ADA INSTRUMENTS А00449 Cube 2-360 Line Laser User Manual

: June 6, 2024
: ADA INSTRUMENTS

OPERATING MANUAL
CUBE 2-360
Line Laser
adainstruments.com

THE MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES (NOT HAVING AN IMPACT ON THE SPECIFICATIONS) TO THE DESIGN, COMPLETE SET WITHOUT GIVING PRIOR WARNING.

APPLICATION

Line laser ADA CUBE 2-360 is designed to check the horizontal and vertical position of the surfaces of the elements of building structures and also to transfer the angle of inclination of the structural part to similar parts during construction and installation works.

SPECIFICATIONS

Laser beam ………………………………………… Horizontal line 360° vertical line 360 °
Light sources ……………………………………… 2 laser diodes with laser emission wavelength of 620-690nm
Laser safety class ………………………………. Class 2, <1mW
Accuracy …………………………………………….. ±1/8 in at 30 ft (3 mm/10 m)
Self-leveling range …………………………….. ±4°
Operating range with/without receiver …… 230/65 ft (70/20 m)
Power source …………………………………….. 3 alkaline batteries, AA type
Operation time………………………………….. Approx.15 hours, if everything is on
Tripod thread …………………………………….. 2×1/4″
Operating temperature ……………………. 23º F to 113º F (-5°C +45°C)
Weight …………………………………………………..0,86 lb (390 g)

LASER LINES

FEATURES

Laser lines on/off
Indoor/outdoor operating mode
Battery compartment
Tripod mount 1/4”
Compensator switch (ON/X/OFF)
Vertical laser window
Horizontal laser window

CHANGE OF BATTERIES

Open the battery compartment. Insert batteries. Take care to correct polarity. Close battery compartment. ATTENTION: If you are not going to use an instrument for a long time, take out batteries.

OPERATION

Cube 2-360 is a reliable and convenient line laser. It will be an irreplaceable tool for many years. Place the line laser on the working surface or fix it on the tripod/rod or wall mount (depends on the complete set). Set the compensator switch (5) into the position ON. Two laser beams will be ON. If the switch (5) is in the position ON, the tool is switched ON and the compensator works. Visual alarm (blinking lines) and sound alarm inform that the tool is out of the compensation range ±4º. Align the line laser in the horizontal plane.

The intermediate position of the switch (5) indicates that the tool is ON, but the compensator is locked. And there is no warning when the tool is in the tilt position. If the switch (5) is OFF, that means that the tool is switched OFF and the compensator is locked. Press button (1) once horizontal beam is ON. Press button (1) once again vertical beam is ON. Press button (1) once again vertical and horizontal beams are ON. Press button (2) once. Outdoor mode is activated. Press button (2) once again. The line laser begins to work in indoor mode.

TO CHECK THE ACCURACY OF LINE LASER (SLOPE OF PLANE)

Place the line laser on the tripod 5m away from the wall so the horizontal laser line will be directed to the wall. Switch on the power. The line laser starts to self-level. Mark point A on the wall to show the contact of the laser beam with the wall. Turn the line laser by 90° and mark points, D on the wall. Measure distance “h” between the highest and lowest points (these are A and D points in the picture). If “h” is 6 mm, the line laser accuracy is good. If “h” exceeds 6 mm, apply service center.

TO CHECK PLUMB

Choose a wall and set laser 5 m away from the wall. Hang a plumb with a length of 2.5 m on the wall. Turn on the line laser and make the vertical laser line meet the point of the plumb. The accuracy of the line is in the range if the vertical line doesn’t exceed (up or down) the accuracy that is shown in the specifications (±3 mm/10 m). If the accuracy isn’t corresponding with claimed accuracy, contact the authorized service center.

Note: Because of the construction of the laser emitter laser beam may be inhomogeneous and has different intensities of brightness along the perimeter in different light conditions. Inhomogeneous laser beam: laser patch of light but the center of the laser beam is identified. Different laser beam brightness: difference of intensity is up to 50%.

CARE AND CLEANING

Please handle line laser with care. Clean with a soft cloth only after any use. If necessary damp cloth with some water. If the instrument is wet clean and dry it carefully. Pack it up only if it is perfectly dry. Transport in original container/case only. Note: During transport On/Off compensator lock (5) must be set to position “OFF”. Disregard may lead to damage of compensator.

SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS

Measurements through glass or plastic windows;
Dirty laser emitting window;
After line laser has been dropped or hit. Please check the accuracy;
Large fluctuation of temperature: if the instrument will be used in cold areas after it has been stored in warm areas (or the other way round) please wait some minutes before carrying out measurements.

ELECTROMAGNETIC ACCEPTABILITY (EMC)

It cannot be completely excluded that this instrument will disturb other instruments (e.g. navigation systems);
will be disturbed by other instruments (e.g. intensive electromagnetic radiation nearby industrial facilities or radio transmitters).

LASER CLASS 2 WARNING LABEL ON THE LINE LASER

LASER CLASSIFICATION

The line laser is a laser class 2 laser product according to DIN IEC 608251:2014-05 and Class II.

SAFETY INSTRUCTIONS

Please follow up on the instructions given in the operators’ manual.
Do not stare into the beam. The laser beam can lead to an eye injury (even from greater distances).
Do not aim the laser beam at persons or animals. The laser plane should be set up above the eye level of persons. Use the instrument for measuring jobs only.
Do not open instrument housing. Repairs should be carried out by authorized workshops only. Please contact your local dealer.
Do not remove warning labels or safety instructions.
Keep instruments away from children.
Do not use instruments in an explosive environment.

WARRANTY

This product is warranted by the manufacturer to the original purchaser to be free from defects in material and workmanship under normal use for a period of two (2) years from the date of purchase. During the warranty period, and upon proof of purchase, the product will be repaired or replaced (with the same or similar model at manufactures option), without charge for either part of labor. In case of a defect please contact the dealer where you originally purchased this product. The warranty will not apply to this product if it has been misused, abused, or altered. Without limiting the foregoing, leakage of the battery, bending, or dropping the unit are presumed to be defects resulting from misuse or abuse.

EXCEPTIONS FROM RESPONSIBILITY

The user of this product is expected to follow the instructions given in the operators’ manual. Although all instruments left our warehouse in perfect condition and adjustment the user is expected to carry out periodic checks of the product’s accuracy and general performance. The manufacturer, or its representatives, assumes no responsibility for the results of a faulty or intentional usage or misuse including any direct, indirect, consequential damage, and loss of profits. The manufacturer, or its representatives, assumes no responsibility for consequential damage, and loss of profits by any disaster (earthquake, storm, flood …), fire, accident, or an act of a third party and/or usage in other than usual conditions.

The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits due to a change of data, loss of data and interruption of business, etc., caused by using the product or an unusable product. The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits caused by usage other than explained in the users’ manual.

The manufacturer, or its representatives, assumes no responsibility for damage caused by wrong movement or action due to connecting with other products.

WARRANTY DOESN’T EXTEND TO THE FOLLOWING CASES:

If the standard or serial product number will be changed, erased, removed, or will be unreadable.
Periodic maintenance, repair, or changing parts as a result of their normal runout.
All adaptations and modifications with the purpose of improvement and expansion of the normal sphere of product application, mentioned in the service instruction, without the tentative written agreement of the expert provider.
Service by anyone other than an authorized service center.
Damage to products or parts caused by misuse, including, without limitation, misapplication or negligence of the terms of service instruction.
Power supply units, chargers, accessories, wearing parts.
Products, damaged from mishandling, faulty adjustment, maintenance with low-quality and non-standard materials, presence of any liquids and foreign objects inside the product.
Acts of God and/or actions of third persons.
In case of unwarranted repair till the end of the warranty period because of damages during the operation of the product, it’s a transportation and storing, the warranty doesn’t resume.

WARRANTY CARD

Name and model of the product __
Serial number___Date of sale_
Name of commercial organization ____ stamp of commercial organization

The warranty period for the instrument exploitation is 24 months after the date of original retail purchase.

During this warranty period, the owner of the product has the right to free repair of his instrument in case of manufacturing defects.

Warranty is valid only with original warranty card, fully and clear filled (stamp or mark of the seller is obligatory).

Technical examination of instruments for fault identification which is under the warranty is made only in the authorized service center. In no event shall the manufacturer be liable before the client for direct or consequential damages, loss of profit, or any other damage which occurs as the result of the instrument outage.

The product is received in the state of operability, without any visible damages, in full completeness. It is tested in my presence. I have no complaints about the product quality. I am familiar with the conditions of warranty service and I agree.

purchaser signature ___

Before operating you should read service instructions!
If you have any questions about the warranty service and technical support contact the seller of this product

ADA International Group Ltd., No.6 Building, Hanjiang West Road #128, Changzhou New District, Jiangsu, China
Made In China
adainstruments.com