tp-link UH700 USB 3.0 Hub User Guide
- June 9, 2024
- tp-link
Table of Contents
tp-link UH700 USB 3.0 Hub
ATTENTION
- Keep the hub away from water, fire, humidity or hot environments.
- Do not heavily drop or impact the hub.
- Do not attempt to disassemble, modify or fix the hub by yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us.
- Disconnect the hub from the computer before cleaning it. Do not use liquid cleaning method.
- This hub can be powered only by CE certified computers that comply with Limited Power Source (LPS).
- For best performance, the connected devices should not exceed a combined current of 4A.
- TP-Link will not be held responsible for any damage to disk or hard disk data caused by improper use.
Hardware Connection
Connect the devices as follows. The power LED will light up and the hub is
ready to use.
Usage Tips:
- The TP-Link USB 3.0 hub is plug-and-play and requires no driver for Windows, Mac 0S X or Linux systems.
- The hub is automatically turned on every time you plug the power adapter into a power outlet.
- The hub can transfer data even when the power adapter is unplugged. In this mode, the power button will not work as a power SWitch any more.
- To prevent possible data loss or corruption, avoid unplugging or plugging the power adapter when transferring data or charging.
Using the Hub
Transferring Data
This hub provides your computer with 7 additional USB 3.0 ports for Super-
speed USB 3.0 data transfer.
Usage Tips:
- The USB 3.0 ports are also compatible with USB 2.0 and USB 1.1 specifications.
- The USB 3.0 ports transfer data at a rate up to 5Gbps, but the actual rate is limited by the USB transfer rate of the connected devices.
- The performance of 2.4GHz wireless devices (wireless keyboards, mouses, etc.) may be affected when they are working to0 close to SB 3.0 devices.
Charging
The three ports on the right also provide you with a maximum Current of 1.5A
to quickly charge all kinds of mobile devices such as Android, Apple and
Windows products.
Usage Tips: If your device’s current is less than 1.5A, the charging port can automatically adjust its current supplied to your device to avoid damage.
FCC &CE
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance Could void the users authority to operate the equipment.
CE Mark Warning
- This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
EU declaration of conformity
- TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
- The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce
QR SCAN
lo ask questions, find answers, and communicate with TP-Link users or
engineers, please visit
https://community.tp-link.com to join IP-Link Community.
For technical support, the user guide and other information, visit
https://www.tp-link.com/support/
If you have any suggestions or needs on the product guides, welcome to email
techwriter@tp-link.com.cn.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>