TAP ACCORDION Dynamic Active system Microphones Instruction Manual
- June 9, 2024
- TAP
Table of Contents
TAP ACCORDION Dynamic Active system Microphones Instruction Manual
Active, Professional Accordion System With Dynamic Microphones.
“TAP” Microphones system is the most advanced for Accordion with great
performance and exceptional response. It consists, of two discreet units, one
for the treble (melodies) section and the other for the bass section.
The internal preamplifier provides high output signal with low consumption.
That matches to all amplifiers and consoles. The unit powered with a 3 Volt
lithium battery (2032). Comes with 1/4 output jack that suitable to connect in
amplifier and in microphone inputs of console. Include, Volume and Tone
controls, along with an input (3.5) for the optional bass section “AKO-B”.
The clear sound covers all frequencies with a unique and warm reproduction.
Dimensions : 330mm x 60mm x 26mm
INSTALLATION
The section for the treble, installs easily over the accordion’s front surface
panel. The system secures on the accordion with 2 elastic round-strap brackets
, that mounts on the sides. The rubber plate legs, avoids scratching on the
accordion surface.
The AKO-B mounts over the bass holes, with special “Velcro” tape, and connect
to appropriate input (3.5 mm).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>