Proctor-Silex 70810 Quick Clean Food Processor Robot Culinaire Instruction Manual
- June 4, 2024
- Proctor Silex
Table of Contents
- Proctor-Silex 70810 Quick Clean Food Processor Robot Culinaire
- IMPORTANT SAFEGUARDS
- SAVE THESE INSTRUCTIONS
- Parts and Features
- How to Use Stainless Steel Chopping Blade
- How to Use Reversible Slicing/Shredding Disc
- Tips and Techniques
- Processing Chart
- Care and Cleaning
- Troubleshooting
- Limited Warranty
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Proctor-Silex 70810 Quick Clean Food Processor Robot Culinaire
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:
-
Read all instructions.
-
This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety.
-
This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
-
Close supervision is necessary when any appliance is used near children. Children should be supervised to ensure that they do not play with the appliance.
-
To protect against risk of electrical shock, do not put cord, plug, base, or motor in water or other liquid.
-
Turn the appliance OFF ( ), then unplug from outlet when
not in use, before putting on or taking off parts, and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord. -
Avoid contacting moving parts. Keep fingers out of feed chute.
-
Keep hands and utensils away from moving blade and disc while processing food to reduce the risk of severe personal injury and/or damage to the food processor. A rubber scraper may be used but must be used ONLY when the food processor is not running.
-
Blades are sharp. Handle cutting blades carefully when inserting or removing, emptying the bowl, and during cleaning. Store out of reach of children.
-
To reduce the risk of injury, be sure to insert or remove blade and disc using hubs provided for this purpose. Use caution when removing blade and disc from the bowl, when emptying the bowl, and when cleaning.
-
Do not operate any appliance with a damaged supply cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. Supply cord replacement and repairs must be conducted by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard. Contact Customer Service for information on examination, repair, or adjustment as set forth in the Limited Warranty.
-
The use of attachments not recommended or sold by the appliance manufacturer may cause fire, electric shock, or personal injury.
-
Do not use your food processor if any part is broken.
-
Do not use outdoors.
-
Do not let cord hang over edge of table or counter or touch hot surfaces, including stove.
-
Do not place on or near a hot gas or electric burner, or in a heated oven.
-
Check that the appliance is OFF ( ) before plugging cord into wall outlet. To disconnect, turn the control to OFF ( ); then remove plug from wall outlet. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
-
Be sure to turn switch to OFF ( ) position after each use. Always use the pushers to clear the feed chute. When
this method is not possible, unplug cord from outlet and disassemble unit to remove the remaining food. -
Be certain lid is securely locked in place before operating appliance.
-
Never feed food into feed chute by hand. Always use the food pushers.
-
Do not attempt to defeat any interlock mechanism.
-
To reduce the risk of injury, never place cutting blade or disc on base without first putting bowl properly in place.
-
Make sure the blade or disc has come to a full stop before removing lid.
-
Do not use appliance for other than intended purpose.
-
The appliance is not intended for commercial, professional, or industrial use. It is designed and built exclusively for household use only.
-
Never use appliance for a longer period or with a larger amount of ingredients other than that recommended by appliance manufacturer.
-
Be careful if hot liquid is poured into the food processor bowl as it can be ejected out of the appliance due to a sudden steaming.
-
Do not fill the bowl above the marked maximum fill line (or rated capacity) to avoid risk of injury due to damage to the cover or bowl.
-
CAUTION! In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
-
The maximum rating of this unit is based on using the chopping blade. Using the slicing/shredding disc may draw significantly less power.
SAVE THESE INSTRUCTIONS
Other Consumer Safety Information This appliance is intended for household use only.
WARNING Electrical Shock Hazard: This appliance is provided with a polarized plug (one wide blade) to reduce the risk of electric shock. The plug fits only one way into a polarized outlet. Do not defeat the safety purpose of the plug by modifying the plug in any way or by using an adapter. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, have an electrician replace the outlet.
The length of the cord used on this appliance was selected to reduce the hazards of becoming tangled in or tripping over a longer cord. If a longer cord is necessary, an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the rating of the appliance. Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or accidentally tripped over. To avoid an electrical circuit overload, do not use another high-wattage appliance on the same circuit with this appliance.
Parts and Features
To order parts, visit: proctorsilex.com/parts
1 | Small Food Pusher |
---|---|
2 | Large Food Pusher |
3 | Lid with Clips |
4 | Reversible Slicing/Shredding Disc |
5 | Finger Holes |
6 | Soap Dispensing Wells |
7 | Agitator Disc |
8 | Stainless Steel Chopping Blade |
9 | CLEAN Line: (2 1/2 cups/592 mL) |
10 | Bowl |
11 | Motor Shaft |
12 | Tower |
13 | Base |
14 | Speed Control Dial |
15 | On/Low to Medium Speed Range |
16 | On Light |
17 | (Off) |
18 | On/Medium to High Speed |
19 | Bowl Interlock Tab |
20 | Tower Interlock |
Speed Control Dial: The infinitely variable Speed Control Dial allows you to choose the precise speed needed for refining food textures to your liking. When unsure which speed to select, start at a lower speed and increase gradually.
Lid and Tower Interlock: The stackable design is easy to assemble with no difficult twist locking. Align Tower, Bowl, and Lid Tabs and snap Lid Clips in place
How to Use Stainless Steel Chopping Blade
NOTE : When processing food, use only one blade or disc at a time.
-
Place Bowl on Base with handle toward right side of Base. Carefully slide Stainless Steel Chopping Blade down onto Motor Shaft.
-
Add food to Bowl. Food pieces should be similar in size and small enough to be tossed around inside Bowl. Place Lid on Bowl, aligning Pour Spout on Lid with Pour Spout on Bowl. Ensure that Lid Interlock Tab aligns with Tower Interlock on Base. Push Lid Clips down until they snap into place.
-
Place Large Food Pusher in feed chute with FRONT facing forward.
WARNING Laceration Hazard.
Always use food pusher to feed food into the chute. Never push food through chute with hands or other objects. -
Plug into outlet. For chopping, turn Speed Control Dial On. Light will illuminate. Adjust Dial to desired speed and press START button. Process for short periods of time or press PULSE button for short bursts of power on highest speed. For mixing/puree, adjust Dial to Low to Medium Speed range. Press START button and increase gradually to desired speed. Oscillating between higher and lower speeds may result in smoother purees when processing recipes like hummus and nut butters.
NOTE : When chopping foods, check progress frequently for best results. Many foods are well chopped after 3-4 pulses. -
When finished, press STOP and turn Dial to (Off).
-
Unplug.
-
To remove Lid, unlock Clips and push Lid up using your thumb on rim of Lid near the handle for leverage.
-
Carefully remove Stainless Steel Chopping Blade by grasping plastic hub and pulling up to remove from Motor Shaft. Lift Bowl straight up to remove food.
How to Use Reversible Slicing/Shredding Disc
NOTES:
- When processing food, use only one blade or disc at a time.
- Soft cheese like mozzarella should be placed in the freezer for 30 minutes prior to processing to ensure it is firm enough for shredding.
WARNING Laceration Hazard.
Always use food pusher to feed food into the chute. Never push food through
chute with hands or other objects
-
Place Bowl on Base. Make sure protective cover has been removed from Disc to prevent damage and scratches to Bowl. Carefully insert fingers into two Finger Holes in Disc and place onto Motor Shaft with desired function facing up. (“SLICE” or “SHRED” is stamped on one side of Disc).
-
Place Lid on Bowl, making sure to align pour spout on Lid with pour spout on Bowl. Ensure that Lid Interlock Tab aligns with Tower Interlock on Base. Push Lid Clips down and in until they snap into place.
-
For larger foods: Place Large Food Pusher in feed chute with FRONT facing forward. For smaller, thinner foods: Follow instructions for larger foods. Place food into small feed chute and use Small Food Pusher to push food.
-
Plug into outlet. Turn Speed Control Dial to desired speed in Low to Medium Speed range and press START.
-
When finished, press STOP and turn Dial to (Off).
-
Unplug.
WARNING Laceration Hazard. Always unplug unit before removing lid. -
To remove Lid, unlock Clips and push Lid up using your thumb on the rim of Lid near the handle for leverage.
-
Carefully insert fingers into two Finger Holes on Disc and pull up to remove from Motor Shaft.
-
Lift Bowl straight up and remove food.
Tips and Techniques
- For a more uniform consistency, food pieces should be similar in size and small enough to be tossed around inside Bowl.
- This Food Processor is excellent to chop, mix, slice, or shred most foods. However, to maintain peak performance, do not use your Food Processor for the following: grinding coffee beans or spices, slicing frozen meats, or crushing ice.
- When chopping foods, using PULSE or a low speed setting on Speed Control Dial for short periods will produce best results.
- Operating time will depend on quantity of food being processed. Most foods can be sliced, chopped, or shredded in seconds. If unit is operated continuously for an extended period of time, let the Food Processor rest about 15 minutes before continuing.
- Do not puree or mash starchy vegetables like potatoes as they are easily overprocessed and will become gummy.
- To slice or shred cheese, use only firm cheese like Cheddar or Swiss that has been chilled for at least 30 minutes. Cheese should be processed immediately after being removed from the refrigerator. Soft cheese like mozzarella must be placed in the freezer for 30 minutes prior to processing to ensure it is firm enough for shredding.
Processing Chart
ATTACHMENT | FOODS |
---|---|
Stainless Steel Chopping Blade | Chop: nuts, meat, garlic, onions, peppers, |
celery, herbs, bread (for crumbs), cauliflower (for rice), crackers
Mince: vegetables, fruit
Mix: salad dressings, mayonnaise, marinades Puree: soups, sauces, dips, nut butters
Grate: cheese, such as Parmesan (chilled)
Slicing Disc
(SLICE side facing up)
| Cucumbers, apples, mushrooms, carrots, potatoes, cabbage, tomatoes,
pepperoni, peppers, radishes, zucchini, firm cheeses (chilled)
Shredding Disc (SHRED side facing up)| Cabbage, potatoes, carrots, zucchini,
cheese (chilled)
Care and Cleaning
WARNING Laceration Hazard.
- Handle blade carefully; it is very sharp.
- Make sure unit is turned (off) and is unplugged.
- Always unplug unit before cleaning.
WARNING Electrical Shock Hazard. Disconnect power before cleaning. Do not immerse cord, plug, or base in any liquid.
To Use CLEAN Cycle
- Remove all processed food from Bowl.
- Place Stainless Steel Chopping Blade into Bowl.
- Fill Bowl with WARM water up to CLEAN Line. Do not use HOT water as it can cause an overflow.
- Insert Agitator Disc into Bowl, rotate until Disc is seated, and add soap to Soap Dispensing Wells. Fill one Soap Dispensing Well for normal cleaning and fill both Soap Dispensing Wells for oily or sticky foods such as hummus, nut butter or cheese. Do not overfill wells with soap. Each well holds about 1/4 teaspoon liquid soap.
- If Reversible Slicing/Shredding Disc needs cleaning, place in Bowl with dirty side facing down before assembling Lid and Food Pusher. Add Lid and both Large and Small Food Pushers. Clip Lid. Always install Food Pushers before pressing CLEAN button.
- Push CLEAN button. The automatic Quick Clean™ cycle will begin. Cleaning cycle runs for approximately 30 seconds. You may press STOP/START to end the cycle early.
- When cycle ends, carefully rinse each component
NOTES:
- The seal on the Bowl may need to be cleaned by hand, if soiled while removing food from Bowl.
- It is normal for a small amount of liquid and soap to spill over the top of the feed chute. This is helpful in cleaning the chute.
- If any residue remains, wash by hand in hot, soapy water or lace in dishwasher. DO NOT use the “SANITIZE” setting as these temperatures could damage your product.
Cleaning Chart
FOOD PROCESSED
| RECOMMENDED AMOUNT OF SOAP (1 OR 2 SOAP DISPENSING WELLS)
---|---
Sauces, Dressings, Mayonnaise and Marinades| 2
Hummus| 2
Pesto| 2
Nut Butters| 2
Salsa| 1
Chopped/Shredded Fruits and Vegetables| 1
Grated/Shredded Cheese| 1
Smoothies/Milkshakes| 1
Guacamole| 1
NOTES:
- If soap suds are excessive, try using cooler water and/or less dish soap.
- In most cases, parts will be clean after running the CLEAN cycle and rinsing with clear water. Particularly sticky or oily foods, like nut butter, or vinaigrette, may require additional cleaning.
General Cleaning
- Bowl, Lid, Food Pushers, Blade and Disc are dishwasher-safe or wash in hot, soapy water. Rinse and dry.
- Wipe Base, controls, and cord with a damp cloth or sponge. If necessary, use a mild nonabrasive cleanser.
- DO NOT use “SANITIZE” setting when washing in dishwasher. “SANITIZE” cycle temperatures could damage your product. All removable parts may also be cleaned in the sink with hot, soapy water. Use caution when washing Stainless Steel Chopping Blade and Slicing/Shredding Disc.
Troubleshooting
Unit stops working, Light is not illuminated or does not operate on any speed or PULSE.
- Check to make sure unit is plugged into outlet.
- Check outlet by plugging in a working lamp or other appliance.
- You may have overloaded the circuit and blown a fuse or tripped the circuit breaker.
- Check that the Interlock Tab at the back of the Lid is properly aligned to the Tower.
- Ensure Bowl and Lid are locked in place. They may have moved slightly during processing. See “How to Use” sections.
- This Food Processor is equipped with motor overload protection.
- If the motor stops during operation due to overheating, unplug and allow it to cool down for 40 minutes before continuing.
- There might be a food jam. Turn unit off and unplug. Remove cover to check Blade. Remove any jammed food. Secure Lid onto Bowl before processing.
Unit stops working and all lights are flashing.
Turn off and unplug. Remove Lid and check to see if food is stuck. Remove food
and start the process over.
Food is not sliced or shredded uniformly.
- Packing too much food in the feed chute or pushing too hard on the Food Pusher may cause processed food to be irregularly sliced or shredded.
- Thinner foods like carrots and celery may fall sideways in large feed chute and result in uneven slices. For cleaner cuts, use smaller feed chute and pusher to keep foods upright during processing.
- For more uniform consistency, food pieces should be similar in size and small enough to be tossed around inside Bowl.
- When chopping food, using PULSE or a low speed setting on Speed Control Dial for short periods will produce best results.
Unit has a burning smell.
There may be a residue left on motor from the manufacturing process, causing a
slight odor during initial use. This will go away. If a strong odor or any
visible smoke appears, unplug unit IMMEDIATELY and contact Customer Service.
Motor seems weak.
- Selected speed may be too low. Try a faster speed.
- The food pieces may be too large. For best results, food pieces should be similar in size, and small enough to be tossed around inside Bowl.
Cheese is not shredding well.
Cheese should be processed immediately after being removed from the
refrigerator. Soft cheeses like mozzarella must be placed in the freezer for
30 minutes prior to processing to ensure it is firm enough for shredding.
Vegetables are not shredding or slicing.
Store vegetables with high water content in refrigerator prior to processing.
Room temperature vegetables are less firm and do not process as well.
Limited Warranty
This warranty applies to products purchased and used in the U.S. and Canada. This is the only express warranty for this product and is in lieu of any other warranty or condition. This product is warranted to be free from defects in material and workmanship for a period of three (3) years from the date of original purchase. During this period, your exclusive remedy is replacement of this product or any component found to be defective, at our option; however, you are responsible for all costs associated with our returning a product or component under this warranty to you. If the product or component is unavailable, we will replace with a similar one of equal or greater value.
This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions, or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as specified on the rating label (e.g., 120 V ~ 60 Hz).
We exclude all claims for special, incidental, and consequential damages caused by breach of express or implied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or conditionof merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty.
This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you. To make warranty claim, do not return this appliance to the store. Please write Hamilton Beach Brands, Inc., Customer Service Department, 4421 Waterfront Dr., Glen Allen, VA 23060, or visit proctorsilex.com/customer-service in the U.S. or proctorsilex.ca/customer- service in Canada. For faster service, locate the model, type, and series numbers on your appliance.
References
- Home | Proctor Silex Canada
- Home | Proctor Silex Canada
- Customer Service | Proctor Silex Canada
- Home | ProctorSilex.com
- Inicio | Proctor Silex Mexico
- Customer Service | ProctorSilex.com
- Parts & Accessories | ProctorSilex.com
- Wholescale - Proctor Silex