Lorelli Avatar Kick Scooter Instruction Manual

: June 4, 2024
: lorelli

Table of Contents

Lorelli Avatar Kick Scooter
Instructions
- WARNING!
SERVICING AND MAINTENECE
PARTS AND TOOLS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Lorelli Avatar Kick Scooter

Instructions

Scan the QR code to get more product information and manual instruction in more languages. Download QR Scanner App onto your device.

WARNING!

WARNING! Read and follow all the warnings and instructions written in this manual before using the scooter!
WARNING! You shall read, follow or understand all the basic operational instructions and warnings stated in this manual, otherwise there is a serious risk of injures as a result of collisions, falls or loss of control.
WARNING! It is your duty to check as well as to obey all the laws and regulations in your region!WARNING! The common sense and the good judgement are very important to avoid any accident or injury!
WARNING! The product should be properly assembled by an adult!
WARNING! Never leave the child unattended!
WARNING! To be used only under the direct adult supervision!
WARNING! Keep your fingers and toes away from all moving parts of the scooter!WARNING! Do not modify the product!
WARNING! Wear personal protective equipment (helmets, gloves, knee-pads, elbow-pads)!Not to be used in traffic!
WARNING! Maximum weight: 100 kg! Age: 8+ years!
WARNING! The scooter shall be used with caution, since skill is required to avoid falls or collisions causing injury to the user or third parties.
WARNING! Before each use please inspect the suspension, the fastening and the fixing of the components and of the locking devices, because in the course of time they may lose their effectiveness.
WARNING! Do not ride in darkness
WARNING! This product is not a toy. Images on the title page and in the instruction manual are only illustrative and may differ from the real Product.

IMPORTANT NOTE AND ADVICES

The user of the product shall check the limitation of use according to regulations of road safety.
Use the product on suitable surfaces: flat, clean, dry and where possible away from other road users.
Be very careful when riding on wet surfaces due to reduced wheels traction and braking action!
Keep away from roads or where there is incoming traffic.
Do not ride on slippery surface.
Avoid riding on stairs as the scooter might overturn causing serious injuries.
Use at least the following protective equipment: hand/wrist, knee, head and elbow protection.
Please check that the steering system is correctly adjusted and that all connection components are firmly secured and not broken.
Make sure that you are ready for use in order to avoid pitching or entrapment.
Always wear shoes.
Mechanism to reduce speed will get hot from continuous use, do not touch after braking!
The product shall be use from only 1 person!
The product is not intended for extreme sports!
Please keep your feet on the scooter plate and never ride whit one single hand!

SERVICING AND MAINTENECE

PLEASE NOTE, THE REGULAR MAINTENANCE ENHANCES THE SAFETY OF THE KICK SCOOTER.

Please check and tighten periodically the self-locking nuts and other self-locking fixings as they may lose their effectiveness.
Replace the bearings if they are outworn! WARNING! – Bearings and wheels are consumable and will not be warranted!
No modifications other than to the manufacturer’s instructions shall be made.
It is advised to inspect and maintain the scooter before use.
Do not keep the scooter under direct sunlight or in wet places for a long time. The scooter may be damaged.
Clean the scooter periodically and keep it dry.
It is advised to use periodically oil for lubrication.
You may use damp cloth and a mild detergent for cleaning the product.

SAFETY RIDING

This scooter under no circumstances should be ridden on a public highway or busy roads.
Do not ride the product under the influence of alcohol, drugs or medicines.
Avoid uneven pavements or pot-holes, as this may cause you to lose control of the scooter.
Do not ride the scooter in bad weather conditions, like strong wind, heavy rain or snow.
Please do not use the scooter or slow down the speed if the road conditions are poor.
The product is intended for users 8+ years old.
Don’t carry anything in your hand while riding the scooter. Always ride it with both hands.
Avoid the using of earphones/ headphones as they may restrict your hearing.
Do not wear loose/ hanging clothing or scarves, as they may get caught in the wheels.
When you are riding near parked vehicles, look out for car doors which can be opened.
Ensure that there are no broken components and that the locking devices are engaged.

BRAKING

Picture 3 .The rear wheel cover functions as a brake , apply the brake by stepping on the brake pedal (rear wheel cover).Before the first riding of your scooter it is recommended to train the applying of the brake
at various speeds and in an open area, free from people and objects. Gradually press the brake mechanism with your foot.
IMPORTANT! Faster speeds require longer braking distances. Sudden braking on low-traction surfaces ( wet ,sandy ) may cause wheel slips or falls

CHILD SAFETY

Never leave the child unattended.
Always check the product for any loose screws, nuts and bolts before letting your child ride it.
Instruct your child how to ride the scooter safety and make sure your child is capable of riding it.
Make sure your child wear protective equipment to avoid injuries incl. helmets, gloves, knee-pads, elbow-pads.
Never let your child ride the scooter on the road.
When riding the scooter make sure that your child yield the right of way to the pedestrians and doesn’t ride too close to them.

ASSEMBLY

Slide the handlebar stem over the threaded locking section. (picture. 2)
Ensure the arrow on the fork is forwards-facing and the handlebar positioned backwards.
Tighten the bolts(pic.2.1) evenly and tightly using the Allen key (pic.1.2).
Make sure the front wheel forwards-facing when the handlebars are held pointing side.
Warning! The product should be properly assembled by an adult.
NOTE: A Bolt that seems fully tightened may require further tightening after tightening the others bolts.