tuya 4G Intelligent Solar Energy Alert PTZ Camera User Manual
- June 4, 2024
- Tuya
Table of Contents
tuya 4G Intelligent Solar Energy Alert PTZ Camera
PRODUCTS & PACKING LIST
Product picture
Screw kit
- 1*Hexagon spanner
- 1*Screw driver
- 8*Screws
- 8 Tapping screwv
- 1* USB charging cable
PRODUCT DIAGRAM
Quick Setup
- Insert the USB cable of solar panel to the “USB” Silicon Flap on the bracket base for batterty charging.
- Press the Power switch to turn ON/OFF the camera
- Wait the voice prompt step by step for pairing the camera with the APP.
Note:
- Before you turn on the camera, please close the silicon flap to avoid rain leakage.
- Make sure your phone is connecting to the 2.4Ghz wifi firstly before you pairing the camera.
INSTALLATION
- Integrated installation
- Separated installation
APP INSTALLATION
- Search and download” tuya” in major application markets or scan the QR code below to download the APP.
- Once you download the APP to your smartphone, you may enter the first page where you can log in with your existing account or register.
- (If you are a new user of Smart Life and don”t have an account, please choose register first and follow the below screenshots to complete the registration.)
(it you have an existing account, there are two ways to log in, one is with an SMS verification Code, and the other one is with a password. In case you forget the password, you may choose login SMS verification Code or you can choose forgot password to reset it by Entering Verification Code which is sent to your mobile via message. - Once the account has been set up successfully, then you will automatically enter the page of “add device”, kindly follow the below steps to add the camera.
- Step1:click “Add Device” or click”+” on top of right on this page.
- Step2: Scan the QR code on the camera with your mobile phone, and after successfully pairing, it will prompt “Added successfully”
- Step3. If you choose ” the other mode ” on the top of the right side, you may find QR Code Net-pairing Which you will go back to the “Add device”page and process it again like above procedure. Or you can choose “Smart configuration”and follow the below screenshots and after that you will see the device added successfully.
FAQ:
After the configuration is done, our device will be shown on Smart Life APP which enable you to surf the smart living easily. If you have any questions about App using, you may go to the category”me”‘to find the” Help Center” and check if you have the same issues. If not, you can report the issue and then your problems will be handled and answers will be given soon if you provide as much information as you can.
Safe Battery Handling and Usage
DO NOT allow the batteries or battery compartment to get wet prior to or
during installation while your Wire-Free camera is weatherproof and safe to
use outside.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>