johansson 9654 Wideband Power Amplifier User Manual
- June 4, 2024
- johansson
Table of Contents
User Manual
Wideband Power Amplifier
Ref. 9654
No part of this manual may be copied, reproduced, transmitted, transcribed or
translated into any language without permission. Unitron reserves the right to
change the specifications of the hardware and software described in these
manuals at any time.
Unitron cannot be held liable for any damages resulting from the use of this
product. Specifications are subject to change without notice. 02/20.
© Unitron Frankrijklaan 27 B-8970 Poperinge Belgium
T +32 57 33 33 63 F +32 57 33 45 24
FEATURES
This amplifier is designed for wideband applications where satellite
frequencies are used from 290 MHz to 2340 MHz. These applications use only 2
coaxial lines: one for the horizontal and one for the vertical feed. This
means the low band and the high band are combined in one signal.
This amplifier is compatible with wideband LNBs and has:
- 2 inputs and 2 outputs
- 30 dB gain
- 2 separate adjustments for gain: 15 dB
- 2 separate adjustments for slope: 15 dB
- 290 2340 MHz frequency range
- DC input for powering the trunk line amplifier & LNB.
SAFETY INSTRUCTIONS
Read these instructions carefully before connecting the unit
The operating voltage is indicated on the adapter.
To prevent fire, short circuit or shock hazard:
- Do not expose the unit to rain or moisture,
- Install the unit in a dry location without infiltration or condensation of water,
- Do not expose it to dripping or splashing,
- Do not place objects filled with liquids, such as vases, on the apparatus,
- If any liquid should accidentally fall into the cabinet, disconnect the power plug.
To avoid any risk of overheating:
-
Install the unit in a well aired location and keep a minimum distance of 15 cm around the apparatus for sufficient ventilation,
-
Do not place any items such as newspapers, table-cloths, curtains on the unit that might
cover the ventilation holes, -
The unit must not be exposed to any source of heat (sun, heather,…),
-
Do not place any naked flame sources, such as lighted candles, on the apparatus,
-
Do not install the product in a dusty place,
-
Use the apparatus only in moderate climates (not in tropical climates),
-
Respect the minimum and maximum temperature specifications.
To avoid any risk of electrical shocks:
- Connect apparatus only to socket with protective earth connection,
- The mains plug shall remain readily operable,
- Pull out power plug to make the different connections of cables,
- To avoid electrical shock, do not open the housing of adapter.
Maintenance
Only use a dry soft cloth to clean the cabinet,
Do not use solvent,
For repairing and servicing refer to qualified personnel.
Dispose according your local authority’s recycling processes
HOW TO MAKE YOUR CONNECTIONS
| ‘(1) = grounding connection
‘(2) = to LNB output 1 (Horizontal)
‘(3) = to LNB output 2 (Vertical)
‘(4) = power supply connection
‘(5) = trunk output 1 (Horizontal)
‘(6) = trunk output 2 (Vertical)
---|---
APPLICATION
TECHNICAL SPECIFICATIONS
9654 – Wide Band Power Amplifier
Inputs| –| 2 SAT
Outputs| –| 2 SAT
Frequency range| MHz| 290-2340
Gain| dB| 30
Noise figure| dB| 5
Gain adjustment| dB| 15
Slope adjustment| dB| 15
Max. Output level| –| 110 dBµV (-35 dB/IM3)
Consumption| W| 3
Dimensions| mm| 177 x 133 x 51
CONDITIONS OF WARRANTY
Unitron N.V. warrants the product as being free from defects in material and workmanship for a period of 24 months starting from the date of production indicated on it. See note below. If during this period of warranty the product proves defective, under normal use, due to defective materials or workmanship, Unitron N.V, at its sole option, will repair or replace the product. Return the product to your local dealer for reparation
THE WARRANTY IS APPLIED ONLY FOR DEFECTS IN MATERIAL AND WORKMANSHIP AND DOES NOT COVER DAMAGE RESULTING FROM:
- Misuse or use of the product out of its specifications.
- Installation or use in a manner inconsistent with the technical or safety standards in force in the country where the product is used
- Use of non-suitable accessories (power supply, adapters…).
- Installation in a defect system.
- External cause beyond the control of Unitron N.V. such as drop, accidents, lightning, water, fire, improper ventilation…
THE WARRANTY IS NOT APPLIED IF
- Production date or serial number on the product is illegible, altered, deleted or removed.
- The product has been opened or repaired by a non-authorized person.
NOTE
Date of production is YYWW format, example 1621 = year 2016 week 21. For the
serial number barcodes, the date corresponds to the 4 first numbers.
UNITRON NV Frankrijklaan 27 B-8970 Poperinge Belgium