sunmi P2 Multifunction Base Smart Payment Terminal User Guide
- June 9, 2024
- SUnmI
Table of Contents
sunmi P2 Multifunction Base Smart Payment Terminal
Product Profile
- The multifunctional base provides charging, USB prot expansion, Wi-Fi Internet access and wireless data tansmission functions for Smart Payment Terminal
- If you need to change the WiFi configuration of the POS Base , First remove the networkcable of the Ethernet interface, connect the host to the POS Base WiFi, enter “192.168.1.1” on the host’s browser page, enter the router setting system (account: admin, password: admin), and enter “Wireless-Hotspot Settings” to set the WiFi name and password.
- Put POS on Base, then start charging, or access internet through the Base (Optional）
- Only support for SUNMI
Status Indication
- When you notice an unusual smell, overheating or smog, turn off the power immediately.
- Do not use in extremely hot and cold environments, such as near fire or lit cigarettes;
- Try to use it in a clean, dust-free environment to prevent smallitems from falling into the terminal;
- Do not use it near medical equipment without permission.
Statements
- The company is not responsible for the following actions
- Damage caused by use and maintenance without the conditions described in this guide;
- The company will not be responsible for any damages or problems caused by the alternatives or consumables (not the original products or approved products provided by the company). Without consent of the company. It is not authorized to make product modifications or changes.
Disclaimer
Due to product updates, some details of this document may not match the
product, please refer to the actual product, and the right to interpret this
document belongs to the company. The right to modify this guide without prior
notice is reserved
Technical specifications
For more technical specifications, please visit: www.sunmi.com.
The product information listed on this page may be updated from time to time
due to product upgrades or other reasons. SUNMI reserves the right to modify
the product information and contents on this page without notice
- EU Representative :SUNMI France SAS 186,avenue Thiers,69006 Lyon,France
- This device complies with the basic recommendations and other relevant measures in the 2014/30/EU and 2014/35/EU directive.
- This symbol means that it is forbidden to dispose the product of with normal household waste. At the end of the product life cycle, waste equipment should be taken to designated collection points, returned to the distributor when purchasing a new product, or contact your local authority representative for detailed information on WEEE recycling.
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.
Conformity CE
Hereby, Shanghai Sunmi Technology Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: https://developer.sunmi.com/docs/read/en-US/maaeghjk480
FCC compliance statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution : The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ISED Canada compliance statements
This device complies with ISED Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
This equipment complies with RSS-102 radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
Table for Names and Content Identification of Toxic and Hazardous Substances in
this Product
Shanghai Sunmi Technology Co., Ltd.
Address: Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai,
China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>