Yealink AVHub Meeting Audio and Video Processor User Guide

June 9, 2024
Yealink

AVHub
Quick Start Guide
Meeting Audio & Video ProcessorYealink AVHub Meeting Audio and Video
Processor

Package Contents

We recommend that you use the accessories provided or approved by Yealink. The use of unapproved thirdparty accessories may result in poor performance.

Hardware Interface Instructions

Yealink AVHub Meeting Audio and Video Processor -
Interface

❶ LED Indicator: different status of the AVHub.| ❻ RCA In: connect to an audio input device via a RCA cable.
---|---
❷ USB-A Port| ❼ RCA Out: connect to an audio output device via a RCA cable.
❸ USB-B Port| ❽ 6.3 mm Line-in Port
❹ Codec Port| ❾ 6.3 mm Line-out Port
❺ VCH Port| ❿ DC48V: connect to the power adapter.

LED Indicator Instructions

MVC Mode

LED Status Description

LED indicator off
Solid red
Fast flashing red
Solid orange
Fast flashing orange
Solid green| The AVHub is powered off.
The AVHub is in sleep status.
The PC is not connected after the AVHub is powered on.
Resetting the AVHub.
The AVHub is starting up.
The AV-Hub is upgrading firmware.
The AVHub is working.

VCS Mode

LED Status Description

LED indicator off
Solid red
Fast flashing red
Solid green
Fast flashing green
Solid orange| The AVHub is powered off.
The VCS device is in sleep status.
After the AVHub is powered on, the VCS device is not connected
to AVHub.
Resetting the AVHub.
The AV-Hub is upgrading firmware.
The AVHub is working.
The VCS audio device is adjusting volume or mute
The AVHub is starting up.

AVHub Installation

  • Mount on the Wall
    Yealink AVHub Meeting Audio and Video Processor - Wall

  • Stick under the Table
    Yealink AVHub Meeting Audio and Video Processor -
Table

  • Put on the Desk

  • Mount on the Rackbghjg
    ❶ Install the mounting ears on both sides of the AVHub.
    Yealink AVHub Meeting Audio and Video Processor - Rack
    ❷ Push the AVHub into the rack, and then fix it to the rack with screws.
    Yealink AVHub Meeting Audio and Video Processor -
screws

Endpoint Connection

When you connect the UVC84/UVC86 directly to the AVhub, the total number of connections must be no more than 4 devices. If the total number of connections exceeds 4  devices, you need to connect a PoE switch (the PoE switch must meet the 802.3 AT (PoE+) standard)

  • VCS Deployment Solution

Yealink AVHub Meeting Audio and Video Processor - screws
2

MVC Deployment Solution

Yealink AVHub Meeting Audio and Video Processor -
Solution

Documents / Resources

| Yealink AVHub Meeting Audio and Video Processor [pdf] User Guide
AVHub Meeting Audio and Video Processor, AVHub, Meeting Audio and Video Processor, Video Processor
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals