G/J) using bolts (H2) and
washers (H4). Use allen wrench (HW1) to tighten the
bolts.
Attaching the Casters
Connect the casters (UM) with the assembled legs (G/J). Use wrench (HW2) to
fully tighten all the casters.
Attaching the Handle
Attach the handles (A) to the obverse side of the lid (B) using bolts (H1).
Attaching the Accessories
- Remove the bolts {H1) from the cooler body {C).
- Attach the bottle opener {E) to the cooler body {C) using bolts {H1).
- Insert the bucket {F) into the clips located on the cooler body {C).
Care and Cleaning
- Before using, clean the cooler completely with a soft dry towel.
- Do not use harsh abrasives or cleaners.
- When not in use, store in a cool, dry area.