StyleWell 29256 58.2 Inch Unfinished Pine 4-Shelf Standard Bookcase Instruction Manual
- June 3, 2024
- StyleWell
Table of Contents
StyleWell 29256 58.2 Inch Unfinished Pine 4-Shelf Standard Bookcase
Instruction Manual
THANK YOU
We appreciate the trust and confidence you have placed in StyleWell through
the purchase of this Basic Bookcase . We strive to continually create quality
products designed to enhance your home. Visit us online to see our full fine
of products available for your home improvement needs. Thank you for choosing
StyleWell!
Safety Information
DANGER
- Keep small parts away from children during assembly.
- Read and follow instructions carefully.
WARNING
- Read these instructions carefully and keep in a safe place.
- TO GUARANTEE THE SAFE USE OF THIS PRODUCT, FOLLOW THE WARNINGS, GUIDELINES AND RECOMMENDATIONS IN THIS MANUAL.
- Adult assembly required.
- Small parts may present choking hazard prior to assembly. Do not stand, step or climb on unit.
- Unit must be placed on a level surface or leveled with included hardware (when application).
- Do not sit on or allow children to cIimb,sit or stand on the assembled product.
- For safety reasons,it is imperative that this unit be mounted to the wall.
- Do not use without installing the tip restraint. Unit can tip over causing severe injury or death. Never open more than one drawer at a time.
- Do not exceed the recommended weight limits. Evenly distribute the weight on each level and always keep the heavier loads on the bottom.
- Before cutting,driIIing or hammering into any wall or floor surface, verify the location of electrical, plumbing and gas lines. Cutting may cause serious injury.
CAUTION
- Do not use power tools to assemble your furniture. Power tools may strip or damage parts/product.
- Do not overtighten connectors(screws, bolts, etc.). Overtightening can lead to product damage.
- Be sure to check all packing materials carefully for small parts that may have come loose inside the carton during shipment. If parts are missing, contact THE HOME DEPOT to obtain any missing parts.
- DO NOT USE SUBSTITUTE PARTS.
- This product should only be used on a flat, level surface. Product is designed to hold 10 Kg.
Exceeding this limit may damage the product or cause injury to the user.
Warranty
1 YEAR WARRANTY
WHAT IS COVERED
We guarantee this product to be free of manufacturing defects to the original purchaser for one year.
WHAT IS NOT COVERED
This warranty does not cover commercial use, acts of nature, and abusive use.
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface
such as carpet or cardboard.
NOTE: More than open person may be required to assemble this product.
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description | quantity |
---|---|
8X30 Wooden dowel | |
BB | 3.5×30 Screw |
CC | 6X44 Screw mini-fix |
DD | 14×10 Case mini-fix |
EE | 4.0×40 Screw |
FF | 8×8 Nail |
GG | 4.0×40 Screw |
HH | 6×12 Shelf Support |
I I | 3.0×16 Screw |
JJ | 100×5 Plastic profile |
KX | 16×5 Washer |
LL | 6×20 Wall plastic dowel |
MM | 120mm Wall Strap |
NN | Glue |
oo | 19×20 Nail in caps |
PACKAGE CONTENTS
Part | Description | quantity |
---|---|---|
A | Top Panel | 1 |
B | Right Side | 1 |
C | Left Side | 1 |
D | Shelf | 3 |
E | Fix Shelf | 1 |
F | Side Rail | 2 |
G | Base Panel | 1 |
H | Rail | 1 |
Back Panel | 2 | |
J | Front Rail | 1 |
Basic Bookcase Assembly
-
Placing the fittings on the right side panel
-
Placing the fittings on the left side panel
-
Attaching the shelves left side panel
-
Attaching the right side panel to the shelves
-
Attaching the front rail to the top panel
-
Connecting the top panel and placing the floor protection on the side panels
-
Attaching the side rails and rail to the bookcase
-
Adding the adjustable shelves on the Bookcase
-
Attaching the panels the bookcase
Important: Cabinet Must be ‘square’ when back panel is attached
Important: Use all back panels nails. Evenly spaced, they help make the unit strong.
-
Placing the tipover restraint
Important: Position the furniture into place and make a mark to the wall, as shown -
Placing the Tipover restraint
Important: With help,carefuIIy move the furniture away to access the mark in the wall. Drill hole on wall 4cm below the mark, as shown in the diagram.
Important: Before drilling, check wall for hidden pipes and cables.
-
Placing the Tipover restraint
Important: With help, carefully move the furniture back to position and insert wall strap into slot on the top panel as shown. -
Placing the Tipover restraint
Important: Inside the cabinet, hold wall strap in position and fix it using washer and screw , as shown.
Care and Cleaning
- For best results, clean the furniture with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate.
- Do not clean with abrasive materials, bleach, or solvents.
- Store the furniture in a dry, sheltered place when not in use.
- Keep the furniture away from fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.
Questions, problems, missing parts?
Before returning to the store,call Customer Service.
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM
Retain this manual future use.