tp-link TL-SG1005P 5-Port Gigabit Desktop PoE Switch Installation Guide

tp-link TL-SG1005P 5-Port Gigabit Desktop PoE Switch

LED Explanation

Note: For simplicity, we will take TL-SG1005P for example throughout this Guide.

Connection

Note

1. PoE ports can also connect to non-PoE devices, but only transmit data.
2. TL-SG1005LP can supply up to 30 W for each PoE port and 40 W for all PoE ports.
3. TL-SG1005P can supply up to 30 W for each PoE port and 65 W for all PoE ports.

Specifications

General Specifications

Frequently Asked Questions (FAQ)

• Q1. Why is the Power LED not lit?
  • The Power LED should be lit when the power system is working normally. If the Power LED is not lit, please try the following:
  • A1: Make sure the AC power cord is connected to the switch with power source properly.
  • A2: Make sure the voltage of the power supply meets the requirements of the input voltage of the switch.
  • A3: Make sure the power source is on.
• Q2. Why is the Link/Act LED not lit while a device is connected to the corresponding port?
  • It is recommended that you check the following items:
  • A1: Make sure that the cable connectors are firmly plugged into the switch and the device.
  • A2: Make sure the connected device is turned on and works normally.
  • A3: The cable must be less than 100 meters long (328 feet). If Extend Mode is enabled, it should be less than 250 meters (820 feet).
• Q3. Why are PoE ports not supplying power for PoE devices?
  • When the total power consumption of connected PoE devices exceeds the maximum, the PoE port with a smaller port number has higher priority. The system will cut off power to the ports with larger port numbers to ensure supplying to other ports.
  • Take TL-SG1005P as an example. If port 1, 2 and 4 are consuming 15.4 W respectively, and an additional PoE device with 19 W is connected to port 3, the system will cut off the power of port 4 to compensate for the overload.
• To ask questions, find answers, and communicate with TP-Link users or engineers, please visit https://community.tp-link.com to join TP-Link Community.
• For technical support and other information, please visit https://www.tp-link.com/support, or simply scan the QR code.
• If you have any suggestions or needs on the product guides, welcome to email techwriter@tp-link.com.cn.

Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Adapter shall be installed near the equipment and shall be easily accessible.
• Use only power supplies which are provided by manufacturer and in the origin packing of this product. If you have any questions, please don’t hesitate to contact us.

PoE Disclaimer

PoE budget calculations are based on laboratory testing. Actual PoE power budget is not
guaranteed and will vary as a result of client limitations and environmental factors.

EU Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp- link.com/en/support/ce/

UKCA Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.
The original UKCA declaration of conformity may be found at https://www.tp- link.com/support/ukca

References

• 域名售卖
• TP-Link Community
• CE Regulatory Compliance | TP-Link
• TP-Link Product Support - Wireless Networking Equipment Support
• Regulatory Compliance | TP-Link

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>