CPR CALL BLOCKER V10000 Unwanted Calls to Landline Phones User Guide

CPR CALL BLOCKER V10000 Unwanted Calls to Landline Phones

WELCOME TO YOUR CPR
The latests in call blocking technology, preprogrammed with 10,000 of the latest scam/robocall numbers plus you have the ability to block a further 2,000 numbers at the touch of the flashing Block Now button.

OVERVIEW

FRONT

1. LCD screen
2. Block Now button (flashes with incoming call)
3. Call List button
4. Block List button
5. Delete button
6. Allow List button

BACK

1. TEL1 port
2. LINE1 port
3. TEL port
4. LINE port

This product requires Caller ID service from your network provider.

Display screen

1. Displays which operating mode the Call Blocker is set to (ALLOW MODE or BLOCK MODE) and also which list menu you are in (CALL LIST, BLOCK LIST,ALLOW LIST).
2. Displays the number of times a BLOCKED call has tried to re-call.
3. Displays the amount of numbers that have been added to the BLOCK LIST.
4. Displays the Additional Blocking Features that have been activated.

Standard set up

1. Unplug the Line Cable from your telephone.
2. Take the Line Cable that you unplugged from your telephone and insert it into the LINE port of the Call Blocker.
3. Insert the short black cable provided into the TEL port. Placing the other end into the telephone.
4. The call blocker screen should now display ‘0000’. Pick up the telephone handset and check that your dial tone is working.

PARALLEL set up

1. Unplug the Line Cable from your telephone.
2. Take the Line Cable that you unplugged from your telephone and insert it into the LINE port of the Call Blocker.
3. Insert the red end of the white cable provided into the LINE1 port. Placing the other end into the telephone.
4. The call blocker screen should now display ‘0000’.
   Pick up the telephone handset and check that your dial tone is working.

Operating MODEs

You should now be set up correctly and ready to start blocking those pesky unwanted Robocalls!
The V10000 has two operating modes: Block Mode and Allow Mode.
As default the call blocker will be set in Block Mode.

Block mode

1. If the call is unwanted, simply press the flashing BLOCK NOW button.
2. The number will then be added to the BLOCK LIST and cannot call you again.
3. If using a cordless DECT phone system, press # then 2 (during a call) from any handset to activate the Block Now function. Then hang up.

Allow mode

1. When the Call Blocker is set in ALLOW MODE only numbers programmed in the ALLOW LIST can call.
2. If you want to set the Call Blocker into ALLOW MODE simply hold down the ALLOW LIST button until ‘SUCCESSFUL’ is displayed.
3. There are three ways to add numbers to the ALLOW LIST:
4. Pressing the ALLOW LIST button on a number in the CALL LIST
5. Pressing the ALLOW LIST button on a number in the BLOCK LIST
6. By Manual Entry (follow the instructions on page 11).
7. To remove a number from the ALLOW LIST scroll to and the number and hold down the DELETE button for 5 seconds.
8. If you wish to revert back to BLOCK MODE simply hold down the BLOCK LIST button until ‘SUCCESSFUL’ is displayed.

BUTTON DESCRIPTION

BLOCK NOW
By pressing the BLOCK NOW button during a call, the number will be added to the BLOCK LIST and will not be able to call you again.

BLOCK LIST
Displays the numbers that you have added to the BLOCK LIST.
To navigate through the list use the ( ) keys.

ALLOW LIST
To navigate through the numbers that you have added to the ALLOW LIST use the ( ) keys .

CALL LIST

Displays the last 20 incomming call records. To navigate through the list use the ( ) keys. To add any of the CALL LIST numbers to the BLOCK LIST simply press the BLOCK NOW button.

DELETE
To remove a number from the BLOCK or ALLOW lists, scroll to and the number and hold down the DELETE button for 5 seconds.

Home
By pressing the CALL LIST and DELETE button together you will return to the Home screen.

Programming

ADD NUMBERS TO THE BLOCK LIST OR ALLOW LIST

Pick up the telephone handset. When you have a dial tone enter number and press Block List or Allow List.

ADDITIONAL BLOCKING FEATURES

Pick up the telephone handset. When you have a dial tone. Please enter the codes on your telephone keypad you wish to apply. You will hear a single “beep” after each # to confirm a successful entry. You will hear multiple “beeps” if a code or number has been previously entered.

RESETC ALL BLOCKER BACK TO FACTORY SETTINGS

Press and hold Block List and Allow List together for 5 seconds (until “SUCCESSFUL” is displayed).

FAQ (frequently asked questions)

Q. My answering machine has stopped working correctly?
A. The Call Blocker silences the first 1 or 2 ‘rings’ on the line while it checks the BLOCK LIST, this can cause some answering machines to initiate earlier than usual. To resolve this try increasing the number of rings before the answering machine answers a call to 6. If this doesn’t work try connecting the Call Blocker in the parallel set up.
Q. I keep getting a busy signal when entering codes?
A. Set up the Call Blocker using the standard method and hold down the Block Now button for 5 – 10 seconds, this will enable programming mode which will allow codes to be entered.
Q. Why is my call blocker blocking wanted calls?
A. Ensure that you have an active caller ID subscription, otherwise the call blocker will treat all.calls as unwanted. Caller I.D is required for the Call Blocker to read the number
Q. Why do callers that I have blocked still come through?
A. This is a ‘Rogue Dialler’ or a ‘VOIP’ caller, they use computers to call numerous people at once and spoof their number to allow themselves to contact people continuously. Please enter the following code with a dial tone:

• • 7 # 6 # To block ‘Rogue Diallers‘
    Q. Why is there is an error message on my call blocker?
    A. This is caused by a power surge on the line that has caused the Call Blocker to shut down protecting itself from damage, please disconnect the call blocker from the power for 1 hour, then reconnect.
    Q. I’m having dificulty adding programming codes?
    A. We are here to help, our technical support team can assist you by remotely accessing your call blocker while you are on the phone to us. WE CAN INSERT THE CODES YOU WISH TO ADD.
    Q. How do I Unblock/Block a Cell Phone Number (USA)?
    A. To unblock a Cell Phone Number, get a dial tone and enter: 6 # 1 FULL NUMBER #, to Block a Cell Phone Number enter: * 7 # 1 FULL NUMBER #

For more FAQ’s please visit www.support.cprcallblockerusa.com or call our tech support team on: 888 – 507 – 7486

EXTENDED WARRANTY

DONT FORGET! You have a FREE 1 year manufacturers warranty with your Call Blocker, you can extend to a 3-Year warranty for only $9.99.

Register your warranty: www.callblockerusa.com/warranty

Did We Make You Happy?
Why not leave a review?

Simply visit: www.callblockerusa.com

Did We Do Something Wrong?
Let us put it right!

Simply contact our customer service team and we will be happy to fix it for you.

DON’T FORGET TO REGISTER YOUR WARRANTY
Please visit: www.callblockerusa.com/warranty
For technical support please visit www.support.cprcallblockerusa.com or call our tech support team on: 888-507-7486

OUR MISSION

CPR Call Blocker was created to keep people safe from scam and nuisance robocalls. Proving a simple, low cost, efective blocking solution has always been at the forefront of its creation.

CPR Call Blocker now helps over 1,000,000 home owners and businesses in over twelve countries solve their nuisance robocall problems.

CPR now design and manufactures a range of helpfull products from cell phones to GPS Tracking emergency assit technology. For more information on our innovative products please visit www.callblockerusa.com.

We would like to thank all our customers and partners in helping us achieve the following Awards:

Thank you for purchasing the V10000
The Ultimate Call Blocker from the

Contact Us
Skype: cprcallblocker
[email protected]
www.callblockerusa.com

Tech Support
USA: 888-507-7486
AUS: 1 800 187 358
UK: 0800 652 7780

CPR Global Tech
2711 Centerville Road
Wilmington
Delaware | 19808 – 1645

References

• USA #1 CPR Call Blocker for Landlines Home Phones | Robocall Blocker.
• Warranty - CPR Call Blockers.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>