Hanwha HCZ-6321 High Resolution 32X Zoom Color Camera User Guide

June 9, 2024
Hanwha

Hanwha HCZ-6321 High Resolution 32X Zoom Color Camera User Guide
Hanwha HCZ-6321 High Resolution 32X Zoom Color
Camera

Instruction

  1. a AHD Jack: Sends video signal and connects to the Video IN port of a AHDDVR.
  2. CVBS Jack: Analog video output port. (for installation)
  3. Function Setup switch Press the Function Setup switch to display the menu screen. After the menu is displayed on the screen, move the cursor <up/down/left/right> to select the desired item or to change the value or status. Also, moving the cursor up/down/left/right to control zoom and focus functions. moving the cursor down : To widen the view. (ZOOM OUT) moving the cursor up : To close in on a far object. (ZOOM IN) moving the cursor left : To see a near object clearly. moving the cursor right : To see a far object clearly.
  4. Power LED: Illuminates when power is supplied.
  5. Power   Input   Terminal: Power supply terminal (DC12V±10%)
  6. RJ-45 JACK: Terminals, such as RS-485 communications, MD OUT, ZOOM, and FOCUS, EX_DN are included.

Name| Cable colo| Description| Name| Cable color| Description
---|---|---|---|---|---
ZOOM| ORANG| | GND| BLUE| –
FOCUS| WHITE/ORANGE| EX DN| WHITE/BLUE| External D/N
COM| GREEN| 485| BROWN| RS-485 communication
MD| WHITE/GREEN| 485-| WHITE/BROWN| RS-485 communication

Safety Information

CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN

CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

**** This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.

**** This exclamation point symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING

  • To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture.
  • To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.

WARNING

  1. Be sure to use only the standard adapter that is specified in the specification sheet. Using any other adapter could cause fire, electrical shock, or damage to the product.
  2. Incorrectly connecting the power supply or replacing battery may cause explosion, fire, electric shock, or damage to the product.
  3. Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause abnormal heat generation or fire.
  4. Securely plug the power cord into the power receptacle. insecure connection may cause fire.
  5. When installing the camera, fasten it securely and firmly. The fall of camera may cause personal injury.
  6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers filled with water on top of the camera. doing so may cause personal injury due to fire, electric shock, or falling objects.
  7. Do not install the unit in humid, dusty, or sooty locations. doing so may cause fire or electric shock.
  8. If any unusual smells or smoke come from the unit, stop using the product. in such case, immediately disconnect the power source and contact the service center. continued use in such a condition may cause fire or electric shock.
  9. If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way. (Hanwha Vision is not liable for problems caused by unauthorized modifications or attempted repair.)
  10. When cleaning, do not spray water directly onto parts of the product. doing so may cause fire or electric shock.

CAUTION

  1. Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibrationor magnetic interference.
  2. Do not install in a location subject to high temperature, low temperature, or high humidity. Doing so may cause fire or electric shock.
  3. If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.
  4. Remove the power plug from the outlet when then there is a lightning. Neglecting to do so may cause fire or damage to the product.
  5. Keep out of direct sunlight and heat radiation sources. It may cause fire.
  6. Install it in a place with good ventilation.
  7. Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CMOS image sensor.
  8. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
  9. The Mains plug is used as a disconnect device and shall stay readily operable at any time.
  10. Do not expose the camera to radioactivity. Radioactivity exposure may damage the CMOS.

Important Safety Instructions

  1. Read these instructions.

  2. Keep these instructions.

  3. Heed all warnings.

  4. Follow all instructions.

  5. Do not use this apparatus near water.

  6. Clean only with dry cloth.

  7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

  8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat.

  9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

  10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

  11. Only use attachments/accessories specified by the manufacturer.

  12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

  13. Unplug this apparatus when a card is used. Use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
    Symbol

  14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

**** Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Correct Disposal of This Product (Waste Electrical & Electronic

Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems.)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation.

Head Office
6, do, 463-400 Rep. of KOREA
Tel : +82.70.7147.8753
Fax : +82.31.8018.3740
www.HanwhaVision.com

Hanwha Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Hanwha User Manuals

Related Manuals