ARISTA AWE-5510 Wifi Router User Guide

AWE-5510 Wifi Router
User Guide

Quick Start Guide
Router
AWE-5310
AWE-5510

Overview

This Quick Start Guide (QSG) describes the specifications and installation details of the Arista Router.
This chapter includes the following topics:

• Scope
• Intended Audience
• Receiving and Inspecting the Equipment
• Installation Process
• Safety Information
• Obtaining Technical Assistance
• Product and Documentation Updates

1.1 Scope
This guide is intended for properly trained service personnel and technicians in necessary to install the following Arista Router.
This includes the following products:
• AWE-5310
• AWE-5510
1.2 Intended Audience
This guide can be referred to any qualified person who would like to install the device.
Note: Only qualified personnel should install, service, or replace this equipment. Sale personnel qualification installer, service, out replacer cat equipment.
1.3 Receiving and Inspecting the Equipment
Upon receiving the router, inspect the shipping boxes and record any external damage. Retain packing materials if you suspect that part of the shipment is damaged; the  carrier may need to inspect them.
If the boxes were not damaged in transit, unpack them carefully. Ensure that you do not discard any accessories that may be packaged in the same box as the main unit.
Inspect the packing list and confirm that you received all listed items. Compare the packing list with your purchase order. Parts List provides a list of components included with the router.
1.4 Installation Process
The following steps are to be followed to install and usage of the router:

1. Select and prepare the installation site.
2. Assemble the installation tools listed.
3. Attach the mounting brackets and install the router in an equipment rack.
4. Connect the router to the power source and network devices.
5. Configure the router.

1.5 Safety Information
Refer to the Arista Networks document Safety Information and Translated Safety Warnings available at https://www.arista.com/en/support/product- documentation

1.6 Obtaining Technical Assistance
Any customer, partner, reseller or distributor holding a valid Arista Service Contract can obtain technical support in any of the following ways:

• Email: support@arista.com. This is the easiest way to create a new service request. Include a detailed description of the problem and the output of “show tech-support”.

• Web: https://www.arista.com/en/support
  A support case may be created through the support portal on our website. You may also download the most current software and documentation, as well as view FAQs,  Knowledge Base articles, Security Advisories, and Field Notices.

• Phone: +1 866-476-0000 or +1 408-547-5502.

1.7 Product and Documentation Updates
To receive important news on product updates, please visit our website at https://www.arista.com/en/support/product-documentation. We continuously enhance our product documentation based on customer feedback.

Specifications

This section lists the specifications of Arista Routers described in this guide.
Table 1: Dimensions and Weights

20.5 (lbs)
AWE-5510| 440 x 88 x 520 (mm)
17.32 x 3.46 x 20.47 (inches)| 13.6 (kg)
29.98 (lbs)

Table 2: Operating and Storage Temperature

Table 3: Power Ratings

Table 4: System Configurations

Router| Downlink Ports| Uplink Ports| Airflow| Power Supply| Fan
---|---|---|---|---|---
AWE-5310| 4x10G/1G RJ45| 4x10G/1G SFP+| Front to rear| 2| 4+1
AWE-5510| N/A| 16x10G/1G SFP+| Front to rear| 2| 3+1

Preparation

This chapter describes the initial setup and preparation for installing the router.
This chapter includes the following topics:

• Site Selection
• Tools and Parts Required for Installation
• Electrostatic Discharge (ESD) Precautions

3.1 Site Selection
The following criteria should be considered when selecting a site to install the router:

• Temperature and Ventilation: For proper ventilation, install the router where there is ample airflow to the front and back of the router. The ambient temperature should not  go below 0° or exceed 40°C.
  Note: To prevent the router from overheating, do not operate it in an area where the
  ambient temperature exceeds 40°C (104°F).

• Rack Space: Install the router in a rack or cabinet. The router height is 1.74″. The accessory kit provides necessary equipment such as mounting brackets and screws  required for the installation.
  When mounting the router in a partially filled rack, load the rack from bottom to top, with the heaviest equipment at the bottom. Load the router at the bottom if it is the only item in the rack.
  • Power Requirements: Power requirements vary by router and power supply model. Refer to Table 3: Power Ratings and for information regarding your specific  system.
  Note: The power input plug-socket combination must be accessible at all times; it provides the primary method of disconnecting power from the system.
  Other Requirements: Select a site where liquids or objects cannot fall onto the equipment and foreign objects are not drawn into the ventilation holes. Verify the  following guidelines are met:

• Clearance areas to the front and rear panels allow for unrestricted cabling.

• All front and rear panel indicators can be easily read.

• Power cords can reach from the power outlet to the connector on the rear panel.

Note: All power connections must be removed to de-energize the unit.3.2
Tools and Parts Required for Installation
Each router provides an accessory kit that contains parts that are required to install the router. In addition to the accessory kit, the following tools and equipment are required  to install the router:
Additional Tools

• Screwdriver
• Screws or rack mounting nuts and bolts

3.3 Electrostatic Discharge (ESD) Precautions
Observe these guidelines to avoid ESD damage when installing or servicing the router.

• Assemble or disassemble equipment only in a static-free work area.
• Use a conductive work surface (such as an anti-static mat) to dissipate static charge.
• Wear a conductive wrist strap to dissipate static charge accumulation.
• Minimize handling of assemblies and components.
• Keep replacement parts in their original static-free packaging.
• Remove all plastic, foam, vinyl, paper, and other static-generating materials from the work area.
• Use tools that do not create ESD.

Mounting the Router

This chapter provides the instructions to mount the router.
This chapter includes the following topics:

• Four-Post Rack Mount
• Two-Post Rack Mount (Optional)

4.1 Four-Post Rack Mount
This section describes instructions for four-post rack mounting the router.
To mount the router in a rack, you need to assemble the mounting brackets to the chassis, then attach the brackets to the rack posts. It includes:

• Attaching Mounting Brackets to the Chassis – 4 post
• Removing the Mounting Bracket from the Chassis

4.1.1 Attaching Mounting Brackets to the Chassis – 4 post
This section describes the steps to attach mounting brackets to the router chassis.
Figure 1: Attaching the Mounting Brackets

Note: Ensure that there is about 1U rack spacing between the two devices on the rack.

1. Align the mounting brackets with the attachment pins.
2. Place the bracket flush to the chassis with the attachment pins protruding through the key-openings.
3. Slide the bracket toward the front flange until the bracket clip locks (with an audible click).

4.1.2 Removing the Mounting Bracket from the Chassis
This section describes the steps to remove the mounting brackets from the router chassis.

1. Lift the front edge of the mounting bracket clip with a flathead screwdriver.
2. Slide the bracket away from the front flange (opposite from the installation direction).

4.2 Two-Post Rack Mount (Optional)
This section describes instructions for two-post rack mounting the router.
To mount the router in a rack, you need to assemble the mounting brackets to the chassis, then attach the brackets to the rack posts. It includes:

• Attaching Mounting Brackets to the Chassis
• Inserting the Router into the Rack

4.2.1 Attaching Mounting Brackets to the Chassis
This section describes the steps to attach mounting brackets to the router chassis.
Figure 2: Attaching the Mounting Brackets

Note: Ensure that there is about 1U rack spacing between the two devices on the rack.

1. Position the bracket by aligning with the chassis holes on both the sides of the router and fix it with flat head screws.
2. Secure the mounting brackets firmly to the router.

4.2.2 Inserting the Router into the Rack
This section describes the steps to insert the router into the rack.
Figure 3: Inserting the Router into the Rack![ARISTA AWE 5510 Wifi Router

• fig2](https://manuals.plus/wp-content/uploads/2023/03/ARISTA-AWE-5510-Wifi- Router-fig2.png)

Note: For thermal purposes, make sure that there is 1RU clearance above the rack mount bracket.

1. Lift the chassis, attached with brackets, into the rack.
2. Place the router into the rack by aligning with the holes of the mounting bracket.
3. Position the flanges against the rack posts.
4. Attach the bracket flanges to the rack posts.

LED Status Indicators

This section describes the front panel LED status of the device.
Table 5: LED Status Indicators

operations.
Blue| The locator function is active.
Amber| System is malfunctioning. System is overheating or temperature sensors have recorded passing the SW defined critical threshold.
The device will automatically execute a “graceful shutdown” shortly.
Cloud Connect Status LED| Off| Not connected to the cloud.
Green| System is connected to the cloud.
Amber| Problem connecting to the cloud.
Fan Status LED| Green| All fan modules are operating normally.
Amber| Single fan module is malfunctioning.
Power Supply Status LED| Off| Power supply unit is not available.
Green| Power supply unit is fully functional.
Amber| Power supply unit has a fault.

Parts List

Each router provides an accessory kit that contains parts that are required to install the router. This section lists the installation parts contained in the router accessory kit.
Default Accessories
The following accessories are available along with the router box:

• Four-post rack mount kit
• Console Cables
• RJ45 ethernet cable
• Console cable
• Power cable (specified during time of purchase as it’s country specific or no power cord)

Optional Accessories
The following are the optional accessories:

• Two-post rack mount kit

SKU and Product Details
The following are the list of SKU numbers related to the respective product.

Table 6: SKU and Product Details

48W AC
Arista 5310, 4x RJ45 (w/2x Fail to Wire) 4x10G SFP+, 2 NIM slots, front to rear air, 2 550W AC
AWE-5510| Arista 5510, 8x SFP+ 10G, 8x SFP+ 10G Enhanced, 4 NIM slots, front to rear air, 2 800W AC

Front Panel

This section describes the front panel of each router.
7.1 AWE-5310
The AWE-5310 front panel includes the following key components:
Figure 4: AWE-5310 Front Panel

7.2 AWE-5510
The AWE-5510 front panel includes the following key components:
Figure 5: AWE-5510 Front Panel

Rear Panel
The section describes the rear panel of each router.
8.1 AWE-5310
The AWE-5310 rear panel includes the following key components:
Figure 6: AWE-5310 Rear Panel

8.2 AWE-5510
The AWE-5510 rear panel includes the following key components:
Figure 7: AWE-5510 Rear Panel

Regulatory Model Numbers

This section lists the Regulatory Model Numbers (RMNs) of the routers described in this document.
Table 7: RMNs

EMC Class A Notices and Warnings

Refer to the following sections for detailed EMC Class A Notices and Warnings.
Traditional Chinese Class A EMC Statement (Taiwan)

Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide  reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio  frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this  equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Canada Statement
This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this  device must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure Statement:This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed  and operated with greater than 20cm between the radiator & your body.
Class A (Korean) Statement
This equipment has KC approval to be used in business environments, and if used in a home environment, there is a risk of radio wave interference.

Traditional Chinese Statement
For low-power radio frequency equipment that has obtained certification, companies, firms, or users are not allowed to change the frequency, increase the power, or change  the characteristics and functions of the original design without approval. The use of low-power radio-frequency equipment must not affect flight safety and interfere with  legal communications; if any interference is found, it should be stopped immediately, and it can only be used after improvement until there is no interference. The  aforementioned legal communication refers to radio communication operated in accordance with the provisions of the Telecommunications Management Act. Low-power  radio frequency equipment must endure the interference of legal communication or industrial, scientific and medical radio wave radiation electrical equipment.
Brazil Statement
This equipment is not entitled to protection against harmful interference and must not cause interference to properly authorized systems.
For more information, see the ANATEL website – http://www.anatel.gov.br
This product is not suitable for use in home environments, as it may cause electromagnetic interference that forces the user to take necessary measures to minimize this interference

Mexico Statement
Operation of this equipment is subject to the following two conditions: (1) this equipment or device may not cause harmful interference, and (2) this equipment or device  must accept any interference, including interference that may cause undesired operation.

Class A Notice for EU

Warning: Operation of this equipment in a residential environment could cause radio interference.
This device complies with Directive 2014/53/EU and UK Radio Equipment Regulations 2017 SI 2017/1206. issued by the Commission of the European Community.
– Declaration of Conformity
Please added certification standard in your user manual which depended on the test standards your device performed. or
– If the DoC should be a simplified version, please take below as reference –
Hereby, [Name of manufacturer] declares that the radio equipment type [designation of type of radio equipment] is in compliance with Directive 2014/53/EU and UK Radio  Equipment Regulations 2017 SI 2017/1206.
The full text of the EU declaration of conformity is available at the following internet address:
The frequency and maximum transmitted power in EU are listed as bellows:

2400 – 2500 MHz
VCCI Class A Warning for Japan
Arista Networks
www.arista.com
DOC-xxxxxx-xx

References

• Anatel — Agência Nacional de Telecomunicações
• Data-Driven Cloud Networking - Arista
• Data-Driven Cloud Networking - Arista

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>