PRO AQUA 850009947376 PRO-E-SF20 Whole House Salt-Free Water Softener Conditioner Instruction Manual
- June 13, 2024
- PRO AQUA
Table of Contents
PRO AQUA 850009947376 PRO-E-SF20 Whole House Salt-Free Water Softener
Conditioner
Product Information
The SF System is a water filtration system designed to provide clean and purified water for residential use. It is part of the Elite System, which includes additional components for enhanced water treatment. The SF System is installed downstream of the Elite System and is equipped with a tank and various fittings for connecting to the home’s plumbing system.
Key Features
- Downflow and upflow inlet options for flexible installation
- Optional fittings included for different plumbing configurations
- Easy-to-use bypass system for servicing
- Durable construction with o-rings and adapter nut for secure connections
- Water flow arrows and installation arrows for proper setup
Product Usage Instructions
- Before starting the installation, turn off the feed water main.
- Mount the Elite System to the wall, ensuring that it is level.
- Position the SF Tank approximately 8-10 inches from the Elite System OUT port.
- Lubricate the o-rings on the bypass and elbow fittings.
- Connect the Bypass to the SF Head.
- Connect the Elbows to the Bypass.
- Connect a Flex hose (provided) from the OUT port of the Elite System to the UPFLOW INLET elbow on the SF System.
- Connect the incoming water line to the IN port on the Elite System.
- Connect the OUT/DOWNFLOW INLET port on the SF System to the pipe going into your home.
- Ensure the Bypass is in Service Position.
- Slowly turn on the main feed water line.
- Check for leaks. If any, turn off the main water and address the issue. Contact a licensed plumber if needed.
- Locate the nearest faucet to the system, remove the screen, and open the cold water for 10-15 minutes.
- Done – Your system is now ready for use.
Note : It is recommended to install a system shutoff valve and bypass for easy servicing. Additionally, complying with local electrical laws by installing a ground jumper cable is advised. For proper installation, it is highly recommended to have this unit installed by a licensed professional. The warranty will be voided if the system is installed or used outdoors or improperly.
Installation
- Turn off the feed water main before proceeding.
- Mount the ELITE System to the wall. Ensure the system is leveled.
- Position the SF Tank approximately 8-10″ from the ELITE System “OUT” port.
- Lubricate the o-rings on the bypass and Elbow Fittings. (Fig 3.)
- Connect the Bypass to the SF Head. (Fig 3.)
- Connect the Elbows to the Bypass. (Fig 3.)
- Connect the 1”x1” NPT adapter to the Elite System “OUT” port.
- Connect a Flex hose (provided) from the “OUT” port of the ELITE System to the “UPFLOW INLET” elbow on the SF System.
- Connect the incoming water line to the “IN” port on the ELITE System. (Fig 1.)
- Connect the “OUT/DOWNFLOW INLET” port on the SF System to the pipe going into your home. (Fig 1.)
- Ensure the Bypass is in “Service Position.” (Fig 2.)
- Slowly turn on your main feed water line.
- Check for leaks. If any, turn off the main water and address the issue. Contact a licensed plumber if needed.
- Locate the nearest faucet to the system, remove the screen, and open the cold water for 10-15 min.
- Done : Your system is now ready for use.
INSTRUCTIONS
- Installing a system shutoff valve and bypass is recommended for servicing.
- Installing a ground jumper cable is also recommended to comply with your local electrical laws.
- Install this system according to your local laws. It is highly recommended to have this unit installed by a licensed professional.
- Outdoor and improper installation or usage vvoidthe warranty.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>