StyleWell HDFP48-53E Stanwich 48 Inch Freestanding Electric Fireplace TV Stand Instruction Manual

StyleWell HDFP48-53E Stanwich 48 Inch Freestanding Electric Fireplace TV

Stand

Product Information

The StyleWell Stanwich 48 Coil Media Electric Fireplace is a home appliance designed to enhance your home’s ambiance. The electric fireplace/heater is modelled as HDFP48-53E and HDFP48-53AE and comes with assembly instructions and hardware. It has a maximum recommended weight load of 31.8 kg/70 lb and can fit up to most 147.3 cm/58 in. diagonal flat-panel TVs. The fireplace has a warranty period of one year from the date of purchase.

Product Usage Instructions

Before assembling or using the electric fireplace, read and understand the instructions provided in the manual. Keep the manual for future reference. Follow the below instructions for proper usage:

Safety Information
Ensure that you read and understand the safety instructions before using this product.

Maximum Recommended Weight Loads
Ensure that the maximum recommended weight load of 31.8 kg/70 lb is not exceeded and that the TV is placed behind the stopper.

Warranty
If the product is defective in workmanship or materials or fails under normal use, repair or replacement is available for a period of up to one (1) year from date of purchase. Contact the Customer Service Team at 1-877-527-0313 or visit www.HomeDepot.com.

Pre-Assembly
Compare all parts with the Hardware Included and Package Contents list. If any part appears missing or damaged, do not assemble this product and contact the Customer Service Team at 1-877-527-0313.

Tools Required
You will need a Phillips screwdriver (not provided) to assemble the product.

Hardware Included
Ensure that all the parts are included as per the Hardware Included list.

Assembly
Follow the assembly instructions provided in the manual to assemble the product.

Care and Maintenance
After assembly, regularly clean the fireplace trim and care for wood furniture.

Questions, problems, missing parts?
Before returning to the store, call Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM.

THANK YOU
We appreciate the trust and confidence you have placed in StyleWell through the purchase of this electric fireplace/heater. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing StyleWell!

Safety Information

Please read and understand these instructions before assembling and using this console. Save these instructions for future reference.

MAXIMUM RECOMMENDED WEIGHT LOADS

WARNING:
This unit is not intended for use with CRT TVs. Use only with flat panel TVs and audio/video equipment meeting recommended size and weight limits. Never use with larger/heavier than recommended flat panel TVs or equipment. To avoid instability, place flat panel TV in the centre of the unit; the base of the television must be able to rest on the supporting surface of the unit without over-hanging the edges. Improperly positioned flat panel TVs, or flat panel TVs or other equipment that exceed recommended size and weight limits could fall off or break the unit, causing possible serious injury.

Warranty

We are confident that you will be delighted with this purchase. Should this product be defective in workmanship or materials, or fail under normal use, we will repair or replace it for a period of up to one (1) year from date of purchase.
This warranty gives you specific rights and you may also have other rights which vary from state to state. Contact the Customer Service Team at 1-877-527-0313 or visit www.HomeDepot.com.

Pre-Assembly

PLANNING ASSEMBLY
Compare all parts with the Hardware Included and Package Contents list. If any part appears missing or damaged, do not assemble this product and contact the Customer Service Team at 1-877-527-0313.

TOOLS REQUIRED

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

PACKAGE CONTENTS

Assembly

Preparing media shelf and base assembly

NOTE:
Do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier.

• Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted floor or the empty carton to avoid any scratches.
• Securely screw the cam bolts (DD) into the designated small holes on the media shelf (L), bottom panel (M), front skirting (O), left and right skirtings (P and Q) using a Phillips screwdriver. DO NOT overtighten the cam bolts.

Gluing wood dowels

NOTE:
Refer to the dowel assembling guide drawings in this step for further clarification on how to properly glue in the wooden dowels. Apply this method whenever instructed to install wood dowels. It is very important to use a small amount of glue on both ends of dowels and wipe off the excess glue immediately with a damp cloth.

• Glue the wood dowels (BB) into the designated holes on the middle crossbar (A1) and skirting boards (N, O, P and Q) as shown.

Attaching middle crossbar

NOTE:
Refer to the cam lock assembling guide drawings in this step for further clarification on how to properly install cam locks. Apply this method whenever instructed to install cam locks.

• Attach the middle crossbar (A1) to the media shelf (L) by engaging three cam locks (CC).

Attaching rear skirting

• Attach rear skirting (N) between the side skirtings (P and Q) by engaging two cam locks (CC).

Attaching front skirting

• Align and attach front skirting (O) to both side skirtings (P and Q) using two cam locks (CC).

Installing base

• Using the wood dowels (BB) as a guide, align and attach the previous assembly to the bottom panel (M) by engaging eleven cam locks (CC).

Preparing bottom panel assembly

• Securely screw four cam bolts (DD) into the designated small holes on the top of bottom panel (M) using a Phillips screwdriver.

Attaching middle trims

• Glue two wood dowels (BB) into the inner holes on each middle trim (C1).
• Fasten the middle trims (C1) to the lower partition panels (W and X) respectively, using two medium flat head screws (FF) per trim.

Gluing wood dowels

• Glue the wood dowels (BB) into the inner holes on both lower side panels (V) and the lower partition panels (W and X) as shown.

Attaching side panels

• Align and attach both lower side panels (V) to the bottom panel (M) by engaging four cam locks (CC).

Attaching lower partition panels

• Using the wood dowels as a guide, firmly press the assembled lower partition panels (W and X) to the bottom panel (M) and fasten them in place with four long flat head screws (GG).

Attaching media shelf

• Place media shelf (L) onto the inserted wood dowels (BB) on the vertical panels (V, W and X) properly and fasten it in place by engaging eight cam locks (CC).

Preparing upper side panels and partition assembly

• Ask for assistance to lift the previous assembly upright, securely screw the cam bolts (DD) into the designated small holes on the media shelf (L) using a Phillips screwdriver.

Preparing top panel and upper moldings assembly

• Securely screw the cam bolts (DD) into the designated small holes on the top panel (K) and upper moldings (R and T) using a Phillips screwdriver.

Gluing wood dowels

• Glue the wood dowels (BB) into the inner holes on the upper front moldings (R), upper side panels (S), upper partition panel (U) and top reinforcement (Z) as shown.

Combining upper panels with moldings

• Attach one upper front molding (R) to one upper side panel (S) by engaging two cam locks (CC) as shown.
• Complete this step two times to assemble two upper side panels (S).
• Attach the upper partition molding (T) to the upper partition panel (U) by engaging two cam locks (CC) as shown.

Attaching top reinforcement

• Align and attach the top reinforcement (Z) to the top panel (K) by engaging two cam locks (CC) as shown.

Attaching upper side panels and upper partition panel

• Align and attach the assembled side panels (S) and upper partition panel (U) to the top panel (K) by engaging two cam locks (CC) in each panel.

Fastening top reinforcement

• Using the pilot holes as a guide, attach two mending plates (II) at the joints where the top reinforcement (Z) meets the upper front moldings (R) with two short flat head screws (EE) per plate.
• Using the pilot holes as a guide, attach the small L-shaped bracket (JJ) at the joints where the top reinforcement (Z) meets the middle rail of the top panel (K) with two short flat head screws (EE).

Attaching assembled upper panels

• Place the assembled upper panels onto the cam bolts on the media shelf (L) properly and fasten them in place by engaging six cam locks (CC).

Installing back panels

• Now, go back and securely tighten all the cam locks and screws. Make sure all the parts are tight and there are no gaps between the parts. This will help keep the unit square.
• Ask for assistance to flip around the previous assembly at its front edges.
• Pick up the upper back panel (D1) and align the pre-drilled holes against the upper long edge of the pilot holes on the back of top panel (K). Fasten it in place with the provided washer head screws (HH).
• Using the pilot holes as a guide, align and attach the side back panels (B1) to the mantel frame with the washer head screws (HH).
  NOTE: We recommend attaching back panel with the screws at the corners first.

Installing door hinges and handles

• Extend two door hinges (SS) and rest the hinge cups onto the cutouts of each door (Y). Secure the door hinges (SS) in place by using two nickel screws (TT) in each hinge.
• Attach one handle (KK) to the front side of each door (Y) with two handle bolts (LL).

Attaching door panels

• Ask for assistance to lift the assembly unit upright and position it near the final location.
• Pick up one door (Y) and fasten the hinge bases onto the left side panel (V), using the pilot holes as a guide.
• Repeat the same process to attach the other door (Y) to the right side panel (V).
• Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the screws for a good fit. Refer to the hinge sticker on door for adjustment.

Installing adjustable shelves

• Open the doors and insert four shelf supports (MM) into the holes at the desired height inside each side compartment. Make sure you place the four shelf supports at the same level to make the shelf level.
• Tilt and rest the adjustable shelves (F1) onto the shelf supports (MM) and fasten them into place with the short flat head screws (EE).

Attaching paper stickers and the rubber bumpers

• Put the paper stickers (RR) onto the visible cam locks and screws.
• Stick the rubber bumpers (NN) on the outer corners of doors where the lower partition panels (W and X) are in contact with.

Attaching upright arms

NOTE: Use a hand screwdriver, not a power driver to assemble the fireplace insert. See BILT for video instructions.

• See Figure A: Fasten the upper 2 screws (AA) through the upright arm (C) into the heater (A) until tight.
• See Figure B: Fasten lower 2 screws (AA) into the upright arm (C) until tight.
• Fully tighten all 4 screws (AA) one final time.
• Repeat the same process with the upright arm (B).
  WARNING: Do not lift or transport the heater by using upright arms .

Attaching logs to ember bed

IMPORTANT: Carefully follow the 2 steps below for inserting each log.

1. Install left log (F) into left hole of ember bed (E) by inserting front edge of the log base into front notches of ember bed hole.
2. Then tilt the log back to insert the rear edge of the log base into rear notches of ember bed hole (press down log firmly to lock into position).
   • Repeat the above process for the right log (G).

Positioning ember bed

• Set the ember bed (E) onto the heater (A) as shown.
• Push ember bed forward against the front flange of heater.
• Position the USB cable as shown below.

Attaching wall panel

• Fold the wall panel (H) as shown. Then position yourself at back side of heater (A).
• Hold wall panel (H) at the angle shown below and insert lower back edge into metal slots on back of heater (A).
• Tilt wall panel (H) forward until bottom corner inserts into lower U-channels on both upright arms (B and C).
• Continue to tilt wall panel (H) forward until the top corner inserts into upper U-channels on both upright arms (B and C).

Connecting ember bed cable to heater

• Fully plug the USB connector of the ember bed (E) into the back port of heater (A).

Inserting the glass

• Slide the glass (I) into the inner U-channels on both upright arms (B and C) until the glass sits onto the heater (A). If needed, push top of upright arms in or out to accommodate glass. Make sure the top of the glass (I) is flush with the top of both upright arms (B and C).

Positioning connector strap

• Position top connector strap (D) over the glass (I) and upright arms (B and C). Follow orientation shown below.

Attaching connector strap

• Fasten connector strap (D) to both upright arms (B and C) using two screws (AA) as show below. Holes must be in line for screw to pass through.

Finishing fireplace insert assembly

• The firebox is now ready for the next assemble step.

Installing fireplace insert

• Lift the fireplace insert carefully into the back of the assembled mantel and center it on the bottom panel in the opening.
• Use the pilot holes as a guide, fasten two large L-shaped brackets (OO) onto the firebox support (E1) with four pan head screws (PP). Make sure that the right angle side is flush with the short edge of firebox support (E1).
• Use the pilot holes as a guide, fasten the firebox support (E1) between the partition panels (W and X) with four pan head screws (PP).

Installing the acrylic stopper

• Remove the paper backing of the acrylic stopper (QQ), then properly align the acrylic stopper into the cutout on the acrylic stopper template on the front of the top panel (K). Press down on the acrylic stopper to help adhesion.
  NOTE: To prevent your TV from tipping, you must install the acrylic TV stopper if you place a flat-panel television on the top panel. Otherwise, skip to the next step.

• At the back of the top panel (K), grip the heads of plastic tacks with pliers, with a twisting motion pull the tacks loose to remove the acrylic stopper template.

Installing the tipping restraint hardware

WARNING:
Young children can be seriously injured by tipping furniture. You must install the tipping restraint hardware with the unit to prevent the unit from tipping, causing any accidents or damage. The tipping restraints are intended only as a deterrent, they are not a substitute for proper adult supervision. The tipping restraints are not earthquake restraints. If you wish to add the extra security of earthquake restraints, they must be purchased and installed separately.

• With assistance, position the assembled fireplace at the desired location against a wall. If necessary, adjust the pre-attach floor levelers by hand to correct tilting and level the doors, until the unit is level.
• Follow the instructions printed on the plastic bag containing the tipping restraint hardware to attach the tip-over restraints to the unit and the wall.
• Connect the fireplace to the power transformer. Follow the operating manual for the electric fireplace insert to control your fireplace.

WARNING

• Unit must be placed on a level surface or leveled with included hardware (when applicable).
• Do not sit or stand on or allow children to climb, sit or stand on the assembled product.
• For safety reasons, it is imperative that this unit be mounted to the wall or floor.
• Unit can tip over causing severe injury or death.
• Never open more than one drawer at a time.
• Do not exceed the recommended weight limits.
• Before cutting, drilling or hammering into any wall or floor surface, verify the location of electrical, plumbing and gas lines. Cutting may cause serious injury.

Care and Maintenance

A touch-up pen has been provided to minimize the small nicks or scratches that may occur during assembly or shipping.

To clean and care for your furniture:

• Use a soft, clean cloth that will not scratch the surface when dusting.
• Use of furniture polishes is not necessary. Should you choose to use polishes, test first in an inconspicuous area.
• Using solvents of any kind on your furniture may damage the finish.
• Never use water to clean your furniture as it may cause damage to the finish.
• Always use coasters under beverage glasses and flowerpots.
• Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
• Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create spotting within the furniture finish.
• In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a professional to repair your furniture.
• Check bolts/screws periodically and tighten them if necessary.

CARING FOR WOOD FURNITURE
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity changes can cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from direct sunlight as sun may damage the finish. Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will enhance your furniture as it ages.

CLEANING THE FIREPLACE TRIM

Clean the metal trim using a soft cloth, slightly dampened with citrus oil- based product and buff with a clean soft cloth. DO NOT use brass polish or household cleaners as these products will damage the metal trim. Citrus oil- based products can be obtained at supermarkets or hardware stores.

Questions, problems, missing parts? Before returning to the store, call StyleWell Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday 1-877-527-0313
HOMEDEPOT.COM.
Retain this manual for future use.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>