ANSTEN AS30NEW Wireless Gaming Headset User Manual

ANSTEN AS30NEW Wireless Gaming Headset User Manual

PRODUCT OVERVIEW

1. Pogopin for charging
2. Adaptive design headband
3. Detachable microphone
4. Micro-USB charging&console cable
5. 3.5mm audio cable
6. Wireless Transmitter&charging base
7. Soft Ear cushion
8. Power LED Indicator(Base station)
9. Charing LED Indicator(Base station)
10. Microphone Mute/Pairing*’
11. Volume control
12. Microphone Jack
13. 3.5mm Jack for wired use
14. Micro USB for Charing
15. Power buttom&Backlight on/off&Breathing mode*-
16. LED Indicator(Headphone)
17. Power switch(Base station)
18. Micro USB For Charing&data
19. Optical input
20. A/D input switch*
21. 3.5mm input(Aux)

SETUP

1. Use the Micro-USB cable to connect Adapter and Wireless Transmitter to power up
2. Use the Micro USB cable connect your PC/PS4/ Nintendo Switch(need micro USB to Type-C adapter) to Wireless Transmitter
3. You can also use 3.5mm to 3.5mm cable connect PC/Game controller to Headphone directly

CAHRGING

1. You can hang the headset to the base for charging, make sure that the headset and the base are in correct contact, and the charging indicator light is on.
2. You can also charge the headset to use the micro-USB cable to the charging port on the headset,and plug the other end into any USB power source(5V/1A)
3. LED indicator will Red when charing,will off when charging full.
4. LED indicator on the headset will flash when low power(battery level<10%)

POWER ON/OFF

 To power on the headset press and hold the power button for at least 3 seconds. The LED indicator will Red.

 To power off the headset press and hold the power button for at least 3 seconds. The LED indicator will off.

PAIRING

Press and hold the headset pairing button for 3 seconds, you will see the LED indicator blinking and Red.
Press and hold the transmitter pairing buttonfor 3 seconds until the Led begins blinking rapidly

OTHER CONNECT FOR WIRELESS AUDIO

You can also use the 3.5mm to 3.5mm cable to connect your mobile to Wireless transmitter for enjoy wireless audio

USE THE OPTICAL CABLE TO CONNT XBOX TO THE BASE

MECROPHONE

Position the microphone close to the corner of your mouth with the flat surface facing you

SYSTEM SETTING WINDOWS

01. Go to sound setting 02. Under “playback” highlight AS30 game audio and select “set default” 03. Under “recording” highlight AS30 microphone and select “set default” 04. In your VoIP(chat) application select AS30 chat audio as the default audio device

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>