HOME HM-ST-B200W Steam Cleaner User Manual

HOME HM-ST-B200W Steam Cleaner

SAFETY INFORMATION

Carefully read this user´s manual and follow the mentioned instructions. Save carefully for future reference. Failure to follow the instructions there is a risk of a dangerous situation, injury, etc.

1. This appliance must not be used by children. Keep the appliance and its power cord out of reach of children.
2. This appliance may be used by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, provided they have been given supervision or instruction concerning use of the appliance in a safe manner and understand the potential hazards.
3. Children must not play with the appliance.
4. Cleaning and user maintenance must not be performed by children.
5. If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a dangerous situation.
6. Use only clean water in this appliance. Do not use non-potable water or other liquid. The maximum capacity is 300ml.
7. Always pull out the plug from the power socket after using, before cleaning or maintenance of the appliance.
8. Do not direct the steam jet or water directly onto equipment containing electrical component, e.g., the interior space of ovens.
9. The filling hole must not be open during usage.
10. When filling, always turn the appliance off first and disconnect the plug from the power socket. Follow the instructions in this manual. Never fill the appliance with water when the plug is inserted in the power socket.
11. Do not leave the appliance unattended while connected to power supply.
12. The appliance must not be used if it fell, there are visible signs of damage, or it leaks.
13. Keep the appliance out of children when the appliance is plugged, or it is cooling down.
14. To reduce the risk of the electric shock, do not immerse the appliance, its power cord or power cord plug in water or other liquid.
15. This appliance is for household use and inside the building. Do not use it outdoor.
16. Do not use the appliance near bath, shower, swimming pool, or sink with water.
17. This appliance is not intended to be operated by an external timer or remote control.
18. Before connecting the plug to the power outlet, make sure that the voltage indicated on the type plate of the appliance corresponds to the voltage in your mains socket.
19. Plug the power cord into a properly grounded electrical outlet. We recommend connecting the appliance to a separate electrical circuit. Do not use extension cables.
20. Do not place the appliance near fire or other heat sources. Place the appliance away from surfaces or objects sensitive to steam or moisture.
21. Do not let the power cord hang over the edge of the counter or table. Do not let the power supply touch the electric or gas plate or any hot surface.
22. Use the appliance only with the supplied accessories. The use of accessories that are not intended for this appliance or are not specified by the manufacturer as suitable may cause a dangerous situation.
23. Always ensure the appliance is correctly assembled before plugging it in.
24. Do not use the appliance to clean sockets, switches, electronics, etc. There is a risk of dangerous situation and damage to property.
25. Never use the appliance in places where explosives, flammable substances, etc. are used or stored.
26. Do not touch the appliance or power cord with wet or moisture hands.
27. Clean the appliance after each use. Always allow the appliance to cool down completely before cleaning.
28.  Always disconnect the power cord from the power socket when you do not use it, when you leave it unattended, before cleaning, moving, assembling, or disassembling.
29. Do not cover the appliance while in use.
30. Always disconnect the power cord by grasping the plug, not by pulling on the power cord

WARNING: HOT STEAM. Pay attention. There is a risk of scaling from steam!

WARNING: HOT SURFACE. Surface of the appliance becomes hot during operation. There is a risk of burns.

For household use only and inside building.

OVERVIEW

1. Safety cap
2. Filling tube
3. hread for attaching the long flexible hose
4. Steam nozzle
5. Connector for attaching accessories
6. Steam cleaner body
7. Power on LED light
8. Steam button
9. Safety lock
10. Handle
11. Power cord
12. Ready LED light
13. Measuring cup
14. Funnel
15. Round brush
16. Angle nozzle
17. O-ring (2 pcs)
18. Window wiper
19. Concentrator
20. Brush nozzle cloth
21. Long flexible hose
22. Brush nozzle

TECHNICAL PARAMETERS

Before first use

Remove the appliance and its accessories from the packaging. Before disposing of the packaging, be sure to remove all components. Check that the appliance and any accessories are not damaged.
Wipe the appliance surface and accessories with a slightly damp cloth. Wipe dry

Principles of steam cleaning

Steam cleaner is suitable for a quick, regular, and effective cleaning of hard surfaces at home without using chemicals. The principle of steam cleaning is based on quick transformation of cold water to hot steam which is pushed out of the steam cleaner through a nozzle. It is socalled dry steam that is formed only from a very small amount of water. Dry steam is suitable for removing dirt and grease, it is gentle to the treated surfaces as the surface only moistens. High temperature steam can kill all bacteria and sterilize the treated surfaces. Thanks to supplied attachments, the steam can penetrate even in hart-to-reach places.

Assembly and using the accessories

Long flexible hose

Screw the flexible hose and tighten firmly. You can use the flexible hose both separately and you can attach the concentrator, round brush, angle nozzle, or brush nozzle to the connector to extend the reach of the attached accessory

Concentrator

Screw the concentrator and tighten firmly.

The concentrator is suitable to remove dirt from hard-to-reach places, from corners, gaps, etc. The close the concentrator is to the treated place, the greater the cleaning efficiency will be because the temperature and steam volume are at their highest at the steam output.
The concentrator can be combined with a round brush or angle nozzle to get better results.

Round brush

You can attach the round brush on the steam cleaner connector, flexible hose connector, or concentrator. Always ensure it is firmly attached.

The brush is used to remove stubborn dirt. Stubborn dirt can be removed more easily by brushing.

Do not clean the sensitive or delicate surfaces by brush. They may be damaged.

Angle nozzle

You can attach the angle nozzle on the steam cleaner connector, flexible hose connector, or concentrator. Always ensure it is firmly attached.

The angle nozzle is used to remove dirt from hard-to-reach or narrow places, from corners, etc.

Brush nozzle

To attach the brush nozzle, align a white dot on the nozzle with a symbol of open lock on the steam cleaner and turn the nozzle clockwise till the white dot is aligned with a symbol of closed lock. Check the nozzle is correctly attached and it does not move.

The brush nozzle is used to remove dirt and dust from washable surfaces in the bathroom, to clean mirrors, working desk in the kitchen, etc.

Attach the cloth on the brush nozzle to remove dirt and dust from sensitive surfaces, e.g., from curtains or furniture, etc.

The cloth is washable so that you can re-use it. Pay attention when removing the cloth from the nozzle after use as the cloth may be very hot.

Window wiper

Attach the window wiper to brush nozzle so that the protrusions at the bottom of the wiper fit to the openings at the bottom of the nozzle. And then attach the upper part of the wiper to the nozzle until it clicks.
The window wiper is used to wipe steam and water from windows, glass door, or wall tiles.

Warning:

Always make sure the steam cleaner is switched off and unplugged when you attach or remove the accessory. Before removing the accessory, wait at least 5 minutes to cool down. The accessory becomes hot during use. There is a risk of injury or scalding from hot steam or water.

Never remove the accessory when the steam cleaner is used.

Filling the water tank

1. Place the steam cleaner on a flat, dry, and stable surface.
2. Unscrew the safety cap anti-clockwise.
3. Insert the funnel in the tank neck and pour clean and cold water inside. The maximum possible volume of the water tank is 250 ml. Use the supplied measuring cup to fill the water tank.
4. Screw the safety cap clockwise and tighten firmly.

Note:
It is recommended to use distilled water, especially if you have very hard water. That will prevent the formation of limescale. Always pour only the maximum volume into the water tank. More water in the tank will cause hot water to drip from the nozzle. If there is little water in the tank, not enough pressure will be created, and therefore little steam. You can shorten the heating time by pouring warm water.

Warning:

Never use the steam cleaner with an empty water tank. Use only clean water.

Using the steam cleaner

1. Attach the desired accessory to the steam cleaner and check the tank is fill with water.

2. Place the steam cleaner on a flat, dry, and stable surface and insert the plug to a grounded power socket.

3. The power on LED lights up and the steam cleaner will start heating. The heating time is usually 4 minutes, depending on the temperature and volume of water in the tank.

4. Once the ready LED lights up, the steam cleaner is ready to use.

5. Press the safety lock and then press the steam button. Release the safety lock and it will stay at OPEN position. The steam button is unlocked, and steam starts to flow.

6. The steam cleaner will produce steam as soon as you keep the steam button pressed. Once it is released, the steam will stop, and the safety lock will automatically pop up to LOCK position. The steam button will be locked.
   Warning:
   Be careful while using not to get scalded from the hot steam.

7.  After use, release the steam button and the safety lock will automatically pop up to LOCK position. The steam button will be locked. Disconnect the plug from the power socket. Before other manipulation (filling water, changing accessory), allow it to cool down for at least 5 minutes. Before cleaning, allow it to cool down completely.

Filling water

If you notice decrease in pressure and steam amount while using, it is necessary to add water to the tank.

Warning:

Never use the steam cleaner with an empty water tank. There is a risk of total damage.

1. Release the steam button and the safety lock will automatically pop up to LOCK position. The steam button will be locked. Place the steam cleaner on a flat, dry, and stable surface.

2. Disconnect the plug from the power socket and allow the steam cleaner to cool down for at least 5 minutes.

3. To prevent scalding from escaping steam or hot water while releasing the cap, place a dry cloth over it.

4. Carefully release the safety cap and unscrew it anti-clockwise.
   Warning:
   Never release the safety cap by force. If it is not possible to release by regular, adequate power, wait till the temperature and pressure decrease. Do not touch the metal parts of the cap. These are very hot, and they may cause scalding when misused.

5. Pour out the rest of the water from the tank.

6. Insert the funnel in the tank neck and pour clean inside.

7. Screw the safety cap clockwise and tighten firmly.

8. Wipe the hot water drops on the steam cleaner and around it with dry cloth.

9. Insert the plug to the power socket and continue in using.

Using instructions

When cleaning the window panels, pay attention the outside low temperature may lead to excessive glass tension which can even cause its cracking. Therefore, do not use the steam cleaner for cleaning windows when the outside temperature is too low.
When cleaning glass, window, or similar fragile surfaces, avoid long cleaning at one place. It is recommended to use brush nozzle with cloth which distributes the heat and steam to larger surface.
When cleaning glued, or painted surfaces, try the steam cleaner in smaller place first not to lose, or remove the paint due to heat and moisture. Clean such surfaces only for a short time and wipe dry immediately.
Do not use the steam cleaner to clean parquet, or unsealed wood.

Warning:

Do not use the steam cleaner to clean electric or electronic devices.

CLEANING AND MAINTENANCE

Before cleaning or any maintenance, always switch off the appliance, disconnect the plug from the power outlet and allow it to cool down completely. Clean the appliance after each use to prolong its life.

Warning:

Never immerse the appliance, the power cable and plug in water or any other liquid.
Do not use plastic or metal scrapers, harsh cleaners, chemicals, petrol, solvents or other similar substances to clean any parts of the appliance. The surface finish could be seriously damaged.

Emptying and rinsing the water tank

1. To prevent scalding from escaping steam or hot water while releasing the cap, place a dry cloth over it.

2. Carefully release the safety cap and unscrew it anti-clockwise.
   Warning:
   Never release the safety cap by force. If it is not possible to release by regular, adequate power, wait till the temperature and pressure decrease. Do not touch the metal parts of the cap. These are very hot, and they may cause scalding when misused.

3. Pour out the rest of the water from the tank.

4. Insert the funnel in the tank neck and pour clean inside.

5. Screw the safety cap clockwise and tighten firmly.

6. Shake the steam cleaner intensively to release the mineral deposits at the bottom of the tank.

7. Release the cap and pour out water.

8.  Allow to dry.

Removing limescale

Regular use of tap water can cause the mineral deposits in water to settle and limescale to form.
It must be removed depending on the water hardness and frequency of use.

Note:

If you use distilled water, there is no need to remove limescale.
The table below shows the recommended intervals of removing limescale – see the column “Number of fillings”.

Note:

Ask your supplier for the information about the water hardness.

1. Make sure the steam cleaner is switched off and disconnected from the power socket.
2. Mix around 10g of citric acid with water, stir well to dissolve the acid. Or you can mix a solution of white vinegar and water in the ratio 2:3.
3. Unscrew the safety cup and pour water with acid or vinegar solution into the water tank.
4. Leave on (depending on the water hardness for up to 6 hours) and then pour out the water.
5. Repeat if needed.
6. Thoroughly rinse with clean and cold water to remove the rest of the limescale.

Safety cap O-ring

If the safety cap O-ring is damaged, it must be replaced for a new one.
Remove the damaged o-ring and attach a new one. Make sure it is safely attached and it does not obstruct when screwing the cap.
Warning:

Never use the safety cap with a damaged O-ring.

Outer surface and accessories

Wipe the outer surface of the steam cleaner and accessories with a slightly damp, soft cloth. Wipe dry.
The brush nozzle cloth is washable. You can wash it after each use, or if needed according to the instructions on the label. The cloth is not suitable for dryer.

Cleaning the steam nozzle

Regularly clean the steam nozzle to prevent from clogging or blocking.

Storage

Before storing, make sure that the appliance and its accessories are cool and clean. Store the appliance and its accessories in a dry and well-ventilated place out of the reach of children or pets.
Do not place any objects on the appliance.

TROUBLESHOOTING

Insufficient pressure and

amount of steam.

| The steam nozzle is blocked.| Clean the steam nozzle according to the instructions above.
No steam.| Tank is empty.| Fill the water tank.
Enable to press the steam button.| The safety lock is in LOCK position.| Press the safety lock and then the steam button.
Water drops from steam output.| The steam cleaner has been tilted.| Do not tilt the steam cleaner more than 30°.
Water tank is overfilled.| Fill the tank only with the maximum amount of water (300 ml).

If the problem is not listed in the table above or if the problem persists, switch off the appliance, disconnect the plug from the electrical outlet and contact an authorized service center.

The use of the WEEE Symbol indicates that this product should not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment.

For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider, or the shop where you purchased the item.

This product meets all of the related basic EU regulation requirements. The EU declaration of conformity is available on www.alzashop.com/doc.

This product sold in the European Union meet the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS).

Alza.cz, a. s., Jankovcova 1522/53, 170 00 Prague 7, Czech Republic
© 2022 Alza.cz, a. s. All Rights Reserved.

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza | Alzashop.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>