SENA Spider ST 1 Motorcycle Mesh Communication System User Guide
- June 9, 2024
- Sena
Table of Contents
SENA Spider ST 1 Motorcycle Mesh Communication System
Downloadable Sena Software
Download the SENA MOTORCYCLES App at Google Play Store or App Store.
- SENA MOTORCYCLES
- Download the following items at sena.com.
- Firmware
Sena Device Manager
- Firmware upgrade
- Device configuration setting
- Quick Start Guide,
- User’s Guide
Follow us on Facebook, YouTube, Twitter and Instagram to check the latest information and helpful tips.
SENA Technologies, Inc. Customer Support: sena.com
Product Details
Installation
- For more information about installation, refer to the User’s Guide.
- Using the Clamp Unit
- Using the Glued Surface Mounting Plate
-
Installing the Speakers
-
Installing the Wired Boom Microphone
- Installing the Wired Microphone
Mesh Intercom Antenna
- Pull the Mesh Intercom Antenna outwards slightly to unfold it.
NOTICE
- This Quick Start Guide (Version 2.0) explains how to operate the SPIDER ST1 with firmware version 2.0 or higher.
- For the operation of the SPIDER ST1 with a firmware version lower than 2.0, refer to the SPIDER ST1 Quick Start Guide (Version 1.1.0) or lower.
Icon Legend
- Tap button/Jog Dial the specified number of times
- Press and Hold button/Jog Dial for the specified amount of time
- Rotate Jog Dial clockwise (right) or counterclockwise (left).
- Rotate while Pressing Jog Dial clockwise (right) or counterclockwise (left).
- Audible prompt
Basic Operations
Powering On
Powering Off
Volume Up
Volume Down
Checking the Battery Level
Phone Pairing
-
Select SPIDER ST1 in the list of Bluetooth devices detected.
-
For more information on phone pairing, refer to the User’s Guide.
Using the Phone
- Answer a Call
- End a Call
- Reject a Call
- Voice Dial
Music Control
- Play/Pause
- Track Forward
- Track Backward
Mesh Intercom™
- Open Mesh™: communication within the same channel.
- Group Mesh™: communication within the same private group.
- For more information on Mesh Intercom, refer to the User’s Guide.
Mesh Intercom On
Mesh Intercom Off
Note: When Mesh Intercom is on, the SPIDER ST1 will automatically connect to nearby SPIDER ST1 users and the headset will be in Open Mesh (default: channel 1) initially.
Open Mesh
Channel Setting (Default: channel 1) in Open Mesh
- Using the Button
- Enter into the Channel Setting.
- Navigate between channels.
- Save the channel.
Using the SENA MOTORCYCLES App
You can select the channel through the SENA MOTORCYCLES App.
Group Mesh
Group Mesh is a closed group intercom function that allows users to join, leave, or rejoin a group intercom conversation without pairing each headset.
Creating a Group Mesh
Creating a Group Mesh requires two or more Open Mesh users.
- Users (You, B, and C) enter into Mesh Grouping to create a Group Mesh.
- When Mesh Grouping is completed, the users (You, B and C) will hear a voice prompt on their headset as Open Mesh switches to Group Mesh.
Joining an Existing Group Mesh
One of the current users in an Existing Group Mesh can allow new users (one or more) in Open Mesh to join the Existing Group Mesh.
- One (You) of the current users in the Existing Group Mesh and new users (D and F) in Open Mesh enter into Mesh Grouping to join the Existing Group Mesh.
- When Mesh Grouping is completed, the new users (D and F) will hear a voice prompt on their headset as Open Mesh switches to Group Mesh.
Enable/Disable Mic (Default: Enable)
- Users can enable/disable the microphone when communicating in a Mesh Intercom.
Reset Mesh
- If a headset in an Open Mesh or Group Mesh resets the Mesh, it will automatically return to Open Mesh (default: channel 1).
Configuration Menu
- Accessing the Configuration Menu
- Navigating Between Menu Options
- Execute Menu Options
Troubleshooting
Factory Reset
Fault Reset
Note: Fault Reset will not restore the headset to the factory default settings.
Quick Reference
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>