Beacon LIGHTING 261205 Bahn Large Table Lamp Instruction Manual
- June 4, 2024
- Beacon LIGHTING
Table of Contents
Installation Instructions
Bahn
SKU# 261205, 261206
Rated Voltage 220-240V~ 50Hz
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation, and use. Please keep the instructions for future reference.
Warranty
- This fitting is covered by a 12-month warranty from the date of purchase. Please retain the proof of purchase.
- Warranty will be void if there is any damage due to improper usage or modification to the fitting.
- Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the warranty.
Installation requirements
-
Select a suitable location for this light fitting;
– Ensure it is on a flat and stable surface.
– This product is suitable for indoor use only.
– Do not place flammable material near or over the fitting.
– Ensure the fitting is not installed next to any air vents and is not in any moist or damp areas. -
Do not exceed the maximum wattage rating.
-
Take care not to pull any electrical wires during unpacking as this may damage the connection.
-
Lay out all the components on a smooth surface and make sure there are no components missing before assembling. If parts are missing, return the complete product to the place of purchase for inspection or replacement.
-
Check whether the fitting has been damaged during transport. Do not operate/install any product which appears damaged in any way. Return the complete product to the place of purchase for inspection, repair, or replacement.
-
Do not plug into the mains’ power socket outlet before or during assembly. Only do so after the portable lamp is fully assembled with the globe installed and is ready to use for the first time.
Installation directions
- Remove all packaging material from the product.
- Open the gate by lifting the handle (A) out of the side latch (C).
- Install a globe (B – not included) into the lamp holder (D). Do not exceed the maximum wattage rating.
- Close the gate and secure the handle (A) into the side latch (C).
- Select a suitable location for the light fitting. See the installation requirements above.
- Insert the plug (F) into the mains power socket outlet and ensure it is fully plugged in.
- Turn power on at the mains power socket outlet.
- Use the cord line switch (E) to turn the lamp on/off.
Safety tips
- Always ensure the power is OFF and the fitting has cooled down before performing any maintenance, cleaning, changing the globe, or making any adjustments to the fitting.
- The external flexible cable or cord of this luminaire cannot be replaced; if the cable or cord is damaged, the luminaire shall be destroyed.
- To avoid injury or damage to the fitting, ensure that power leads and screws are secure before connecting the power.
- Young children should be supervised to ensure that they do not play with the portable lamp.
- Handle the fitting and/or shade with care to avoid any damage or breakage.
- Select a suitable location away from liquids and hazards.
- Ensure that the fitting does not come in contact with corrosive chemicals, etc.
- To clean, wipe with a damp clean cloth. Never soak the fitting with water.
Specifications
Specifications
SKU #| 261205| 261206
Rated Voltage| 220-240V~ 50Hz
Rated Wattage| 45W Max.
Lamp Holder| ES / E27
Weight| 1.9kg| 1.4kg
Dimensions| L:210mm| W:210mm| H:490mm| L:180mm| W:180mm| H:420mm
v1.1
Documents / Resources
|
Beacon LIGHTING 261205 Bahn Large Table
Lamp
[pdf] Instruction Manual
261206, 261205, Bahn Large Table Lamp, 261205 Bahn Large Table Lamp, Large
Table Lamp, Table Lamp, Lamp
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>