tp-link UH720 USB 3.0 7 Port Hub with 2 Charging Ports User Guide
- June 9, 2024
- tp-link
Table of Contents
tp-link UH720 USB 3.0 7 Port Hub with 2 Charging Ports User Guide
Attention
- Keep this device away from water, fire, humidity or hot environments.
- Do not heavily drop or impact this device
- Do not attempt to disassemble, modify or fix this device by yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us
- Cut off the power supply before cleaning the device. Do not use liquid cleaning method
- Use the power cord and power adapter provided with your device.
- For best performance, the connected devices should not exceed a combined current of 6.55A
- TP-LINK will not be held responsible for any damage to disk or hard disk data caused by improper use
- Use only power supplies which are provided by manufacturer and in the original packing of this product.
COPYRIGHT & TRADEMARKS
- Specifications are subject to change without notice. TP-LINK is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are registered trademarks of their respective holders.
- No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2016 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved.
http://www.tp-link.com
FCC & CE
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
For more information, please visit:
www.tp-link.com
www.tp-link.com
Hardware Connection
Connect the devices as follows. The power LED will light up and the hub is
ready to use.
Usage Tips:
- The TP-LINK USB 3.0 hub is plug-and-play and requires no driver for Windows, Mac OS X or Linux systems.
- The hub is automatically turned on every time you plug the power adapter into a power outlet.
- The hub can transfer data even when the power adapter is unplugged. In this mode, the power button will not work as a power switch any more.
- To prevent possible data loss or corruption, avoid unplugging or plugging the power adapter when transferring data or charging.
Using the Hube
Transferring Data
This hub provides your computer with 7 additional USB 3.0 ports for super-
speed USB 3.0 data transfer.
Usage Tips:
- The USB 3.0 ports are also compatible with USB 2.0 and USB 1.1 specifications.
- The USB 3.0 ports transfer data at a rate up to 5Gbps, but the actual rate is limited by the USB transfer rate of the connected devices.
- The performance of 2.4GHz wireless devices (wireless keyboards, mouses, etc.) may be affected when they are working too close to USB 3.0 devices.
Charging
This hub provides two charging ports with a maximum current of 2.4A to quickly charge all kinds of mobile devices such as Android, Apple and Windows products.
Usage Tips:
- If your device’s current is less than 2.4A, the charging port can automatically adjust its current supplied to your device to avoid damage.
- The charging ports are for charging your mobile devices only with no data transfer.