atomi smart AT1900 Smart WiFi Color String Lights User Guide
- June 9, 2024
- Atomi Smart
Table of Contents
atomi smart AT1900 Smart WiFi Color String Lights User Guide
Get the app
Down loαd the Atomic Smart app from the app store or Google play.
Register
Get the opp Follow the on-screen instructior1s and register an account
Make sure to allow access to location(Android) Local Network(IoS).
**Register Plug in your Atomi Smart device
And confirm that the light are flashing red.
**If not flashing press and hold the power button for 10s to reset.
Add your Atomi Smart device Select the right network
Press add device or the”+” sign and select Connect Device on the popup that
appears. If the popup does not appear, does the app try again still nothing?
Read the ‘ troubleshooting’ section on this user guide.
**Select the right network
** Enter you’re home Wifi name and password. then press” Continue”
Make sure you’re connected to a 2.4Gliz W iFi netwer;(Mon Smart can’t connect
to 501z networks).
Troubleshooting
Smart WiFi Color string light
The popup does not appear when adding a device.
Make sure that you are allowing the app to access your phone’s Location (Android), Local Network (i0S). For more details, visit our website’s Support page If the popup still doesn’t appear, follow the steps below:
- Press “Add Device” or the “+” sign and select your smart device
- Follow the on- screen instructions (Make sure you connect to a 2.4GHz WiFi Network).
I can’t find the atomi-smart-XXX X network in my WiFi list.
Make sure your Atomi Smart device is plugged in and the lights are flashing red. If not, unplug your Atomi Smart device and plug it back in to reboot.
My WiFi network doesn’t appear in the Atomi Smart app.
Use your srnartphone to confirm that you have at least two WiFi bars in the vicinity of your Atomi Smart device. If not move your Atomi Smart device closer to your router. (The list will refresh every10 seconds).
Cannot connect to my WiFi network.
Make sure that you have entered the correct WiFi password during the WiFi setup. Checkl f there are problems with your Internet connection. If the W Fi signal is too weak. reset your WiFi router and try again
I’m getting “Failed to Add Device”, “Failed to find router” or “DHCP” error. –
- Confirm that your phone is connected to a 2.4GHz WiFi network.
- Check whether the router password you entered is correct.
- Confirm that the DHCP service is enabled on your router settings.
- Make sure that your WiFi signal is strong.
- Temporarily disable your 5GHz network
- If you have a mesh network/router that does not allow you to disable 5GHz. try to move farther away f rom your router until your phone moves to the 2.4GHz band. – For more Connection Troubleshooting tips, visit atomismart.com/connection- troubleshooting/
My Atomi Smart device appears as “Unavailable” or “Offline” in the app.
Refresh the device list
I just replaced my router.
If you replace your router, you will need to reset your devices and add them
again to the app.
How to reset my device.
Press and hold the Power button for 10s. Confirm that the lights start
flashing.
For more information about app and device features, tutorials and troubleshooting tips go to: www.atomismart.cominelpStringLigits
Safety Instruction
IMPORTANT
Read all safety information and installation instructions before install ng or servicing this product. Save this manual for reference
RISK OF ELECTRIC SHOCK
- Reoeptade outlets used for powering Smolt String Lights shall oornci ywith all national and local electrical codes Coml..’ Octal electrician if unsure of compliance requirements.
- For use only on GFd protected cirthts. – Do not submerse.
- Do not use in water,
- Do not use with extension corn near water or where water may eccuma ate
- Keep lamps at least 76 feet from wetec
- Keep plugs and receptacles dry.
- Avoid damage to the cords and lamp assemblies during installation. Period) ccilly inspect be Smart Std ng Lights for physical damage or other damage caused by outdoor exposure to the elements
- Reg face any dernageo Smart String Light strirgs.
- Do not installation in locutions where Smart String Lights can be stepped on
- Ensure Smart String Lights ore unplugged from power during installation
- Smart String Lights should be installed out of the reach of children Do not allow children to ploy with them.
- UI recommends testing GEC’ circuits and receptod es evey month to ensure Groper operation.
- Do not operate without eulesecurely screwed in
RISK OF FIRE
- Smart String Lights are de Signed to be mounted at th their individual keyhde mounting feature.
- Do not mount Smart String Lights by Liens the main electncel cord or the individd drop cords.
- Smart String Lights are designed to hove Lid imited I nkebility by using their electrical plugs and receptacles.
- Do not mount Smart String Lights in any position where the bulls is facing up.
- Do not allow the LED lamp assemblies to be in contact with ccmlustiti e materias. LED lamp assemblies should hang freely and not be susceptible to repetitive damage caused by envirrxmental tonsillitis such os wind. rain, and ice.
- Not intended for Installation in ceil rigs. soffits. cabinets, attics, or cther enclosed spaces.
Still can’t connect? Need assistance?
Our friendly customer service team will work hard to put a smile back on your
face. Here’s how we can connect.
1- S100-757-1440 Mon-
Fri 9:00-5:00 EST (US)
[email protected]
Welcome to the Atomi Smart family!
We know you will love our products so much that we are giving you an exclusive 15% off your next purchase on atomismart.com.
Log onto https://atomismartcom/shop-now/
add Add to Cart
Enter promo code ATOMI15OFF
Proceed to checkout
Free shipping on orders over $50 —411-0″ within the contiguous US only
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC
Radiation Exposure Statement The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located for operating in conjunction with any other antenna or transmitter.
The following terms and conditions apply to the pronto code; ;
- Coupon is only valid on the Atomi Smart website wwwatomismartoom
- A valid code must be entered at the checkout page in order to redeem the promotion.
- Customers oan only redeem one time at checkaut
- Customers can only use the promo code once
- Atomi Smart reserves the right to canoel or modify any oraer. or revoke the use sr the promo cede for any reason.
- Urr ess otherwise stated, promo codes are not valid in conjunction with otner Promotions or discounts.
- Aaditional terms and conditions may be specfied in relation tc specific promo code (for example. duration, eligibility, discount amount and products covered). and will govern the use and redemption o’ those vouchers.
- Promo code is not exchangeable for cash,
- Atomi Smart wrl I not be liable and/or Se required to offer replacement codes, discounts, credits. cash or otherwise compensate customers for:
- discontinued or cancelled promo code;
- improper use of. orignaill ty to redeem, a promo code: or
- the inability to redeem promo cede due to technical issues.
FCC Notice: This device complies with Part 15 of the FCC Rules. Operation is subject to the two following conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class II digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference in a residential installation,
Warning Thls product con expose vou to chemicals Incluang Lead. wh)ch Is known to the State of Colitornlo to cause birth defects or other reproauctl ve herrn. For mere Informot i•n.go to www.P65WarnIngsco.got
atomi srnarte
For questions or concerns, email us at [email protected] Manufactured and
marketed by Atomi Ina 10 West 33rd St., New York, NY 10001 atomi TM is a
trademark of Atomi Inc. atomi smart• is a registered trademarkof Atomi Inc.
Designed by Atomi in New York. Made in China.
Three-year limited warranty from the ciate Of purchase against defects in material and workmanship.
