tp-link RE200 Mesh Wi-Fi Range Extender Installation Guide

: June 9, 2024
: tp-link

Table of Contents

Power On
Set Up
Relocate
Manage the Extender
LED Explanation
FAQ (FREQUENTLY ASKED QUESTION
Safety Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

tp-link RE200 Mesh Wi-Fi Range Extender Installation Guide

Power On

Plug the extender into a power outlet next to your router. Wait untilits Power LED turns solid on.
Note: For safety, only plug the extender in the direction as shown below
Power On

Set Up

Via the Tether App

Get the up-to-date Tether app from the Apple App Store or Google Play, or simply scan the QR code.

Scan for Tether

Tether
Launch the Tether app and log in with your TP-Link ID. If you don’t have an account, create one first.
Tap the button and select Range Extender.
Note: If you cannot find your device, please refer to FAQ > Q1.
Follow app instructions to complete the setup. The LED should turn solid on, indicating successful connection to your router.
Note: If the LED does not turn solid on, please refer to FAQ > Q2.

More Setup Methods

Via a Web Browser

Connect your computer or smartphone to the extender’s network TP-Link_Extender.
Visit http://tplinkrepeater.net or http://192.168.0.254 in a web browser. Create a password to log in.
Follow web instructions to complete the setup.

Via the WPS Button

Press the WPS button on your router.
Within 2 minutes, press the WPS button on the extender for 1 second. The LED should change from blinking to solid on, indicating successful connection.
If the extender connects to a dual band router, repeat steps 1 and 2 to connect to the other band.

Extended Network Names: Router’s network name with _EXT at the end or Same as your One Mesh router (See back for One Mesh details)
Passwords: Same as your router

For more details, please refer to the user guide at
https://www.tp-link.com/support/download/.

Relocate

Plug in the extender about halfway between your router and the Wi-Fi dead zone. The location you choose must be within the range of your router.
Wait for about 2 minutes until the LED turns solid green. If it doesn’t, relocate the extender closer to the router to achieve better signal quality

Tip: To place the extender for optimal Wi-Fi performance, access extender settings via the Tether app and go to Tools > Location Assistant, or simply scan the QR ode to visit https://www.tp-link.com/support/faq/3103/.

Enjoy!

Connect your devices to the extender wirelessly or via an Ethernet cable, then enjoy the internet. The password of your extended network is the same as your host router.
Tip: You can also set up the extender in Access Point mode to transform your existing wired network to a wireless one. For details, refer to the user guide at https://www.tplink.com/support.
Relocate

Manage the Extender

After setup, you can manage the extender via any of the methods below.
Note: If your extender and router use the same network name, Method 1 is recommended.

Method 1: Via the Tether App

Connect your smartphone to the extender‘s or router’s network.
Launch the Tether app, select your extender, and log in.
Manage the extender as needed.

Method 2: Via a Web Browser

Connect your computer or smartphone to the extender’s network. If you are using a computer, unplug the Ethernet cable if any.
Launch a web browser, enter http://tplinkrepeater.net in the address bar, and log in.
Manage the extender as needed

One Mesh TM with Seamless Roaming

TP-Link One Mesh TM router and extenders work together to form one unified Wi- Fi network. Walk through your home and stay connected with the fastest possible speeds thanks to One Mesh’s seamless coverage.

Unified Wi-Fi Network
Router and extenders share the same wireless settings, including network name, password, access control settings and more.

Seamless Roaming
Devices automatically switch between your router and extenders as you move through your home for the fastest possible speeds.

Easy Setup and Management
Set up a One Mesh network with a push of WPS buttons. Manage all network devices on the Tether app or at your router’s web management page.

To check full list of TP-Link OneMesh devices, scan the QR code, or visit https://www.tp-link.com/One-Mesh/compatibility.

LED Explanation

LED	Status	Indication (For Range Extender Mode)
5GHz	On/Of	The extender is connected or not connected to the 5GHz wireless

network of your host router.
2.4GHz| On/Of| The extender is connected or not connected to the 2.4GHz wireless network of your host router.
(Signal)| Solid green Solid red Of| The extender is connected to your router’s wireless network and is in a suitable location. The extender is experiencing poor signal strength. Try relocating it closer to your router. No wireless connection is established.
(Ethernet)| On/Of| The Ethernet port is connected or not connected to a powered-on device.
(Power)| On/Off Blinking| The extender is on or off. The system is starting up or firmware is being upgraded.
(WPS)| On Blinking Of| WPS connection is established. WPS connection is in progress. WPS connection has been established for more than 5 minutes or WPS connection failed

FAQ (FREQUENTLY ASKED QUESTION

Q1. What should I do if the Tether app cannot find my device during setup?

Try another method by following the steps below:
1. Connect your smartphone to the extender’s network TP-Link _Extender.
2. Launch the Tether app, and select your extender.
  Tip: If you have connected to the extender’s Wi-Fi but still cannot find your device, try turning off your cellular data.
3. Follow app instructions to complete the setup. If you are still having problems, contact our technical support

Q2. What should I do if the LED doesn’t turn solid on after completing setup via the Tether app or web browser?

You may have entered incorrect Wi-Fi password for your host router during the configuration. Check the password and try again.
Make sure the extender is close to your router, preferably within 16 feet, and away from large electrical appliances.
If you have enabled wireless MAC filtering, wireless access control, or access
control list (ACL) on your router, disable them first, then follow any method on the front page to complete the configuration.
Try setting it up via the WPS button.
Reset the extender and go through the configuration again.
If you are still having problems, contact our technical support.

Q3. How do I reset the extender?

With the extender powered on, use a pin to press the RESET button for 1 second. The extender will reboot

f you need more setup help, please visit https://www.tp- link.com/support/faq/3074/, or simply scan the QR code.

Safety Information

Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use the device where wireless devices are not allowed.
The socket-outlet shall be installed near the equipment and shall be easily accessible

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at
https://www.tp-link.com/support/ukca

To communicate with TP-Link users or engineers, please join the TP-Link Community at https://community.tp-link.com.

If you have any suggestions or needs for our product guides, you are welcome
to email [email protected].

For technical support, replacement services, user manuals and other information,
please visit https://www.tp-link.com/support, or simply scan the QR code.