Dynamic Master MX410 Professional Hand Mixer User Guide
- June 15, 2024
- Dynamic
Table of Contents
Dynamic Master MX410 Professional Hand Mixer
Product Information
Specifications
- Product Name: Master MX410
- Model Number: 551.091
- Motor Type: Electric
- Blade Type: Moving Blade
- Power Source: Plug-In
- Warranty: 1 year against manufacturing defects
Product Usage Instructions
Safety Precautions
- Never operate the device without supervision.
- Do not turn on the device when the blade is submerged.
- Turn off the device before removing it from the liquid.
- Turn off and unplug the device before cleaning.
- Ensure no liquid enters the motor while using or cleaning the device.
- Do not clean the device with a water jet or steam cleaner if it has detachable parts.
Use
This device is designed for various food preparations, including but not limited to:
- Mixing and blending soups
- Making purees
- Preparing batters and sauces
- Cutting vegetables and salads
Please note that this device should only be used for food preparations. Contact us for any other intended use.
Operation
This device can be used by children aged 8 years and above, as well as individuals with limited physical, sensory, or mental abilities, or lack of experience or knowledge, provided they are supervised or have received instructions on the safe use of the device and understand the associated risks. Children should not play with the device.
To operate the device, follow these steps:
- Press the safety button (BS) and then tighten the control handle (LC).
- The device is now powered on, and you can release the safety button.
-
If you want the device to work in a continuous mode, switch it on and press the lock button (BV). The device will now operate continuously.
-
To stop the device, release the lock of the control handle.
Maintenance
To clean the device, you can use a sponge or damp cloth. To clean the inside of the bell, and submerge the shaft without remaining the protective cap on the bottom of the pot (as shown in the diagram).
FAQ
Q: Can I use accessories not recommended by the manufacturer?
-
A : No, it is not recommended to use accessories that are not recommended by the manufacturer as they may be dangerous and cause damage to the device.
-
Always use original parts and accessories.
Q: How long is the warranty for this product?
- A : This electric device has a warranty of one year against manufacturing defects from the date of purchase.
Q: How can I contact customer support for service or warranty?
- A: You can contact your dealer or send an email to contact@dynamicmixers.com for service or warranty-related inquiries.
Description
- A) Control Lever
- B) Motorblock
- C) Stainless steel mixer tube
- D) Stainless steel guard
- Tension: …………………………………………………………………………………………………………..110/120V – 220/240 V – 50-60Hz.
- Power: …………………………………………………………………………………………………………110-120V -2,9A / 220-240V – 600W.
- Speed: …………………………………………………………………………………………………10500 trs / mn – 10500 RPM
Recommended usage time
- Expected time of use: ……………………………………………………………………………………………………………………………………………………………………………………. 5-20 mn
- Accessory length: ……………………………………..410mm – 16’
- Full length: ……………………………………………………………………. 720mm – 30’
- Weight: …………………………………………………………………………………………………………………………………………………………….. 3.5kg – 7,7Lbs
Double insulation
- Noise Level: ……………………………………………………70 dB
WARNING
- Never operate your mixer without being immersed in liquid.
- Turn off the appliance before removing it from the liquid.
- After using it, unplug the machine. Do not allow liquid to enter the motor during use or cleaning.
- For detachable mixers, disconnect the machine when changing accessories.
- In case of an accidental immersion of the motor, be careful of any electrocution shock: disconnect immediately the plug of the machine.
- Warning, this product includes a moving blade. Take care when using it and when cleaning it as there is a risk of cuts.
- This appliance may be used by children at least 8 years old and by persons with reduced physical, sensory, or mental capacities or without experience or knowledge if they are correctly supervised or if they have been given instructions on how to use the appliance safely, and if they correctly understand the risks involved. Children must not play with the appliance. Cleaning and care by the user must not be performed by unsupervised children.
- These appliances are intended to be used for commercial applications, for example in kitchens of restaurants, canteens, hospitals, and in commercial enterprises such as bakeries, butcheries, etc., but not for continuous mass production of food.
- That appliance has not to be cleaned with a water jet or a steam cleaner.
- Double insulation: when servicing, use only identical replacement parts.
USE
- With its unique cutter blade, it will liquify most of your preparations. It has been designed to work in containers holding up to 100 liters.
- It can be used to blend and mix excellent soups, but also: empanadas, diced vegetables, spinach, salads, chopped greens, pancake mix, mayonnaises, etc.
- This appliance is only for use for preparing food: for any other use, please contact us.
OPERATION
- Plug your mixer into an electrical outlet. A red power indicator light will come on indicating that your mixer is ready to be used.
- Press and hold down the security button (BS) and then press on the control lever (LC), Once the ma-chine is started you may release the security button (BS).
- If you prefer to lock the control lever for continuous use you may press the locking switch (BV)
- To turn off your unit press and release the control lever (G).
Precautions for the use of the appliance:
- Never run the appliance outside a recipient.
- After each use unplug the appliance.
- For higher effectiveness, we recommend holding the appliance in a slanting position without the protective bell touching the bottom of the pan as shown in the sketches opposite (2/3 of the way down the tube).
- Never use accessories not recommended by the manufacturer.
- They may be a hazard for the user and may damage the device.
- Only use original items and accessories.
CARE
- The appliance can be cleaned using a sponge or a slightly damp cloth.
- To clean the inside of the bell, run the appliance with the tube and its bell in clean water for 3 seconds.
- Clean the stand in clean water using washing-up liquid if necessary.
- Be careful : risk of cuts when cleaning the mixer attachment equipped with the blade.
- NEVER clean the appliance using a hose. NEVER immerse the motor block in liquid.
MAINTENANCE
It is preferable to regularly check:
- The power cable is in good condition (the copper wires in the cable should not be visible).
- That the tube is watertight (by visually inspecting the seal condition after having removed the blades).
- That the blades are sharp.
- If the power cable is damaged, it must be replaced by the manufacturer, its after-selfs service, or people of similar qualifications to avoid danger.
ELECTRIC REQUIREMENTS
- The mixer of a class 2 category (double insulation) is powered by a single-phase alternating current and does not require a “u” ground plug.
- The installation must be protected by a ground fault circuit breaker and a 10 A caliber fuse.
- Use a standard 10/16 single-phased socket.
- Check that the electricity supply voltage and the value on the mixer specifications plate are compatible.
CERTIFICATE OF CONFORMITY CUSTOMER SERVICE AND WARRANTY
This machine is under CE standards and:
Customer service and warranty:
- Should your unit require service, contact your distributor for the nearest authorized service center if you wish your unit to be serviced by the manufacturer ship it to.
- CANADA SERVICE CENTRE DYNAMIC INTERNATIONAL LTD. 3227 boul. Pitfield
- Saint-Laurent – Québec H4S-1H3
- Toll-free phone: 1-800-267-7794 – Toll-free fax: 1-877- 668-6623 Local Phone : (514) 956 0127 – Local Fax : (514) 956 8983
- USA SERVICE CENTRE DYNAMIC USA
- 1320 route 9 # 1352 – Champlain, NY – 12919
- Toll-free phone: 1-800-267-7794
- Toll-free fax: 1-877- 668-6623
- DYNAMIC FRANCE S.A.S.
- 518 rue Léo Baekeland – B.P.57
- 85290 Mortagne-sur-Sèvre Cedex – FRANCE
- Tél. +33 (0)2 51 63 02 72 – Fax : +33 (0)2 51 63 02 73
- e-mail: contact@dynamicmixers.com
Warranty
- Your new Dynamic product is warranted to the original purchaser, for one year, from the date of purchase.
- DYNAMIC war-rants products to be free of manufacturing defects for one year from the day of original shipment, covering all parts and labor.
- Damage caused by improper use, accident, and/or abuse is not considered to be manufacturing defects.
- DYNAMIC will repair or replace, at its discretion, defective products returned to an authorized warranty repair center, freight prepaid one way.
- Unauthorized work on the products during the warranty period will void this warranty.
- The portion below must be sent to the Service Centre within 10 days from the purchase date.
Electrical diagram
- Mains input
- Filter
- Motor output
- Security
- Control lever
- Locking system
- Control lever
Schematic and part list
MX004 – Master MX410
0504 | Carbon brushes (2) |
---|---|
0601 | Ball bearing |
0726 | Squeezing washer |
0768 | Safety button, return spring |
0862 | Wall bracket |
0950 | Strain relief 220-240 V |
0999.20 | Filter C.E.M. 220-240 V |
1017 | Warning label |
1021 | Dynamic label |
1067 | ID label 220-240 V |
1068 | ID label 110-120 V |
1237 | Micro switch |
1241 | Power on indicator light 220-240 V |
1241.1 | Power on indicator light 110-120 V |
2001 | Control lever |
2002 | Control lever protector |
2003 | Circuit board 220-240 V |
(4 switches + capacitor)
2003.1| Circuit board 110-120 V
(4 switches + capacitor)
2004| Upper half handle (button side)
2005| Lower half handle (label side)
2006| Motor housing + carbon brush
holders
2008| Speed control plug
2010
| ****
Complete handle 220-240 V
2010.1
| ****
Complete handle 110-120 V
2011.22| Stator 220-240 V (carter + carbon
brush holders)
2011.1| Stator 110-120 V (carter + carbon
brush holders)
2012| Power cord 220-240 V > 2002
2012.1| Power cord 110-120 V > 2002
2012.2| Power cord (UK) > 2002
2012.3| Power cord (Australia) > 2002
2021| Variable speed knob
2023| Variable speed circuit board
220-240 V
2023.1| Variable speed circuit board
110-120 V
7903| Brace screws (4)
7910| Emulsifying blade
7933| Fan
9008.11| Rotor 110-120 V
9008.22| Rotor 220-240 V
9011| Power cord 220-240 V < 2002
9014| Handle screws (4)
9023| Field brace screws (2)
9043| Carbon brush wires 220-240 V
9143| Carbon brush wires 110-120 V
45710| Safety plug
MX004 – Master MX410
0607 | Waterproof seal |
---|---|
1186 | Bearing holder + seal |
**2007** | **** Complete foot assembly |
**2009** | Foot assembly w/ bearing assembly |
7910 | Emulsifying blade |
**7916** | **** Lower bearing assembly |
7917 | Cutter blade w/ screw |
9025 | Motor ball bearing sleeve |
9026 | Braces (4) |
9131 | Shaft |
**9164** | Shaft, lower bearing & cutter assembly |
**9902** | Lower bearing screws – Stainless steel (3) |
Documents / Resources
|
Dynamic Master MX410 Professional Hand
Mixer
[pdf] User Guide
Master MX410 Professional Hand Mixer, Master MX410, Professional Hand Mixer,
Hand Mixer, Mixer
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>