CREALITY Sermoon D3 3D Printer User Guide

: June 9, 2024
: Creality

Table of Contents

CREALITY Sermoon D3 3D Printer
DEAR USERS,
General Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CREALITY Sermoon D3 3D Printer

DEAR USERS,

Thanks for choosing Creality 3D products. For your convenience, please read this quick guide carefully before use. You can obtain the relevant instructions and videos through the QR code, webpage link address, and USB disk before use, and follow the instructions strictly. Creality 3D team is always ready to provide high-quality services. No matter what problems you have during use, please contact us by the telephone and email provided at the end of the quick installation guide.

Method 1
Scan the QR code of “Creality Cloud” by your mobile phone. If it is your ﬁrst time using Creality Cloud, please register an account ﬁrst and ﬁll in the information according to the APP prompts; If you already have a Creality Cloud account, please log in directly.

Having: Creality New Product Information
Having: Creality Cloud Fun Printing
Having: Unboxing Information
(The user can ﬁnd the manual/unboxing video by searching the machine type)
Having: Service Support

QR code of Creality Cloud

Method 2
Log in Creality oﬃcial website with a computer
If it is more convenient for you to use a computer, log in to https://www.creality.com/download. You can also ﬁnd the manual/unboxing video and related equipment usage information on the homepage by entering the machine type.

https://www.creality.com/download

Method 3
USB Disk
Open the package of the machine, you can ﬁnd the USB disk from the toolbox, and get the product manual and related video materials through the computer.

(Note: The information on the USB Disk may not be the latest. It is recommended to use Method 1 and Method 2 to obtain the latest information .) CREALITY-Sermoon-D3-3D-Printer-FIG-3

Remove the top foam.
Remove the belt fasteners and move the extruder kit in the order shown.
Remove the foam that holds the Extruder.
Lift the transparent cover in order and then remove it in a horizontal position.
Remove the foam tray at the bottom of the transparent cover in the order shown in the figure.
Switch on the power.
After switching on the power, click on “Conﬁrm” and lift the printing platform.
Remove the bottom foam A from the platform in order shown in the figure.
Remove foam B from the bottom of the platform in order shown and click on “Confirm”.
Place the printing platform plate (to be placed tight against the printing platform).
Thread the thick Teflon Tube through the fixing hole from top to bottom, then the thin Teflon Tube on the Filament Detection module.

General Specifications

CREALITY-Sermoon-D3-3D-Printer-FIG-9

Reminder: For the manual and unboxing video, please refer to the accompanying information in the USB flash drive or visit the link to the official website https://www.creality.com/download.

Users should abide by the laws and regulations of the country and region where the equipment is located (place of use), abide by professional ethics, and pay attention to safety obligations. It is strictly forbidden to use our products or equipment for any illegal purpose.Our company is not responsible for the relevant legal responsibilities that the violator should bear.
Since each model is different, the actual product may be different from the picture. Please refer to the actual product. The final interpretation right belongs to Shenzhen Chuangxiang 3D Technology Co., Ltd.

3D Printing Evangelists
With the spirit of evangelists, we want to share the convenience of technology with everyone. 18th Floor, JinXiuHongDu Building, Meilong Road, Xinniu Community, Minzhi Street, Longhua District, Shenzhen City, China. Oﬃcial