TE 2395362-1 Hand Crimping Tools User Manual

: June 17, 2024
: TE

Table of Contents

TE 2395362-1 Hand Crimping Tools
Specifications
Product Usage Instructions
PRODUCT INFORMATION
Features
Product Compliance
Compatible Parts
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TE 2395362-1 Hand Crimping Tools

TE-2395362-1-Hand-Crimping-Tools-PRODUCT

Specifications

Tool Grade: Commercial Crimp Tooling
Ratchet Configuration: Operator Releasable & Adjustable
Die Sets Type: Removable/Interchangeable
Specification Type: TE Product Specification (114-)
TE Certification: Cannot be certified

The Hand Crimping Tools are designed for commercial crimp tooling applications. The ratchet configuration allows for operator-releasable and adjustable operations. The die sets are removable and interchangeable, following TE Product Specification (114-). Please note that this product cannot be certified.

Product Usage Instructions

Tool Setup:
- Ensure the hand crimping tool is clean and free from debris before use. Select the appropriate die set based on your crimping requirements.
Crimping Process:
- Insert the wire barrel into the die set securely. Apply steady pressure on the handles to crimp the wire properly. Release the handles once the crimping process is complete.
Maintenance:
- Regularly clean the tool after each use to prevent build-up and ensure smooth operation. Store the tool in a dry place away from moisture.
FAQ:
- Q: Can this tool be used for crimping different wire sizes?
- A: Yes, the tool is designed to accommodate various wire sizes by using interchangeable die sets.
- Q: Is there a warranty for this product?
- A: Please refer to the warranty information provided in the instruction sheets or contact our support at +1 800 522 6752 for assistance.

PRODUCT INFORMATION

Application Tooling > Hand Crimping Tools

Tool Grade: Commercial Crimp Tooling
Ratchet Configuration: Operator Releasable & Adjustable
Die Sets Type: Removable/Interchangeable
Specification Type: TE Product Specification (114-)
TE Certification: Cannot be certified

Features

Other

Crimp Form-Wire Barrel Type Open Barrel – F Crimp
Tool Grade Commercial Crimp Tooling
Ratchet Configuration Operator Releasable & Adjustable
Die Sets Type Removable/Interchangeable
Specification Type TE Product Specification (114-)
TE Certification Cannot be certified
Power Technology Type Manual
Tooling Type SDE Crimp Hand Tool

Product Compliance

For compliance documentation, visit the product page on TE.com>.

EU RoHS Directive 2011/65/EU Out of Scope
EU ELV Directive 2000/53/EC Out of Scope
China RoHS 2 Directive MIIT Order No 32, 2016 No Restricted Materials Above Threshold
EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JAN 2023 (233) Not Yet Reviewed
Halogen Content Not Yet Reviewed for halogen content
Solder Process Capability Not applicable for solder process capability

Product Compliance Disclaimer

This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided.
This information is subject to change.
The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2).
Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU.
Components may not be CE marked.
Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV).
Regarding the REACH Regulation, the information TE provides on SVHC in articles for this part number is based on the latest European Chemicals Agency (ECHA) ‘Guidance on requirements for substances in articles’ posted at this URL: https://echa.europa.eu/guidance-documents/guidance-onreach.