RYOBI RGL18 Dual Temperature Glue Gun Instruction Manual

: June 13, 2024
: RYOBI

Table of Contents

RYOBI RGL18 Dual Temperature Glue Gun
Product Information
Product Usage Instructions
GLUE GUN SAFETY WARNINGS
TRANSPORTING LITHIUM BATTERIES
MAINTENANCE
SYMBOLS ON THE PRODUCT
Installation
PRODUCT SPECIFICATIONS
BATTERY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RYOBI RGL18 Dual Temperature Glue Gun

Product Information

The RGL18 glue gun is a high-quality and reliable tool designed for applying hot glue adhesives. Safety, performance, and dependability have been prioritized in its design. Please read the instructions carefully before assembling, operating, and maintaining the product. The glue gun should only be used for its intended purpose and not for any other operations to avoid
hazardous situations.

Intended Use
The glue gun is specifically intended for applying hot glue adhesives. It is not suitable for use by individuals with reduced physical, sensory, or mental capabilities unless supervised or
instructed by a responsible person. Children should be supervised to prevent them from playing with the appliance. If the product is to be stored unused for a long period, it is recommended to remove the batteries. The supply terminals should not be short-circuited.

Glue Gun Safety Warnings

This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities.
If the product is to be stored unused for a long period, remove the batteries.
Do not short-circuit the supply terminals.

Additional Battery Safety Warnings
To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse the tool, battery pack, or charger in fluid. Corrosive or conductive fluids can cause a short circuit. When transporting lithium batteries, follow local and national provisions and regulations. Ensure batteries do not come in contact with other batteries or conductive materials during transport.

LED Indicator

Colour	Status
Red	Warming up
Green	Ready to use

Maintenance
Use only original accessories and spare parts. For component replacements, contact an authorized service center. Avoid using solvents when cleaning plastic parts, as they may cause damage. Do not let brake fluids, gasoline, petroleum-based products, or penetrating oils come in contact with plastic parts, as they can weaken or destroy them.

Symbols on the Product

Safety alert
V (Volts)
Direct current
Regulatory Compliance Mark (RCM)

Symbols in this Manual

Note
Off
Parts or accessories sold separately
Nozzle
Glue stick chamber
LED on/off indicator
Mode selector
Trigger
Handle
Drip tray

Product Usage Instructions

Read the instructions in the manual carefully before starting to use the glue gun.
Assemble the glue gun according to the provided instructions.
Ensure that the batteries are inserted correctly if applicable.
Plug in the glue gun and wait for the LED indicator to turn red, indicating that it is warming up.
Once the LED indicator turns green, the glue gun is ready to use.
Select the desired mode using the mode selector if available.
Load a glue stick into the glue stick chamber.
Hold the glue gun by the handle and aim the nozzle at the desired surface.
Press and hold the trigger to dispense the hot glue adhesive. Release the trigger to stop dispensing.
Be cautious of the hot surface and avoid direct contact to prevent injury.
After use, unplug the glue gun and allow it to cool down before storing it.

IMPORTANT!

It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modifications.
Safety, performance, and dependability have been given top priority in the design of your glue gun.

INTENDED USE

The glue gun is intended for applying hot glue adhesives.
Do not use the product for any other purpose.
Use of the product for operations different from intended could result in a hazardous situation.

GLUE GUN SAFETY WARNINGS

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
If the product is to be stored unused for a long period, the batteries should be removed.
The supply terminals are not to be short-circuited.

ADDITIONAL BATTERY SAFETY WARNINGS

To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them.
Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national provisions and regulations.
Follow all special requirements on packaging and labelling when transporting batteries by a third party.
Ensure that no batteries can come in contact with other batteries or conductive materials while in transport by protecting exposed connectors with insulating, non-conductive caps or tape.
Do not transport batteries that are cracked or leaking.
Check with the forwarding company for further advice.

LED INDICATOR

Colour Status
- Red: Warming up
- Green: Ready to use

MAINTENANCE

Use only original accessories and spare parts. Should components need to be replaced which have not been described, please contact an authorised service centre. All repairs should be performed by an authorised service centre.
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc.
Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.

SYMBOLS ON THE PRODUCT

Safety alert
Volts
Direct current
Regulatory Compliance Mark (RCM). Product meets applicable regulatory requirements.
Please read the instructions carefully before starting the machine.
To reduce the risk of injury or damage, avoid contact with any hot surface.
Hot surface
Do not dispose of waste batteries, waste electrical and electronic equipment as unsorted municipal waste.
Waste batteries and waste electrical and electronic equipment must be collected separately.
Waste batteries, waste accumulators, and light sources have to be removed from the equipment.
Check with your local authority or retailer for recycling advice and collection point. According to local regulations, retailers may have an obligation to take back waste batteries and waste electrical and electronic equipment free of charge.
Your contribution to the reuse and recycling of waste batteries and waste electrical and electronic equipment helps to reduce the demand of raw materials.
Waste batteries, in particular containing lithium, and waste electrical and electronic equipment contain valuable and recyclable materials, which can adversely impact
the environment and the human health if not disposed of in an environmentally compatible manner.
Delete personal data from waste equipment, if any.